User's Manual

Do not pull, bend with excessive force or twist the cords of AC
adapter (sold separately) and DC adapter (sold separately)
Do not damage or modify them
Do not place objects on them
Do not apply heat and keep them away from heaters
Damage to a cord may cause electric shock, overheating or fire.
Do not plug or unplug AC adapter (sold separately) with wet
hands
Doing so may cause electric shock or malfunction.
Keep magnetic cards away from handset and make sure that a
magnetic card is not trapped when closing handset
Failing to do so may cause the magnetic data on a cash card, credit
card, telephone card or floppy disk to be lost.
Do not use handset in a vehicle if it affects in-vehicle electronic
devices
Use of handset in some types of vehicles may, in some rare cases,
affect in-vehicle electronic devices and interfere with safe driving.
Do not place handset on an unstable or unlevel surface
Doing so may result in handset falling and causing injury or
malfunction. Be particularly careful when vibration is set.
Do not dispose of the used battery with ordinary garbage
Insulate the terminal with tape and then dispose of the used battery
separately from ordinary garbage or take it to your nearest au shop.
Be sure to observe local regulations on the separate collection of
used batteries, wherever applicable.
Do not touch handset with sweaty hands or place it into a
pocket of sweaty clothes
Sweat and humidity may erode the internal components of handset
and cause overheating or malfunction.
Do not use DC adapter (sold separately) when the car engine is
not running
Doing so may result in a flat battery.
If the fuse for DC adapter (sold separately) blows, replace it
with a designated fuse
Replacing the fuse with other than a designated fuse may cause
overheating and fire.
For details on replacing the fuse, refer to the instruction manual of
DC adapter (sold separately).
If your skin becomes irritated, immediately stop using handset
and consult with a dermatologist
The following materials and surface treatments have been used
for handset. Some of these materials may cause itching, irritation,
eczema, etc. in some rare cases depending on the individual's
constitution and physical condition.
Part Material (Surface Treatment)
Outer housing(outer frame) PC resin (UV cured acrylic coating)
Outer housing(outer window) PC resin (UV cured acrylic coating)
Outer housing(inside panel) PA resin (UV cured acrylic coating)
Outer housing(keypad side) PA resin (UV cured acrylic coating)
Outer housing(battery side) PC resin (UV cured acrylic coating)
Battery pack cover PC resin (UV cured acrylic coating)
Triangle window(outer side) PC resin (UV cured acrylic coating)
Triangle window(battery side) PET resin (UV cured acrylic processing)
Upper screw cover PET resin (UV cured acrylic processing)
Lower screw cover PC resin (UV cured acrylic coating)
Display panel Tempered glass (UV cured acrylic
processing)
Clearance keeper UV cured Urethane resin (UV cured acrylic
coating)
External Device Port connecter
cap
PC resin, Elastomer resin (UV cured acrylic
coating)
Camera, Infrared port panel Acrylic resin (UV cured acrylic processing)
Softkey, MF key PC resin (UV cured acrylic coating)
Charger Terminals Stainless steel (gold plating, nickel
undercoat, rhodium plating)
145