User manual

10
Introduction
Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
* Do not expose the remote sensor of the Blu-ray Disc™
player to a strong light source such as direct sunlight
or other illumination. If you do so, you may not be able
to operate the Blu-ray Disc player via the remote
control.
Notes:
Direct the remote control at the remote sensor of the Blu-ray
Disc™ player.
When using the remote control, press the buttons at intervals
of about 1 second to ensure the correct mode of operation.
Do not drop or give the remote control a shock.
Do not leave the remote control near an extremely hot or humid
place.
Do not spill water or put anything wet on the remote control.
Do not open the remote control.
If the remote control is not going to be used for a long time,
remove the battery to avoid damage caused by battery leakage
corrosion.
POWER
GOTO Clear
Distance:
About 5 m from the
front of the remote
sensor.
Angle:
About 30° in each
di r ec ti o n o f t he
front of the remote
sensor.