User manual
Table Of Contents
- Notice to Users
- Lineup of Our Manuals
- Before Reading This Manual
- CONTENTS
- Toshiba Quality is Second to None
- Features of the e-STUDIO2500c/3500c/3510c
- General Precautions
- Disclaimer Notice
- Forgery Prevention Function/Storage of Color Copies
- BEFORE USING EQUIPMENT
- HOW TO MAKE COPIES
- SETTING OF BASIC COPY MODES
- IMAGE ADJUSTMENT
- USING THE EDITING FUNCTIONS
- e-FILING
- TEMPLATE
- JOB STATUS
- BLINKING GRAPHIC SYMBOLS
- Blinking Graphic Symbols
- Drawer Display on the Touch Panel
- Replace Toner Cartridge Symbol
- Replace Toner Bag Symbol
- Jam Symbols
- Misfeed in the Reversing Automatic Document Feeder (optional)
- Misfeed in drawer feeding area
- Misfeed in the Large Capacity Feeder (optional)
- Misfeed in the Paper Feed Pedestal (optional)
- Misfeed on the bypass tray
- Misfeed in the automatic duplexing unit
- Misfeed in the jam releasing cover
- Misfeed in the fuser unit
- Misfeed in the Bridge Unit (optional)
- Misfeed in the Finisher and the Hole Punch Unit (optional: MJ-1101, MJ-6101)
- Misfeed in the Saddle Stitch Finisher and the Hole Punch Unit (optional: MJ-1030, MJ-6004)
- Misfeed in the Saddle Stitch Unit (optional)
- Call Service Symbol
- WHEN THIS MESSAGE APPEARS
- “Toner near Empty”
- “Time for Slit glass and Main charger cleaning”
- “Check staple cartridge”
- “Check staple cartridge in the Saddle Stitch Unit”
- “Examine stapler”
- “READY (CHECK STAPLER)”
- “Examine stapler in the Saddle Stitch Unit”
- “READY (CHECK SADDLE STITCH STAPLER)”
- “READY (HOLE PUNCH DUST BIN IS FULL)”
- “POWER FAILURE”
- “Time for periodic maintenance”
- “Check paper size setting on control panel for drawer N”
- “Cannot print this paper size Select the other drawer”
- “Cannot print this paper type Set the other paper type”
- “Reboot the machine”
- MAINTENANCE
- SPECIFICATIONS & OPTIONS
- INDEX
2 HOW TO MAKE COPIES
74 Making Copies
3
Select the copy modes as required. When you want to copy more
than one set, key in the desired number of copies.
y Press the [CLEAR] button on the control panel to correct the number keyed in.
y Note that some combinations of copy modes are restricted. ( P.382 “Copying Func-
tion Combination Matrix”, P.384 “Image Quality Adjustment Combination Matrix”)
y Once the [START] button on the control panel is pressed, any change in copy modes
(including setting of the previously divided sets of originals) cannot be applied after-
ward.
Placing an original on the original glass
1
Place paper in the drawer(s).
For the types and sizes of paper selectable, see P.51 “Acceptable copy paper”.
When the desired size or type of paper is not in any of the drawers or the Large Capacity
Feeder, see the following pages.
P.53 “Setting copy paper (size change)”
P.62 “Placing paper in the Large Capacity Feeder (optional)”
P.81 “Bypass Copying”
4
Press the [START] button.
y Copying starts. The paper exits with
its copied side down.
y When the drawer runs out of paper
during copying, the corresponding
drawer on the touch panel and the
[JOB STATUS] button on the control
panel blink. Add paper to this drawer
or select another one with the same
paper size.
y Be careful because the paper exit
area and paper just after exiting are
hot.