Operation Manual
User’s Manual EN-19
CANVIO AEROCAST WIRELESS HARD DRIVE
On/Off button:
■ Press and hold for 2 seconds: Wireless LAN mode turns ON.
■ Press and hold for 2 seconds again: Wireless LAN mode turns OFF.
USB 3.0 port:
■ Compatible with USB 3.0 and USB 2.0.
■ Allows for data transfer between a computer and the Canvio AeroCast
Wireless Hard Drive, when connected.
■ Allows you to charge the product battery when connected to the AC
adaptor.
Battery Indicator light:
■ Green: 30% or more available battery power.
■ Yellow: 10%-30% remaining battery power.
■ Orange (blinking fast): the product is out of battery power or the
operating temperature is too high. the product will shut down after 30
seconds.
■ Green or Yellow (blinking slowly): The battery is charging.
■ Green (Not blinking): Finish charging
■ Green or Yellow (blinking fast): The product is shutting down or turning
ON.
■ LED Off: The device is powered OFF.
Wireless LAN/HDD indicator:
■ Wireless LAN Mode
■ Blue: Wireless LAN is ON (no data access).
■ Blue (blinking): Wireless LAN is ON (storage access available).
■ Blue (turned off): Wireless LAN is OFF.
■ USB Mode
■ White: No data access.
■ White (blinking): Data access available.
■ White (turned off): The device is in Sleep or Standby mode. It is safe
to disconnect the device.
SD™ Card indicator:
■ Only glows in Wireless LAN Mode
■ Violet: No SD™ Card access.
■ Violet (blinking): SD™ Card access available.
■ Violet (turned off): SD™ Card is in Standby.
If the battery is too low, you cannot turn the Canvio AeroCast Wireless
Hard Drive ON. The battery indicator will blink Orange for 6 seconds, and
then turn off.
NOTE