User's Manual

Getting Started

Loading the battery

Close the slot cover and port cover securely.

If any cover is not closed or is not closed completely, the camcorder

will no longer be waterproof. When closing a cover, make sure that

no foreign object such as sand, hair, dust, etc. is caught in the rubber

seal.

Removing the battery

To remove the battery:

1 While pressing down on the slot cover release latch, slide the

slot cover out and open.

(Sample Illustration) Opening the battery/media card slot cover

2 Slide the battery clip down.

The battery pops out slightly from the slot.

3 Pull the battery straight out.

(Sample Illustration) Removing the battery

4 Close the battery/media card slot cover. Secure the cover by

sliding it back into place.