Manualshelf

User's Manual

ManualsBrandsToshiba ManualsCell PhonesMobile Phone with UMTS/GSM/DCS/PCS & Bluetooth
81828384858687888990
220
Settings
Setting the Display of Cell Information
You can set whether the cell information sent from a base station is displayed in
standby mode when you use your phone on a mobile phone network based on Micro
Cellular Network (MCN) technology.
1. In standby mode, press , select Settings and press (Select).
2. Select Display Settings and press (Select).
3. Select Main Display and press (Select).
4. Select Cell Information and press (Select).
5. Select On or Off and press (Select).