Instruction Manual

 Photo Frame (Picture Record Mode Only)

Your camera features popular electronic photo frame. You can take your picture with preferred

electronic photo frame. To enable Photo Frame:

1. When in Camera Mode, use Up/Down Buttons to select Photo Frame option, then press Enter

Button to switch to Photo Frame submenu.

2. Use Up/Down Buttons to locate preferred photo frame. Then select Set option and press Enter

Button to validate the setting and exit.

Display Screen Photo Frame Option

 Flash (Picture Record Mode Only)

This camera has two flash settings. To change flash setting by either hot key (Right Button) or

Option Setting.

Auto-flash( )：the flash fires automatically according to light conditions. Use this mode for

general photography.

Flash Off( )：the flash will not fire under any circumstances. Use this mode when taking

images in a place where flash photography is prohibited, or when the subject is distant (beyond

the range of the flash).

Enter Button