User's Manual

22
Getting Started
Loading the battery
Remove moisture from all camcorder surfaces
Moisture may get inside the camcorder while opening a cover if
moisture adhering to the crevices in the slot cover and port cover is
not properly wiped off.
To completely remove all moisture, follow the steps below:
1 Gently shake the camcorder to shake off excess water drops.
(Sample Illustration) Gently shaking water off the camcorder
2 Wipe off any moisture from the area around the cover with a
soft cloth.
Make sure that water does not get inside the camcorder
when opening the cover.
(Sample Illustration) Wiping moisture off the slot cover
If there is any moisture adhering inside the cover, wipe it
off completely.
(Sample Illustration) Wiping moisture off the inside of the slot cover