User's Guide

17
Getting Started
Inserting and removing a Micro SD™ Card
To charge your camcorder through the supplied USB cable, follow
these steps:
1 Connect your camcorder’s mini USB port to a USB port on
your computer, with the supplied USB cable.
The blinking light indicates that the battery is currently charging;
the light glows continuously once charging is completed.
Charging the battery through the USB cable takes approximately 5
hours. (Actual charging time will vary, depending on battery
condition and charging conditions, including power availability
from the computer’s USB port.)
Never charge the battery by a method other than as instructed. Doing
so may cause a fire or explosion possibly resulting in serious injury.
Inserting and removing a Micro SD™ Card
A Micro SD™ Card may need to be purchased separately.
Your camcorder comes with a Micro SD™ Card slot that allows
you to expand the camcorder’s memory capacity with an optional
Micro SD™, Micro SDHC™, or Micro SDXC™ memory card.
1 Open the ports cover.
2 Insert the Micro SD™ card (optional) into the slot until it locks
properly.
3 To remove the Micro SD™ card, press inward to release it and
gently pull it out.
4 Close the ports cover.
(Sample Illustration) Inserting / removing a Micro SD™ Card
NOTE
To remove the
Micro SD™ Card,
press inward to
release it. When
the card pops out,
grasp it and pull it
straight out.