User's Manual

Getting Started

Inserting and removing a media card

An SD™ Card must be purchased separately.

To install a media card:

1 While pressing down on the slot cover release latch, slide the

slot cover out and open.

2 Insert a memory card into the slot until it locks into place as

shown below.

(Sample Illustration) Inserting the media card

3 To remove an installed media card, gently press the card

inward to release it.

The card pops out slightly.

4 Pull the card straight out.

(Sample Illustration) Removing the media card

5 Close the battery/media card slot cover. Secure the cover by

sliding it back into place.

NOTE