Operation Manual

22
Getting Started
Connect wirelessly to a PC/Mac
❖ Connect to the Internet while connected to the Canvio
Cast™ Wireless Adapter
4 To power off the Canvio Cast™ Wireless Adapter, unplug the
AC adapter from the power supply.
(Sample Illustration) Unplugging the Canvio Cast™ Wireless
Adapter
Connect wirelessly to a PC/Mac
1 Press the ON/OFF button to power on the system.
2 Once the Wi-Fi
®
indicator light stops blinking, enable the
Wireless LAN feature on your PC/Mac and open the Wireless
Network connection.
3 Select the
Toshiba wssd xxxx wireless connection (where
xxxx is a 4-digit number generated by your Canvio Cast™
Wireless Adapter (default wireless SSID: Toshiba wadpxxxx),
and then enter a password if one has been established.
File copy wirelessly to PC
You can wirelessly transfer files from the storage device attached to
the Canvio Cast™ Wireless Adapter to a PC once the drive has been
mapped.
1 To map the drive, on your PC, go to
Computer, and then
Map Network Drive.
2 Select a letter from the
Drive drop down menu.
3 In the Folder field, type
\\xxx.xxx.xxx.xxx\share (where
xxx.xxx.xxx.xxx is your Canvio Cast™ Wireless Adapter’s IP
address) and click
Finish.