User's Guide

Getting Started

Inserting and removing an SD™ Card (optional)

❖ The battery pack is lithium ion batteries, which can explode if not

replaced, used, handled or disposed of properly. Dispose of the

battery as required by local ordinances or regulations. Use only

batteries recommended by TOSHIBA as replacements.

❖ Charge the battery pack only in an ambient temperature between

5 and 35 degrees Celsius. Otherwise, the electrolyte solution

might leak, battery pack performance might deteriorate and the

battery life might be shortened.

❖ Never install or remove the battery pack without first turning off

the power and disconnecting the AC adaptor.

Inserting and removing an SD™ Card (optional)

An SD™ Card must be purchased separately.

Your camcorder comes with internal memory that allows you to

store photos and videos. You can expand the memory capacity by

using an optional SD/SDHC/SDXC memory card.

1 Open the SD™ Card cover.

2 Insert the SD™ Card into the slot until it locks into place, as

shown below.

(Sample Illustration) Inserting and removing an SD™ Card

When a memory card is inserted, videos and photos are saved to the

card rather than the built-in memory.

NOTE

SD™ Card

SD™ Card cover

To remove the SD™ Card press

inward to release it. When the

card pops out, grasp it and pull

it straight out.

NOTE