User's Manual

86 Video Telephony
Answering a Video Call
When a video call is received, the ringtone plays, the external light flashes and “Video
Call” appears on the display.
1. A video call is received.
To check your image before beginning the call, press (Options) when the call
is received, select Self-view and press (Select).
2. Press .
When a connection is established, both you and the other party see each other’s
image and can begin talking. The sound automatically switches from the earpiece
to the speaker, thus enabling you to begin a handsfree call. However, if the phone
profile (page 222) is set to Silent when a video call is received, the caller’s voice is
heard from the earpiece. To switch the sound from the earpiece to the speaker,
press ( ) during a call.
To set image transfer from the camera to off so as you can answer the call as a
voice call, press instead of . During the voice call, the substitute picture
set in the Outgoing Video settings (page 91) is sent to the other party.
3. Press to end the call.
Tip
• The procedures for rejecting calls
(page 40), diverting calls (page 49),
Any Key Answer (page 240) and
Open to Answer (page 240) are
identical to those for voice calls.
• To place an incoming call on hold,
press . To answer a call placed
on hold, press (Unhold).