User's Manual

222 Settings
Phone Profiles
This feature allows you to change the sound and vibration to match your surrounding
conditions. Your phone has four preset profiles. You can change the sound and vibration
settings of each profile.
Normal: Profile for ordinary use.
Silent: Profile for when you do not want your phone to emit any sound.
Car: Profile for using handsfree while you are driving.
Meeting: Profile for meetings, etc.
Switching Profiles
1. In standby mode, press , select Settings and press (Select).
2. Select Phone Profiles and press (Select).
3. Select the profile you want to set and press .
If a profile other than Normal is set, the indicator ( / / ) for the profile
appears at the top of the display.
Note
When your phone is connected to an
in-car device or a wireless headset
via Bluetooth™, the incoming
ringtone for Bluetooth™ plays and
your phone does not vibrate for
incoming calls regardless of the
phone profile settings.
Tip
• To temporarily switch the phone
profile to Silent, press and hold
in standby mode. To switch
back to previous profile, press and
hold in standby mode.
• You can also set the ringtone and
vibration individually for each
Contacts list entry (page 67) and
each Contacts list category (page
69). When the ringtone and
vibration are set for both individual
entries and categories, the settings
for individual entries take priority
over the settings for individual
categories. However, when the
phone profile is set to Silent, the
ringtone does not play.