Document Operator´s Manual for Basic Function Manager Networking Documents.
EPA ENERGY STAR ® (MFD) The United States Environmental Protection Agency (EPA) has introduced a voluntary programme, the ENERGY STAR programme, to encourage the widespread and voluntary use of energy-efficient technologies that enhance the workplace, improve product performance and prevent pollution. As an ENERGY STAR Partner, the TOSHIBA TEC CORPORATION has determined that this copier model meets the ENERGY STAR guidelines for energy efficiency.
TABLE OF CONTENTS NOTICE TO USERS................................................................................................................................5 TOSHIBA QUALITY IS SECOND TO NONE ..........................................................................................6 PREFACE................................................................................................................................................8 FEATURES OF THE e-STUDIO3511/4511 ....................................
• Sort/Group Copying .......................................................................................................................78 • Rotate Sort Mode...........................................................................................................................79 • Staple Sorting ................................................................................................................................80 • Magazine Sort & Saddle Stitch Mode (Booklet Mode)..........................
9. JOB STATUS .....................................................................................................................................183 1. JOB STATUS .................................................................................................................................184 2. PRINT JOB LIST............................................................................................................................185 3. PROOF PRINT JOB ..................................................
4
NOTICE TO USERS Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 1 Do not touch the connector terminal when disconnecting the cables of peripheral equipment. 2 Before opening any covers or removing any parts from the copier, discharge the static electricity from your body by touching a metal part of the copier.
TOSHIBA QUALITY IS SECOND TO NONE e-STUDIO3511/4511 Toner Cartridges. It is recommended that genuine TOSHIBA supplies and parts be used to obtain optimum results.
Supplies/Parts - Dependability Genuine Toshiba supplies are subjected to the strictest of inspections so that every supply you receive will perform at optimal levels. - High Productivity Genuine Toshiba supplies are created to meet the demands of our competitive world and provide highspeed reliable trouble-free copies when you need them. - Stable Image Quality Genuine Toshiba supplies are designed to provide consistently stable image output.
PREFACE Thank you for purchasing the Toshiba Colour Capable Departmental Systems e-STUDIO3511/4511. This Operator’s Manual describes the following: - How to use the Colour Capable Departmental Systems. - How to inspect and carry out maintenance on the Colour Capable Departmental Systems. - How to remedy mechanical and copying problems. Before using the Colour Capable Departmental Systems, thoroughly read and understand this Operator’s Manual.
FEATURES OF THE e-STUDIO3511/4511 The e-STUDIO3511/4511 is a Colour Capable Departmental Systems that is environmentally friendly, compact, and comes at a reasonable price. The e-STUDIO3511/4511 combines black-and-white and colour copy modes and is capable of using each function via networks. The e-STUDIO3511/4511 also has various optional paper handling devices to meet the needs of your office. The e-STUDIO3511/4511 offers the following convenient features, functions and options.
GENERAL PRECAUTIONS When Installing or Moving Warning - This Colour Capable Departmental Systems requires 220-240 V AC 50/60 Hz electric power. For Saudi Arabia 100V version, it requires 100-127 V AC 50/60 Hz electric power. DO NOT use a power supply with a voltage other than that specified. Avoid multiple connections in the same outlet. This could cause a fire or give you an electric shock. If you are considering increasing the number of outlets, contact an electrician.
Caution - DO NOT tilt the Colour Capable Departmental Systems more than 10 degrees when moving it. If it falls, this could result in personal injury. - Avoid placing the Colour Capable Departmental Systems in a place unsuitable for its weight and also make sure the surface is level. Remember that if the Colour Capable Departmental Systems falls over, serious injuries could result. Weight of the Colour Capable Departmental Systems: approx.
GENERAL PRECAUTIONS (Cont.) Other Points - Make sure that there is enough space around the system to facilitate changing of parts and maintenance. If there is insufficient space, some operations, such as bypass feeding, will become difficult and the Colour Capable Departmental Systems could even break down. To insure optimal operation, allow clearances of at least 80 cm on the right, and 10 cm on the left and behind (refer to the illustration below).
When Using the Colour Capable Departmental Systems Warning - DO NOT place metallic objects or containers with water (flower vases, coffee cups, etc.) on or near the Colour Capable Departmental Systems. And keep paper clips and staples away from the air vent. This could cause a fire or give you an electric shock. - If the Colour Capable Departmental Systems becomes excessively hot, smoke comes out of it or there is an odd smell or noise, proceed as follows.
GENERAL PRECAUTIONS (Cont.) Other Points - Be very careful to treat the touch panel gently and never hit it. Breaking the surface could cause malfunctions. - DO NOT turn the main switch OFF with jammed paper left inside the Colour Capable Departmental Systems. This could cause malfunctions when the main switch is turned ON next time. - Be sure to turn the main switch OFF when leaving the office or if there is a power outage. However, DO NOT turn the main switch OFF if the weekly timer is in use.
During Maintenance or Inspection Warning - NEVER attempt to repair, disassemble or modify the Colour Capable Departmental Systems by yourself. You could cause a fire or get an electric shock. ALWAYS contact your Service representative for maintenance or repair of the internal parts of the Colour Capable Departmental Systems. - ALWAYS keep the plug and outlet clean. Prevent them from accumulating dust and dirt.
GENERAL PRECAUTIONS (Cont.) When Handling Supplies Caution - NEVER attempt to incinerate toner cartridges. This could cause an explosion. DO NOT dispose of used toner cartridges. Your service technician will collect them. "3.
DISCLAIMER NOTICE The following notice sets out the exclusions and limitations of liability of TOSHIBA TEC CORPORATION (including its employees, agents and sub-contractors) to any purchaser or user (‘User’) of the eSTUDIO3511/4511, including its accessories, options and bundled software (‘Product’). 1 The exclusion and limitations of liability referred to in this notice shall be effective to the fullest extent permissible at law.
FORGERY PREVENTION FUNCTION/STORAGE OF COLOUR COPIES FORGERY PREVENTION FUNCTION This copier has a forgery prevention function. Please ensure that your digital full-colour copier is not used for making copies of prohibited items. STORAGE OF COLOUR COPIES 1 The copies should be kept in a place which is not exposed to light to prevent fading when they are stored for a long time.
1. BEFORE USING EQUIPMENT 1 1. DESCRIPTION OF EACH COMPONENT ...........................................................................20 Main Components ................................................................................................................20 Optional Equipment .............................................................................................................21 Control Panel ...............................................................................................
1. DESCRIPTION OF EACH COMPONENT Main Components 1 1: Front cover 2: Drawers 3: Operator’s manual pocket (back side) 4: Power switch 5: Automatic duplexer 6: Bypass tray 7: Original scale 8: Inner tray 9: Colour of toner (Cyan/Magenta/Yellow) 10: Control panel 11: Touch panel 12: Touch panel contrast adjustment volume 13: Black toner 14: Used toner bag *1, *2: Optional *2 3 4 1 5 2 6 *1 7 10 8 13 9 20 1.
Optional Equipment 1 1 7 2 10 3 8 4 5 6 9 1 : Original cover (KA-3511) Holds an original. 2 : Reversing automatic document feeder (MR-3015) Automatically feeds a placed stack of originals one by one to have them copied. 3 : Key copy counter (MU-8, MU-10) Records or accumulates the number of output pages separately for each person or group. 4 : Large capacity feeder (KD-1012) Feeds up to 2,500 sheets of A4 paper (80 g/m2) (recommended by Toshiba) continuously.
1.DESCRIPTION OF EACH COMPONENT (Cont.) 1 10: Hole punch unit (MJ-6004) Makes punching holes on output pages. We have other options: Work table (KK-3511), Fax board (GD-1150), Fax board 2nd line (GD-1160), Expansion memory (GC-1180), Wireless LAN adapter (GN-1010), Scrambler board (GP-1030) Contact your service technician or representative for the details. 22 1.
Control Panel When operating the equipment and specifying the various settings through the equipment itself, use the buttons on the control panel. 1 1 : [HELP] button When pressing this button, appropriate operation procedures are displayed. 2 : [USER FUNCTIONS] button Press this button to set the paper size of the drawer, the drawer for special use, or to set/register the settings including such as the change of the default setting of the copy, scan and Fax functions. See the [User Function Guide].
1.DESCRIPTION OF EACH COMPONENT (Cont.) 1 9 : PRINT DATA/MEMORY RX/FAX communication If these lamps light, they show the status of receiving data, receiving original(s) standing by to be printed and currently used telephone line (1 or 2). 10: [INTERRUPT] button Use this button to interrupt the copying job in process and to perform another copying job. You can resume the interrupted copying job by pressing this button again.
Adjustment of the Angle of the Control Panel When Adjusting the Angle of the Control Panel 1 The angle of the control panel is adjustable at any angle from 5 to 45 degrees from the horizontal position (at the time of installation). * When changing the angle of the control panel, be careful not to let your hands be caught in the gap between the equipment and the control panel. This could injure you.
1.DESCRIPTION OF EACH COMPONENT (Cont.) 1 shift the stopper to the right, and 1 Slightly then pull it out. the latches of the stopper in the hole of 2 Fit the position (2) and insert them turning the stopper itself. 3 Shift the stopper to the left until it clicks. - The angle of the control panel is fixed at 7 degrees. 26 1.
Touch Panel When the power is turned on, and ‘READY’ is displayed, the basic screen of the copy function is shown on the touch panel. On the screen, currently set functions, selected functions and the copier status are shown via messages and illustrations. 1 * The contents of the touch panel screens in this manual show the equipment with all options.
1.DESCRIPTION OF EACH COMPONENT (Cont.) 1 - [SETTINGS] (set functions confirmation) button This button allows you to confirm the functions that have been set. (An example is shown below.) - The icons displayed on the screen are as follows (some icons may not appear on the screen): 28 1.
Clearing the Functions Selected 1 If you press any button that is half-tone shaded, the function selected is cleared. Also, if the copier is left inactive for a while, the automatic function clear works and the setting will be cleared.
2. TURNING ON THE POWER SWITCH Turning on/off the Power 1 Turning on the Power Switch the switch cover, and then turn ON 1 Open the power switch. - “Wait Warming Up” appears on the Basic screen on the touch panel. 40 seconds later, the equipment 2 About will be ready. - “READY” appears on the Basic screen. - While the copier is warming up, you can use the Auto Job Start function. "4.
the [USER] button to enter the user 2 Press setting menu, and then press the 1 [SHUTDOWN] button. job will be deleted. Are you 3 “Processing sure you want to shutdown?” appears on the screen. Press the [YES] button. - To cancel the shutdown operation, press the [NO] button. in progress” appears on the 4 “Shutdown screen, and then the equipment is shut down. - The power switch automatically returns to the OFF position.
2.TURNING ON THE POWER SWITCH (Cont.) Controlling the Use of the Copier with Department Codes 1 With the use of the department codes, you can restrict users as well as manage copy volumes made by individual groups or departments of your company. See the [User Function Guide]. * The department codes and the key copy counters ("Controlling the Use of the Copier Using the Optional Key Copy Counter" Page 33) cannot be used together.
Controlling the Use of the Copier Using the Optional Key Copy Counter When the optional key copy counter is available, you can only make copies by inserting your key copy counter. When you make copies with your key copy counter inserted, the number of copies made is recorded (or added up) in the counter. Any number of key copy counters can be used. 1 * For instructions on how to use the key copy counter, consult your service technician.
3. SWITCHING TO THE ENERGY-SAVING MODE 1 If you are not going to use the equipment for a while, press the [ENERGY SAVER] button on the control panel for a few seconds to enter the energy saving mode. In this mode, the display and lighted button on the control panel are turned off and the [ENERGY SAVER] button lights in green. To start the equipment again, press the [ENERGY SAVER] button (or [COPY], [SCAN], [FAX], [e-FILING], [START] button on the control panel).
2. HOW TO MAKE COPIES 2 1. SETTING COPY PAPER .....................................................................................................36 Acceptable Copy Paper Types and Sizes ............................................................................36 Toshiba-Recommended Paper/Handling and Storing Paper ...............................................37 Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses.....................38 2. SETTING ORIGINALS........................
1. SETTING COPY PAPER Acceptable Copy Paper Types and Sizes Feeder 2 Drawers (The optional drawers included) Paper Type Paper Size Plain Paper (Standard Size) A/B format: A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO (210 x 330 mm) LT format: (64-80 g/m2) Thick 1 (81-105 g/m2) Maximum sheet capacity 600 sheets (64 g/m2) 550 sheets (80 g/m2) 450 sheets (81-105 g/m2) * Height: approx. 60.
Toshiba-Recommended Paper/Handling and Storing Paper The recommended paper To make copies with a fine image, the following sheets are recommended. If you use copy paper other than the recommended types, ask your service technician.
1.SETTING COPY PAPER (Cont.) Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses The paper size of the drawer can be changed. The drawers can also be set for cover sheet, insertion, thick paper 1, Fax and special sheets. 2 Changing the Paper Size of the Drawer out the drawer carefully until it comes 1 Pull to a stop.
pushing the size selection lever in 4 While the direction of the arrow, set the side guide to the desired paper size (indicated on the bottom inner surface of the drawer). 2 - Adjust the side guides with both hands. the arrow part (left side) to lock the 5 Push size selection lever. 6 Place paper in the drawer(s). - Place paper face up. - Maximum number of sheets that can be set. "Acceptable Copy Paper Types and Sizes" Page 36 - Fan the paper well before placing it in the drawer.
1.SETTING COPY PAPER (Cont.) the size mark plate to match with 8 Change the size of paper that has been set. 2 the [USER FUNCTIONS] button on 9 Press the control panel. the [USER] button, then press the 10 Press [GENERAL] button on the touch panel. 11 Press the [DRAWER] button. 40 2.
Press the drawer icon corresponding to 12 the one which the paper size has been changed, and then press the button indicating the new paper size. 2 Setting the Drawer for Special Uses You can set the drawer for various uses (cover sheet, sheet insertion, thick paper, Fax paper, special sheets). - Acceptable copy paper "1.SETTING COPY PAPER" Page 36 - Drawer for cover sheet "9.COVER COPYING" Page 122 - Drawer for sheet insertion "10.SHEET INSERTION MODE" Page 125 - Drawer for special sheets.
1.SETTING COPY PAPER (Cont.) the [USER] button to enter the user 3 Press menu and then press the [GENERAL] button. 2 4 Press the [DRAWER] button. the drawer button corresponding to 5 Press the one in which the paper size has been changed, and then press the button indicating the new paper type. - If you want to select the [COVER] or [INSERT] button, make sure that paper with the same size as that for the COVER or INSERT is set in the other drawer including the optional large capacity feeder. 42 2.
- Press [THICK 1] depending on the paper weight of the cover sheet, sheet insertion, and special sheet. In the case of cover sheet or sheet insertion, is displayed in the drawer button corresponding to the one in which the paper has been set. 2 * For example, when inserting 90 g/m2 paper, press the [INSERT] button, and press the [THICK 1] button. - The setting is completed as shown on the right. - 2 drawers can be set for the sheet insertion.
1.SETTING COPY PAPER (Cont.) Clearing the Drawer for Special Uses 2 the drawer button corresponding to 1 Press the one which is set for the special use, then press the corresponding button (thick, insert, cover, etc.) on the bottom line of the display. - If you clear INSERT 1 when both INSERT 1 and INSERT 2 are set, the drawer for INSERT 2 changes to INSERT 1. - Each of the buttons toggles the associated drawer on/off. - Replace the paper set in the drawer as required. 44 2.
2.
2.SETTING ORIGINALS (Cont.) Maximum Number of Sheets that can be Stored 2 46 Up to 1,000 sheets of A4 size can be stored per 1 job, or until the memory becomes full. When exceeding the above limit during the scanning, the following screen is displayed. The scanned data is printed by pressing the [YES] button and it is deleted by pressing the [NO] button. 2.
When Placing an Original on the Glass Sheet Originals the original cover or the reversing 1 Raise automatic document feeder (optional), and place the original face down on the glass. 2 (A) - Raise it 60 degrees or more for detecting the original. - A: Original the original against the left rear 2 Align corner of the glass. the original cover or the reversing 3 Lower automatic document feeder (optional) slowly.
2.SETTING ORIGINALS (Cont.) Book-type Originals 2 the original cover or the reversing 1 Raise automatic document feeder (optional), and place the original in the direction shown in the illustration. - When using the Book-type Originals->2-sided Copies ("5. Booktype Originals -> 2-Sided Copies" Page 91) or the Dual-Page ("4.DUAL-PAGE" Page 111) function, centre the book original on the yellow indicator line. the original cover or the reversing 2 Lower automatic document feeder (optional) slowly.
When Using the Reversing Automatic Document Feeder (optional) Precautions for Using the Reversing Automatic Document Feeder 1 2 3 4 5 6 7 8 Do not use the following type 1 to 8 of originals as they may misfeed or become damaged: : Only originals with the same width can be set at a time. (Do not mix originals with different widths.) : Badly wrinkled or folded originals; in particular, originals whose leading edge is curled may fail to be correctly fed.
2.SETTING ORIGINALS (Cont.) If the scanning area and guide area are dirty, it may cause black streaks, etc. on the printed paper. Cleaning them preferably once a week is recommended. See "Weekly Maintenance" Page 284 2 In the Continuous Feed Mode * See "Continuous Feed Mode" Page 133 * To set originals with the different size, see "Mixed-sized Originals" aligning the edges of originals, place 1 After the originals face up and align the slides to their width.
Inside the Single-feed Mode See "Single-feed Mode" 1 Page 134 Align the slides to the desired original size. 2 the original with its face up and 2 Insert straight along the slides, it will be pulled in automatically. - When the original starts being pulled in, let go of it.
3. GENERAL COPYING PROCEDURES After placing or confirming paper in the drawers, place the originals. When the [START] button is pressed with any settings unchanged, copies are made in the initial (default) settings. You can make copies as desired by setting different copy modes.
2 Place the original(s). - "Acceptable Original Types and Sizes/Maximum Number of Sheets that can be Stored" Page 45 - "When Placing an Original on the Glass" Page 47 - "When Using the Reversing Automatic Document Feeder (optional)" Page 49 2 When the reversing automatic document feeder (optional) is installed and the single feed mode is selected, place the original(s) after the copy mode is set. 3 Select the copy modes as required.
3.GENERAL COPYING PROCEDURES (Cont.) the next original, and press the 5 Place [START] button. 2 - Set the first page of your originals first. - You can also press the [YES] button to perform the same operation. - Repeat this step for the subsequent originals. the final original has been scanned, 6 Once press the [FINISHED] button. - Copying starts. The paper exits with its copied side down. When Coming Across the Situations below To make multiple sets of copies: - Key in the copy quantity.
4. AUTO JOB START (JOB PRESET) While warming up or multi-copying, you can reserve the copy. Setting Auto Job Start 2 1 Place the original(s). 2 Select the copy mode. Be sure that the job starts in the previous copy mode if you do not select the copy mode. 3 Press the [START] button. - Up to 6 jobs can be stored in the memory. Place the originals of the 6th job on the original glass or the reversing automatic document feeder (optional) and press the [START] button.
4.AUTO JOB START (JOB PRESET) (Cont.) Confirming and Canceling Auto Job Start 2 - Confirming auto job start and canceling the job waiting to be copied. Press the [JOB STATUS] button on the control panel to display the job list for confirming and canceling the data. See "1.JOB STATUS" Page 184 for canceling the job. - Canceling auto job start. Press the [STOP] button on the control panel to cancel the job during the scanning or in the status that the 6th job is being received to be stored. 56 2.
5. INTERRUPT COPYING While multi-copying is in progress, you can interrupt and make copies from different originals. * - The following modes cannot be used with interrupt copying: Cover sheet copying Sheet insertion copying Scan to e-filing/Save as file 2 1 Press the [INTERRUPT] button. - “Job interrupted job 1 saved” appears. - Interrupt copying is available while copying is in progress. When “Auto Start” is displayed, you cannot make interrupt copying. 2 Replace the original with a new one. - "2.
6. STOPPING THE COPY OPERATION If you want to stop the operation during scanning or multi-copying, the [STOP] button is used. 2 the [STOP] button on the 1 Press operational panel during the scanning or multi-copying. the menu on the right is displayed, 2 When press the [MEMORY CLEAR] button. - During scanning: the data is deleted. - During multi-copying: the data is deleted and its operation stops. If the waiting data remains, it starts to be outputted. 58 2.
7. BYPASS COPYING Bypass Copying When you want to make copies on thick paper, OHP film, tracing paper, sticker labels or other special sheet, use the sheet bypass. (Only Thick 1 paper can be set in the drawer "Setting the Drawer for Special Uses" Page 41). If the desired size of paper (standard size) is not set in the drawers, or if you want to make copies on nonstandard size paper, make bypass copies.
7.BYPASS COPYING (Cont.) - Draw the triple paper holder depending on the paper size. - Raise (B) before placing A3/LD size or larger. 2 2 Place the original(s). (B) the button that represents the size 3 Press of the paper that has been set for A3, A4, B4 and B5. When the paper size is not specified, the copying speed may be lower due to the cleaning operation inside the copier. the standard size paper other than 4 When A3, A4, B4 and B5 is set, press the [OTHER SIZE] button.
6 Press the [OTHER] button. 2 the [MEDIA TYPE] button when the 7 Press paper other than plain paper is set. Select the media type corresponding to 8 the paper that has been set, and then press the [ENTER] button. If you select the media type not corresponding to the paper that has been set, it may cause a problem such as a paper jam, significant image deterioration, etc. z Select other copy modes as required. 9 Press the [START] button.
7.BYPASS COPYING (Cont.) Bypass Copying on Non-Standard-Size Paper 2 Non-standard paper falls within the following ranges: A (Length): 100-297 mm, B (Width): 148-432 mm B A steps 1 to 2 on "Bypass Copying" 1 Follow Page 59. 2 Press the [NON STANDARD] button. in each dimension (length and width), 3 Key or recall the data stored in MEMORY, and then press the [ENTER] button. - When using the digital keys to key in the size: Key in the length and press the [SET] button.
- Press the [MEMORY 1] (or [MEMORY 2], [MEMORY 3], [MEMORY 4]) button, the paper size memorized in the MEMORY 1 appears. z Select other copy modes as required. 4 Press the [START] button. 2 Storing a Non-Standard Size in MEMORY It is convenient to store a frequently used non-standard-size paper in memory. steps 1 to 2 on "Bypass Copying" 1 Follow Page 59. 2 Press the [NON STANDARD] button.
7.BYPASS COPYING (Cont.) the desired memory number 3 Press button. 2 - When the paper size is '0 mm', the selected memory number button is vacant. - When the paper size is displayed, a non-standard size is already stored in the selected memory number. To delete the settings, follow step 4. New settings will be rewritten and stored on that memory number. in each dimension using the digital 4 Key keys, and then press the [MEMORY] button. - Key in the length and press the [SET] button.
3. SETTING OF BASIC COPY MODES 3 1. PAPER SELECTION............................................................................................................66 Automatic Paper Selection (APS) ........................................................................................66 Manual Paper Selection.......................................................................................................68 Setting the [OTHER SIZE] button ...................................................................
1. PAPER SELECTION Automatic Paper Selection (APS) When you place regular-sized originals on the glass or in the reversing automatic document feeder (optional), the size of the originals is automatically detected, which helps the copier select paper that is the same size as the originals. * Depending on the condition of the original, Automatic Paper Selection may not work correctly. In that case, select the paper size manually.
When the selected drawer size and the original size are the same, the copier rotates the original data by 90o and makes a copy which is the same size as the original --- even if those directions differ (e.g.an A4-size original is set while the same size paper is set in R direction). z Select other copy modes as required. 3 4 Press the [START] button.
1.PAPER SELECTION (Cont.) Manual Paper Selection Automatic Paper Selection cannot be used for highly transparent originals such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or irregular sized originals such as newspapers and magazines. For these types of originals, use manual paper selection.
Setting the [OTHER SIZE] button When the original or the paper size is specified and you want to use the paper size not displayed on the menu (except for non-standard size), press the [OTHER SIZE] button to select the size. This function allows the [OTHER] button to recognize the size you use. - The initial setting for this button is COMP. the [ZOOM...] button to enter the 1 Press setting menu of the original or paper size, 3 and then press the [OTHER SIZE] button.
1.PAPER SELECTION (Cont.) Mixed-sized Originals When the optional reversing automatic document feeder is used, different size originals can be copied at a time in this mode if the widths of the originals are the same. * Do not set originals whose widths are different. 3 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 - Bypass copying is not available. 2 Place the original(s). - "2.
2. BLACK-AND-WHITE/COLOUR COPY MODE SELECTION This function allows you to select the Full colour mode, the Black mode and the Auto colour mode. the [FULL COLOUR], [BLACK] or 1 Press [AUTO COLOUR] button. - [FULL COLOUR]: Regardless of colour, all originals are colourcopied. - [BLACK]: Regardless of colour, all originals are copied in blackand-white (default setting). - [AUTO COLOUR]: The type of original is automatically distinguished.
3. REDUCTION AND ENLARGEMENT COPYING When placing originals on the original glass, you can copy them at the reducing and enlarging rate of 25 to 400%. For the reversing automatic document feeder (optional), you can make copy at the reducing and enlarging rate of 25 to 200%.
3 Press the [AMS] button. - "Setting the [OTHER SIZE] button" Page 69 4 Place the original(s). - "2.SETTING ORIGINALS" Page 45 - The built-in sensors automatically detect the size of the original(s) and compute the reproduction ratio with the specified paper size respectively. - If “Change direction of original” appear, proceed as directed: 3 z Select other copy modes as required. 5 Press the [START] button. Specifying Both Original Size and Copy Size 1 Place paper in the drawer(s). - "1.
3.REDUCTION AND ENLARGEMENT COPYING (Cont.) the [ORIGINAL SIZE] button that 4 Press represents the size of the original. - Using the original size and copy size, the correct reproduction ratio is computed and displayed on the screen. - "Setting the [OTHER SIZE] button" Page 69 3 z Select other copy modes as required. 5 Press the [START] button. Using the Reduction/Enlargement Zoom Buttons or One-touch Zoom Buttons 1 Place paper in the drawer(s). - "1.
the [UP] (or [DOWN]) button to set 4 Press the desired reproduction ratio. - Each time you press either button, the reproduction ratio changes by 1%. Holding down the button changes it continuously. - You can select the reproduction ratio by pressing the [400%], [200%], [100%], [50%] or [25%] button directly. (When placing the originals on the reversing automatic document feeder (optional), you cannot select [400%] button.
4. SELECTING FINISHING MODES Finishing Modes and Finishers (Optional) The functions available differ depending on whether a finisher is installed and which type of finisher (MJ1022, MJ-1023 and MJ-1024) it is. * The touch panel used in this chapter appears when the optional saddle-stitch finisher (MJ-1024) with hole punch unit (MJ-6004) is installed in your copier.
Names of each Finisher (Optional) 1: Trays 2: Upper cover 3: Hole punch unit (MJ-6004) 4: Front cover 5: Saddle stitch tray 3 2 MJ-1024 MJ-1023 1 3 1 2 3 4 4 5 MJ-1022 1 When the finisher trays reach their maximum loading capacity ("2.SPECIFICATIONS OF OPTIONS" Page 293), “Remove paper from the finisher” appears. Remove the copied paper from the trays and the copier automatically resumes making copies.
4.SELECTING FINISHING MODES (Cont.) Sort/Group Copying To make multiple copies, you can select the sort mode or group mode as necessary. - Example of making 5 sets of copies from 5-page originals 1: Sort copying 2: Group copying 2 1 1 2 3 4 5 3 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 1 1 1 1 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.
Rotate Sort Mode In this copying mode, as sets of copies are output to the internal tray, the sets are alternated -lengthwise and crosswise- on top of each other. (Optional drawer or Stack Feeder Bypass is required.) A4/A4-R, B5/ B5-R, LT/LT-R paper is available in this mode. 3 * This mode cannot be used in the Automatic Paper Selection mode. 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.
4.SELECTING FINISHING MODES (Cont.) Staple Sorting When the finisher (optional) is installed, you can perform automatic stapling for every set. 3 staple positions can be selected when installing saddle-stitch finisher (MJ-1024) or multi-staple finisher (MJ-1023). * The paper weight should be in the range of 64-105 g/m2 for the saddle-stitch finisher (MJ-1024) or multistaple finisher (MJ-1023), and 64-80 g/m2 for the single-staple finisher (MJ-1022). Special paper such as OHP films or labels is excluded.
the [FRONT STAPLE-1] (or 4 Press [DOUBLE STAPLE], [REAR STAPLE]) button. - Only the [FRONT STAPLE-1] button is available when installing the single-staple finisher (MJ-1022). z Select other copy modes as required. 3 5 Press the [START] button. If the paper quantity exceeds the maximum number of sheets that can be stapled, the finisher automatically enters the sort mode.
4.SELECTING FINISHING MODES (Cont.) Magazine Sort & Saddle Stitch Mode (Booklet Mode) When the Magazine Sort mode is selected, 1-sided originals can be copied and bound like magazines or booklets. When the saddle-stitch finisher (optional, MJ-1024) is installed, you can select the saddle stitch mode that will automatically fold and staple the centre of the document. A3, A4-R, B4, LD, LG and LT-R are available. * Special paper such as OHP films or labels is excluded.
2 Set the paper size. - For drawer feeding "Manual Paper Selection" Page 68, step 3 - For bypass feeding "Bypass Copying on Standard Size of Paper" Page 59, step 4 3 Place the original(s). - "2.SETTING ORIGINALS" Page 45 - When placing originals in the reversing automatic document feeder (optional), set them by referring to the order of previous pages in the illustrations.
4.SELECTING FINISHING MODES (Cont.) Available Conditions for Saddle Stitch - A cover of 64-209 g/m2 can be added. In this case, the cover is included in the maximum capacity for saddle stitch. - When paper of different weights is loaded, the maximum number of sheets that can be stapled is that of the paper with the highest weight.
Hole Punch Mode (Optional) When the optional hole punch unit is attached to the finisher (Optional: MJ-1024, MJ-1023), you can hole punch your copies. * The paper weight should be in the range of 64-209 g/m2. Special paper such as OHP files or labels is excluded. 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 - When using this mode in bypass copying ("Bypass Copying" Page 59), be sure to specify the paper size. 3 2 Place the original(s). - "2.
4.SELECTING FINISHING MODES (Cont.) Number of punch holes and hole diameter 3 Japan and most of Europe 2 holes A3, A4, A4-R, B4, B5, B5-R, FOLIO, (MJ-6004E) (6.5 mm dia.) LD, LG, LT, LT-R, COMP North America 2/3 holes switchable 2 holes: A4-R, LG, LT-R (MJ-6004N) (8.0 mm dia.) 3 holes: A3, A4, LD, LT France 4 holes A3, A4, LD, LT (MJ-6004F) (6.5 mm dia.: 80 mm pitch) Sweden 4 holes A3, A4, A4-R, B4, B5, B5-R, FOLIO, (MJ-6004S) (6.5 mm dia.: 70.
5. DUPLEX COPYING For Making 1-sided, 2-sided and Book-type Copies This function allows you to set the type of originals (1-sided, 2-sided or book-type) and the desired type of copying (1-sided or 2-sided). Duplex copying is available for the plain paper (64-80 g/m2) and thick 1 paper (81-105 g/m2).
5.DUPLEX COPYING (Cont.) 1. 1-Sided Originals -> 1-Sided Copies (default setting) 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). 3 - "2.SETTING ORIGINALS" Page 45 that the [1 1 SIMPLEX] mode is 3 Confirm selected in the basic menu. - If the “1-SIDED 1-SIDED” mode is not selected, press the button (highlighted) in the menu on the right, and then press the [1 1 SIMPLEX] button on the next screen. z Select other copy modes as required.
the basic menu, press the highlighted 3 On button on the right. 3 4 Press the [1 2 DUPLEX] button. z Select other copy modes as required. 5 Press the [START] button. - When placing an original on the glass, follow step 5 to 6 on page "Copying Procedure" Page 52 continuously. 3. 2-Sided Originals -> 2-Sided Copies 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 - When using this mode in bypass copying ("Bypass Copying" Page 59), be sure to specify the paper size.
5.DUPLEX COPYING (Cont.) 4 Press the [2 2 DUPLEX] button. z Select other copy modes as required. 5 Press the [START] button. - When placing an original on the glass, follow step 5 to 6 on page "Copying Procedure" Page 52 continuously. 3 4. 2-Sided Originals -> 1-Sided Copies Starting Image Direction can be used if the orientation of the output is alternating between pages when using landscape originals. See "13.DIRECTION OF COPY IMAGES IN “1 TO 2” AND “2 TO 1”" Page 130 for details.
5. Book-type Originals -> 2-Sided Copies * Acceptable paper size for this function are A4 or B5 only. 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 - When using this mode in bypass copying ("Bypass Copying" Page 59), be sure to specify the paper size. 3 the basic menu, press the highlighted 2 On button on the right. 3 Press the [BOOK 2] button. 4 Select the book copying type.
5.DUPLEX COPYING (Cont.) 5 Select A4 or B5 copy size. you need a binding space, select the 6 Ifbook margin mode from the Image Shift function ("Creating a Bookbinding Margin" Page 107). 3 z Select other copy modes as required. the first page(s) on the glass, and 7 Place then press the [START] button. - If you do not copy your originals from the first page, the copies will not be arranged in the same order as the original. - Centre the book on the yellow indicator line with its bottom toward you.
6. ORIGINAL MODE By selecting an original mode according to the type of your originals, you can make copies with the suitable image. * Be sure to select the original mode after having selected the black-and-white or colour mode. 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" 2 Page 36 3 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the basic menu, press the highlighted 3 On button on the right.
7. COPY DENSITY ADJUSTMENT There are 2 types of image density adjustments: automatic mode and manual mode. In the automatic mode, the density of each original is detected automatically and the optimum image density is selected. In the manual mode, you can select the desired level of image density. Adjust the density with this mode depending on the original condition. * Default setting: Manual density for colour mode, Automatic density for black mode.
4. IMAGE EDITING AND IMAGE ADJUSTMENT 1. COLOUR BALANCE (YMCK ADJUSTMENT) .....................................................................96 2. RGB ADJUSTMENT ............................................................................................................97 3. ONE-TOUCH ADJUSTMENT ..............................................................................................98 4 4. BACKGROUND ADJUSTMENT .......................................................................................
1. COLOUR BALANCE (YMCK ADJUSTMENT) This function allows you to adjust the colour balance by changing the toner amount of Yellow (Y), Magenta (M), Cyan (C) and Black (K). * It is available only for the full colour mode. 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). 4 - "2.SETTING ORIGINALS" Page 45 the [IMAGE] button to enter the 3 Press image menu, and then press the [COLOUR BALANCE] button. the or 4 Press colour balance.
2. RGB ADJUSTMENT This function allows you to adjust the colour balance by changing the strength of Red (R), Green (G) and Blue (B) at the time of scanning original. It is available only in the full colour mode. 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.SETTING ORIGINALS" 3 Page 45 4 Press the [IMAGE] button to enter the image menu, and then press the [RGB ADJUSTMENT] button. the or 4 Press colour balance.
3. ONE-TOUCH ADJUSTMENT You can make the image quality “warm”, “cool”, “vivid” or “clear” with just one touch. It is available only in the full colour mode. 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.SETTING ORIGINALS" 4 Page 45 the [IMAGE] button to enter the 3 Press image menu, and then press the [ONE TOUCH ADJUSTMENT] button. the [COOL] ([WARM], [VIVID], or 4 Press [CLEAR]) button. z Select other copy modes as required.
4. BACKGROUND ADJUSTMENT This function allows you to adjust the density of the original’s background or to avoid copying the back side of originals. * It is available only in the full colour mode. * Background Adjustment and Automatic Copy Density mode cannot be used together. 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 4 the [IMAGE] button to enter the 3 Press image menu, and then press the [BACKGROUND ADJUSTMENT] button.
5. SHARPNESS ADJUSTMENT This function allows you to emphasize the letters and edges of images. This function is available in the black-and-white mode as well. 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.SETTING ORIGINALS" 4 Page 45 the [IMAGE] button to enter the 3 Press image menu, and then press the [SHARPNESS] button. 4 Press the [SOFT] (or [SHARP]) button.
6. TWIN (2-COLOUR) COPYING You can make a copy with 2 colours from a coloured original.There are 2 ways of doing this: - Making 2-colour copies with 2 manually-selected colours: The coloured original can be copied in selected colour for the black part and in another selected colour for the other part. - Making 2-colour copies using red and black: The coloured original can be copied in red for the red part and in black for the other part.
6.TWIN (2-COLOUR) COPYING (Cont.) a colour for the black areas on the 5 Select original. - After pressing the [CHANGE BLACK TO] button, select the desired colour. 4 a colour for the parts other than 6 Select black on the original. - After pressing the [SECOND COLOUR] button, select the desired colour. selecting [CHANGE BLACK TO] and 7 After [SECOND COLOUR], press the [ENTER] button. z Select other copy mode as required. 8 Press the [START] button. 102 4.
Twin (2-Colour) Copying with Red and Black 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the [IMAGE] button to enter the 3 Press image menu, and then press the [TWIN COLOUR COPY] button. 4 4 Press the [RED & BLACK] button. 5 Press the [ENTER] button. z Select other copy modes as required. 6 Press the [START] button.
4 104 4.
5. USING THE EDITING FUNCTIONS 1. IMAGE SHIFT ....................................................................................................................106 2. EDGE ERASE....................................................................................................................109 3. BOOK CENTRE ERASE.................................................................................................... 110 4. DUAL-PAGE............................................................................
1. IMAGE SHIFT A margin for binding is created by shifting the original image to either the right or left side. You can also create binding margins in the centre (inner margin) when using Book-Type Originals to 2-sided copies (see "5. Book-type Originals -> 2-Sided Copies" Page 91). 5 Creating a Right or Left Margin 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 - When using this mode in bypass copying ("Bypass Copying" Page 59), be sure to specify the paper size.
the width of binding margin, and 5 Adjust then press the [ENTER] button. - The default width of the margin is 7 mm. - To adjust the width, press the [0mm] or [30mm] button to select the desired number, and then press the [ENTER] button. - In duplex copying, margins on the back are created on the other side of those in the front. "5.DUPLEX COPYING" Page 87 z Select other copy modes as required. 6 Press the [START] button.
1.IMAGE SHIFT (Cont.) the width of the margin, and then 3 Adjust press the [ENTER] button. - The default width of the margin is 7 mm (Book binding margin is 14 mm.). - To adjust the width, press the [2 mm] or [30 mm] button to select the desired number, and then press the [ENTER] button. 5 108 5.
2. EDGE ERASE If your original has a dirty or torn edge, it may be reproduced as a black stain on the copy. In that case, use Edge Erase Copying. A white border is created along the edges of the copy, eliminating those black stains. * This function is available in only case of the standard-size original. 5 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 - When using this mode in bypass copying ("Bypass Copying" Page 59), be sure to specify the paper size. 2 Place the original(s). - "2.
3. BOOK CENTRE ERASE This feature allows you to erase the shadow in the centre of a book original. 1: Before 2: After the book centre has been erased 1 5 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 - When using this mode in bypass copying ("Bypass Copying" Page 59), be sure to specify the paper size. 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the [EDIT] button to enter the edit 3 Press menu, and then press the [BOOK CENTRE ERASE] button.
4. DUAL-PAGE Utilizing this feature allows the facing pages of a book or magazine to be copied page by page onto 2 separate sheets of paper or duplex-copied on one sheet. There is no need to move the original on the glass. You can also place a pair of A4 (or B5, LT) sized originals side by side and copy them on separate sheets of paper. * Acceptable paper sizes for this function are A4, B5 and LT only. -12- -13- -12- -13- 5 1 Place paper in the drawer(s). - "1.
4.DUAL-PAGE (Cont.) the first page(s) to be copied on the 6 Place glass, and then press the [START] button. - If you do not copy your originals from the first page, the copies will not be arranged in the same order as the original. - Centre the book on the yellow indicator line with the bottom toward you. "Book-type Originals" Page 48 to the next page, set the book again, 7 Turn and then press the [START] button. - Repeat the above procedure until all the originals have been scanned.
5. 2 IN 1/4 IN 1 This feature allows multiple originals to be reduced and copied onto a single sheet of paper. There are 2 modes: 2 IN 1 copying, where 2 originals are copied onto a single sheet, and 4 IN 1 copying, where 4 originals are copied onto a single sheet. In addition, duplex 2 IN 1/4 IN 1 modes are available, where four/ eight originals can be copied to 2 sides of a single sheet of paper. * This mode cannot be used in combination with reduction/enlargement copying.
5.2 IN 1/4 IN 1 (Cont.) - 4 IN 1 DUPLEX (a: Side 1, b: Side 2) * When a copy is turned with the line as a pivot, originals are printed on Side 2 (back face) as shown. a b a b 5 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 - When using this mode in bypass copying ("Bypass Copying" Page 59), be sure to specify the paper size. To make copies onto paper which is not the same size as originals, press the [ZOOM...
4 Select the type of image combination. - Press the [2 IN 1] (or [4 IN 1], [2 IN 1 DUPLEX] or [4 IN 1 DUPLEX]) button. 5 Select the type of the original. - Press the [1 SIDE] (or [2 SIDE]) button. z Select other copy modes as required. 5 6 Press the [START] button. - When placing an original on the glass, follow the steps 5 to 6 on "Copying Procedure" Page 52 continuously.
6. MAGAZINE SORT (FROM THE EDITING MENU) The magazine sort mode allows 1-sided originals to be copied and sorted so that they can be folded and bound along a centre line like typical magazines or booklets. Example of copying a 12-page document 1 6 2 7 4 3 2 12 9 11 - If used in combination with the optional finisher (MJ-1024) equipped with saddle stitch, copies can be automatically folded in half and stapled along their centre line. (A3, A4-R, B4, LD and LT-R are available.
the [EDIT] button to enter the edit 4 Press menu, and then press the [MAGAZINE SORT] button. the binding margin, and then press 5 Adjust the [ENTER] button. 5 - The default width of the margin is 2 mm. - To adjust the width, press the [2 mm] or [30 mm] button to select the desired number, and then press the [ENTER] button. - If the optional finisher (MJ-1024) equipped with the saddle stitch is installed, copied paper can be automatically stapled along their centre line.
7. IMAGE EDITING Trimming/Masking You can select an area on an original and copy it with the area trimmed (only the inside of the area copied) or masked (only the outside of the area copied). 4 rectangular areas can be specified on an original. * Image editing is only available with standard sized originals. * If the settings of the original and copy sizes are not made appropriately, the image may not be copied completely. 1: Trimming 2: Masking 1 5 1 Place paper in the drawer(s). - "1.
an original on the glass to specify 4 Place the area. - Set the original face up with the bottom toward you, fit its top left corner against the top left corner of the glass, and align it with the original scale. the original scale on the left and the 5 Using inner (top) scale, read the position of the desired area as follows: 5 - X1 Distance from the top left to the left edge of the specified area. - X2 Distance from the top left to the right edge of the specified area.
7.IMAGE EDITING (Cont.) Mirror Image Copies are made with images completely reversed (right and left). 5 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 - When using this mode in bypass copying ("Bypass Copying" Page 59), be sure to specify the paper size. 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the [EDIT] button to enter the edit 3 Press menu, and then press the [EDITING] button. 4 Press the [MIRROR] button. z Select other copy modes as required.
8. X-Y ZOOM You can make copies with different reproduction ratios set for the X (horizontal) and Y (Vertical) directions in the range of 25 to 400% respectively. In the following cases, set the reproduction ratio in the range of 25 to 200%. - When setting the “full colour”, “auto colour”, “twin colour” or “image smoothing” mode. - When placing the original(s) on the reversing automatic document feeder (optional). 100% 200% 100% 200% 5 1 Place paper in the drawer(s). - "1.
9. COVER COPYING A top cover and /or back cover (special sheets, e.g, coloured paper) can be added to each set of copies. It is available only when the reversing automatic document feeder (optional) is in use.
the cover sheet in the drawer for 1 Place cover sheet or on the bypass tray. - When placing it in the drawer for the cover sheet, it is necessary to set the paper type (cover sheet), size and weight. Setting the drawer for special use. "Setting the Drawer for Special Uses" Page 41 - When placing it on the bypass tray, it is necessary to set the paper size and weight. "Bypass Copying on Standard Size of Paper" Page 59 paper (other than cover paper) in 2 Place the drawer(s).
9.COVER COPYING (Cont.) - Setting the drawer for cover sheet. "Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses" Page 38 - Setting the bypass tray. "Bypass Copying" Page 59 z Select other copy modes as required. 5 7 Press the [START] button. When [TOP COPIED] button or [TOP COPIED BACK BLANK] button is selected, the cover sheet can be copied only on the top face (single-side) though 1-Sided Original to 2-Sided Copy is used. 124 5.
10. SHEET INSERTION MODE Special sheets of paper (such as coloured paper) are inserted into a set of copies at the specified pages.
10.SHEET INSERTION MODE (Cont.) 5 Press [COPIED] or [BLANK] button. - To insert copied sheet at the specified page: [COPIED] - To insert blank sheet before the specified paper: [BLANK] 5 in the desired page number (no more 6 Key than 3 digits) for insertion and press the [SET] button. - On the screen, the page where the first sheet will be inserted is shown. The example on the right shows the first sheet inserted at (or before) page 10. - To specify the next and subsequent pages, repeat step 6.
11. TIME & DATE STAMP The time and date of the scanning can be added to the copies. 1: Printed at the bottom of the portrait copy 2: Printed at the top of the landscape copy 2 1 11.15. 2003 14:54 11.15. 2003 14:54 5 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the [EDIT] button to enter the edit 3 Press menu, and then press the [TIME STAMP] button.
12. PAGE NUMBERING This feature allows numbers to be added at specified positions on copies. 1: Page number printed at the bottom centre on the portrait copy. 2: Page number printed at the top right on the landscape copy. 2 1 1 2 3 1 2 3 5 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the [EDIT] button to enter the edit 3 Press menu, and then press the [PAGE NUMBER] button.
5 Key in the starting page number. - If the start page number is ''1'', just press the [ENTER] button. z Select other copy modes as required. 6 Press the [START] button.
13. DIRECTION OF COPY IMAGES IN “1 TO 2” AND “2 TO 1” When a lengthwise A3, A5 or B4 original is copied under the mode of 1-Sided Originals to 2-Sided Copies, 2-Sided Originals to 1-Sided Copies, this function allows you to adjust the direction for 'open to left' opening. * This function is not necessary for copying in the direction of 'vertical' opening. 1: Set 2: Non set 1 5 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.
5 Press the [ENTER] button. z Select other copy modes as required 6 Press the [START] button.
14. DIRECTION OF DUPLEX COPY IMAGES IN “2 TO 2” When copying under the mode of 2-Sided Originals to 2-Sided-Copies, this function allows you to rotate the backside of the original to be copied by 180. It is useful when 'open to left' (Book) originals need to be copied in 'open to top' (Tablet), and the opposite condition is available. 5 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.SETTING ORIGINALS" the [2 3 Press menu.
15. CONTINUOUS/SINGLE ORIGINAL FEEDING When using the optional reversing automatic document feeder, you can select the continuous feed mode (default setting) so that multiple (or single) originals are continuously fed in one by one, or the single feed mode where an original is automatically pulled in when you insert it and starts being copied. * When setting the different size of originals "Mixed-sized Originals" Page 70 Continuous Feed Mode 1 Place paper in the drawer(s). - "1.
15.CONTINUOUS/SINGLE ORIGINAL FEEDING (Cont.) Single-feed Mode 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 the [EDIT] button to enter the edit 2 Press menu, and then press the [ADF] button. - If the desired function buttons are not displayed, press the [NEXT] button or [Prev] button to change the menu. 5 3 Press the [SADF] button. z Select other copy modes as required. the original on the reversing 4 Place automatic document feeder (optional).
6. STORING ORIGINALS 1. STORE TO e-FILING .........................................................................................................136 2. SAVE AS FILE ...................................................................................................................139 3. ENTERING LETTERS .......................................................................................................
1. STORE TO e-FILING In this function, the copied original data can be stored in the e-Filing. During copying, you can print it at the same time, as required. After storing the original data, you can print it at any time. To store the original data, you can specify the public box or one of user boxes. The public box is a pre-set box since the installation of the equipment, and it will be used to store documents that any user may need to work with.
4 Press the [BOX/FOLDER] button. - The box list is displayed. the box in which you want to store 5 Select the data, and then press the [ENTER] button. - Select either the “Public box” or the “User box”. - See the procedure of “e-FILING” for setting a new user box. "2.SETTING UP BOX" Page 214 6 document list in the selected box is 6 The displayed. When you want to store the original(s) in an existing folder, select the folder and press the [OPEN FOLDER] button.
1.STORE TO e-FILING (Cont.) 8 Press the [ENTER] button. “PRINT THIS DOCUMENT?” 9 When appears, press the [YES] button to store and print the document. 6 - If you want to store the document without printing, press the [NO] button. 10 Press the [START] button. - Storing the original starts. ORIGINAL?” appears. If you have 11 “NEXT the other originals to be stored, press the [YES] button. If not, press the [FINISHED] button.
2. SAVE AS FILE In this SAVE AS FILE function, the copied original data can be sent and stored to the hard disc in the equipment or the specified PC. You can administrate and edit the stored data in the e-Filing in the equipment directly from the user's PC via network. * The network administrator has to make settings for storing the original data to the PCs. For details, see the [Network Administrator's Guide]. * The hard disc could be at fault.
2.SAVE AS FILE (Cont.) 5 Select the desired location. - [MFP LOCAL]: Select when the originals should be stored in the hard disc in the main equipment. The original data will be stored under the directory path shown on the screen. - [REMOTE 1], [REMOTE 2]: Select when the originals should be stored in the hard disc of user's PC via server. The administrator has to make settings to select “REMOTE 1” or “REMOTE 2” using the TopAccess. For details, see the [Network Administrator’s Guide].
3. ENTERING LETTERS The following screen is provided for entering letters. * To enter numbers, use the digital keys on the control panel. The following buttons are used to enter letters. - [CapsLock] Press this button to switch capital letters and small letters. - [B Space] Press this button to delete the letter before the cursor. - [Space] Press this button to enter a space. - [ENTER] - [Cancel] - [Next] Press these buttons to move the cursor. Press this button to fix all entered letters.
6 142 6.
7. SCANNING THE IMAGES 1. SCAN SETTING IN THE TOUCH PANEL .........................................................................144 2. SCAN TO e-FILING ...........................................................................................................147 3. SCAN TO FILE...................................................................................................................151 4. SCAN TO E-MAIL .............................................................................................
1. SCAN SETTING IN THE TOUCH PANEL If the scanning function is used, originals set on the reversing automatic document feeder (optional) or on the original glass can easily be scanned as image data. The scanned image data can be sent or stored to the destinations of “SCAN TO e-FILING”, “SCAN TO FILE” or “SCAN TO E-MAIL”. * See the [e-Filing Guide] about how to save the data to PCs. Scanning cannot be performed while a job is printing.
Scanning Procedure 1 Place the original(s). - "2.SETTING ORIGINALS" Page 45 - Originals acceptable to be set "2.SETTING ORIGINALS" Page 45 - When placing an original on the glass "When Placing an Original on the Glass" Page 47 - When placing the original on the reversing automatic document feeder (optional) "15.CONTINUOUS/SINGLE ORIGINAL FEEDING" Page 133 the [SCAN] button on the control 2 Press panel to enter the scan menu. - The basic scan menu is displayed.
1.SCAN SETTING IN THE TOUCH PANEL (Cont.) 5 Press the [SCAN!] button. continue, place document on glass. 6 “To And press the Scan!” appears. If you want to continue scanning, press the [CONTINUE] button. If you want to finish scanning, press the [JOB FINISH] button. 7 146 - When the original is set on the reversing automatic document feeder (optional) to be scanned in the Continuous Feed mode, this screen is not displayed.
2. SCAN TO e-FILING In this function, the scanned original data can be stored in the e-Filing. During scanning, you can perform the SCAN TO e-FILING or the SCAN TO E-MAIL simultaneously, as required. After storing the original data, you can print it at any time. To store the original data, you can specify the public box or one of user boxes. The public box is a pre-set box since the installation of the equipment, and it will be used to store documents that any user may need to work with.
2.SCAN TO e-FILING (Cont.) 3 Press the [SCAN TO E-FILING] button. 4 Press the [BOX/FOLDER] button. - The box list is displayed. 7 the box in which you want to store 5 Select the data and press the [ENTER] button. - Select either the “Public box” or the “User box”. - See the procedure of “e-FILING” for setting the user box. "2.SETTING UP BOX" Page 214 - Entering letters "3.ENTERING LETTERS" Page 141 document list in the selected box is 6 The displayed.
the [DOCUMENT NAME] button to 7 Press enter the name of the scanned data. - The letter entry menu (see "3.ENTERING LETTERS" Page 141) is displayed. A document name can contain up to 64 letters. - Press the [ENTER] button on the letter entry menu. the [EDIT] button to set the original 8 Press type and size, and the scanning conditions. 7 - Press the [Next] or the [Prev] button to switch the screen and make necessary settings. After having completed all the settings, press the [ENTER] button.
2.SCAN TO e-FILING (Cont.) 10 Press the [SCAN!] button. If the “SCAN TO FILE” or the “SCAN TO E-MAIL” button is pressed to make the setting before pressing the [SCAN!] button, the specified 2 jobs can be performed simultaneously. continue, place document on glass. 11 “To And press Scan!” appears. If you want to finish scanning, press the [JOB FINISH] button. 7 - If you want to continue scanning, press the [SCAN!] button.
3. SCAN TO FILE In this SCAN TO FILE function, the scanned original data can be sent and stored to the hard disc in the equipment or the specified PC. You can administrate and edit the stored data in the e-Filing in the equipment directly from the user's PC via network. * The network administrator has to make settings for storing the original data to the PCs. For details, see the [Network Administrator's Guide]. * The hard disc could be at fault.
3.SCAN TO FILE (Cont.) the [FILE NAME] button to enter the 4 Press file name of the scanned data. - The letter entry menu is displayed. A file name can contain up to 64 letters. - After entering the letters, be sure to press the [ENTER] button. 5 Select the desired location. - [MFP LOCAL]: Select when the originals should be stored in the hard disc in the main equipment. The original data will be stored under the directory path shown on the screen.
- Press the [Next] or [Prev] button to switch the screen and make necessary settings. 8 Press the [ENTER] button. 7 9 Press the [SCAN!] button. If the [SCAN TO E-FILING] or the [SCAN TO E-MAIL] button is pressed to make the setting before pressing the [SCAN!] button, the specified 2 jobs can be performed simultaneously. continue, place document on glass. 10 “To And press Scan!” appears. If you want to finish scanning, press the [JOB FINISH] button.
3.SCAN TO FILE (Cont.) - You can change the original size, type and scanning conditions by pressing the [EDIT] button for the next scanning. - If you want to cancel the storage of the scanned data, press the [JOB CANCEL] button. 7 154 7.
4. SCAN TO E-MAIL In this function, the scanned data can be sent to the specified E-mail address as an attached file. After finishing the setting for the E-mail transmission, the settings for SCAN TO E-FILING or SCAN TO FILE can be made and the data can be scanned simultaneously. * To use SCAN TO E-MAIL, the configuration of the equipment needs to be set by the network administrator. 1 Place the original(s). - "2.
4.SCAN TO E-MAIL (Cont.) the [E-MAIL TO] button and select 4 Press the address. - Press the [E-MAIL ADDRESS] button when you want to enter the address directly with the soft keyboard. - When the address book appears, select the address which you want to send to. - See the [User Function Guide] for entering and setting the address. - To return the SCAN TO E-MAIL menu from the address book, press the [RETURN] button. the [SUBJECT] button and enter the 5 Press subject of the E-mail.
8 Select the file format. the [EDIT] button and set the 9 Press original size and type. - After step 9 is finished, press the [NEXT] button.
4.SCAN TO E-MAIL (Cont.) 10 Set the size of the attached data. - Image data are divided into some small blocks to be sent. FRAGMENT MESSAGE SIZE (KB): NONE, 64 KB, 128 KB, 256 KB, 512 KB, 1024 KB, 2048 KB Press the [Next] or [Prev] button to switch the screen and make necessary settings. The volume of the high-resolution image data may be very large. When sending E-mail, be careful not to exceed the mail server capacity of both the transmitter and the receiver.
all the settings are entered, press 13 After the [ENTER] button. 14 Press the [SCAN!] button. - If the [SCAN TO E-FILING] or the [SCAN TO E-MAIL] button is pressed to make the setting before pressing the [SCAN!] button, the specified 2 jobs can be performed simultaneously.
7 160 7.
8. INTERNET FAX 1. INTERNET FAX .................................................................................................................162 2. SENDING INTERNET FAX................................................................................................164 Setting the Transmission Conditions..................................................................................164 Specifying the Recipients ............................................................................................
1. INTERNET FAX Internet Fax function provides the ability to transmit a scanned original as an E-mail, with an attached TIFFS file. Since an Internet line is used instead of a phone line, the communication cost can be reduced. In this function, an E-mail address is specified in place of a phone number to transmit a scanned original to the Internet Fax equipment or the client computers. When the Internet Fax is received, it is automatically output like regular Fax.
- Internet Fax to Internet Fax The equipment can send a document to another Internet Fax equipment through the Internet or Intranet. The document is sent as an E-mail. e-STUDIO3511/4511 e-STUDIO3511/4511 - Internet Fax to/from Client Computers The equipment can send a document as an E-mail to client computers through the Internet or Intranet. The client computers can send an E-mail to the equipment as well.
2. SENDING INTERNET FAX Setting the Transmission Conditions Set the resolution, the image quality mode, exposure, original size, subject and body of originals. Whenever a transmission is completed, the condition will automatically return to the default setting. The following describes the setting of each item. - Resolution: Set the resolution before you scan the original to be sent. STANDARD, FINE, U-FINE * For the Internet Fax, the original is sent in FINE though U-FINE is selected.
the [ADDRESS] button to display 2 Press the address menu, and then press the [OPTION] button.
2.SENDING INTERNET FAX (Cont.) selecting each transmission 3 After condition, press the [ENTER] button. - Press the [Prev] or [Next] button to switch the menu. - The buttons shaded in the menu on the right are the default settings. 8 166 8.
Specifying the Recipients - Direct entry: You can enter the E-mail address directly with the letter entry menu to send the original. Address book entry: You can specify the other party that has been registered into the address book. Group entry: Originals are sent to the recipients that have been already specified as a group at a time. Multi-address transmission: The same original can be sent to 2 or more recipients in a single operation. Direct Entry the [FAX] button on the control 1 Press panel.
2.SENDING INTERNET FAX (Cont.) Address Book Entry - It is necessary to previously register the address book. See the [User Function Guide] for registering the address book. the [FAX] button on the control 1 Press panel. 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the [OPTION] button and set the 3 Press transmission conditions. - "Setting the Transmission Conditions" Page 164 4 Set the advanced function as required.
Group Entry - It is necessary to previously enter the recipients into the group. See the [User Function Guide] for creating groups. the [FAX] button on the control 1 Press panel. 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the [OPTION] button and set the 3 Press transmission conditions. - "Setting the Transmission Conditions" Page 164 4 Set the advanced function as required.
2.SENDING INTERNET FAX (Cont.) the recipient group you want to 6 Press send to. To check the specified group member, press the [CONTENTS] button. - You can search for the recipient by ID number or group. - Searching by ID Number "Searching by ID Number" Page 171 Searching by Group "Searching by Address" Page 173 7 Press the [START] button. 8 170 8.
Searching by ID Number When selecting the recipient entered in the address and the group, you can immediately search them by the ID number on the screen. the [FAX] button on the control 1 Press panel. 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the [OPTION] button and set the 3 Press transmission conditions. - "Setting the Transmission Conditions" Page 164 4 Set the advanced function as required.
2.SENDING INTERNET FAX (Cont.) 7 Press the [E-MAIL] button of destination. - 1 screen can show 8 destinations. To view the destinations not displayed on the screen, press the [Prev] or [Next] button to scroll through the screens. - To continue searching by the ID number, press the [KNOWN ID] button. - To continue searching by the address ("Searching by Address" Page 173), press the [SEARCH ADDRESS] button. 8 Press the [START] button. 8 172 8.
Searching by Address When selecting the recipient entered in the address and group, pressing a letter button displays the recipient whose names start with the letter on the screen, which makes it easy to choose the desired recipient. the [FAX] button on the control 1 Press panel. 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the [OPTION] button and set the 3 Press transmission conditions. - "Setting the Transmission Conditions" Page 164 4 Set the advanced function as required.
2.SENDING INTERNET FAX (Cont.) the button of item that you want to 6 Press search. the letter or the number, and then 7 Enter press the [ENTER] button. - Entering Letters "3.ENTERING LETTERS" 8 Page 141 8 Press the [SEARCH] button. the [E-MAIL] button of destination, 9 Press and then press the [ENTER] button. - 1 screen can show 8 destinations. To view the destinations not displayed on the screen, press the [Prev] or [Next] button to scroll through the screens.
Multi-address Transmission The multi-address transmission function allows you to send the same original to 2 or more recipients in a single operation, which can be done by combining direct, address book and group entry.
2.SENDING INTERNET FAX (Cont.) Confirming the Destinations After specifying of the multiple destinations by such as Multi-address Transmitting, you can confirm these addresses in the list by pressing the [DESTINATION] button. Also, you can delete the addresses by pressing the [DELETE] button. 1 Press the [DESTINATION] button. - 1 screen can show 8 destinations. - To view destinations which are not displayed on the screen, press the [Prev] or [Next] button to scroll through the screens.
Advanced Function The following advanced function can be used. - 2-sided original TX: 2-sided originals can be sent using the reversing automatic document feeder. - Priority TX: You can send originals prior to the reserved transmissions. Sending 2-sided Originals You can scan and send 2-sided originals using the reversing automatic document feeder (optional). Whenever a transmission is completed, the condition will automatically return to the default setting.
2.SENDING INTERNET FAX (Cont.) the [ADVANCED] button to display 4 Press the advanced menu, and then press the [2-SIDED SCAN] button. the original type either the [BOOK] 5 Select or [TABLET] button, and then press the [ENTER] button. 6 Specify the recipient. - "Specifying the Recipients" Page 167 7 Press the [START] button. 8 Priority Transmission Priority TX allows you to execute a transmission prior to the other reserved transmissions.
the [ADVANCED] button to display 4 Press the advanced menu, and then press the [PRIORITY RESERVE] button. 5 Press the [ENTER] button. 6 Specify the recipient. - "Specifying the Recipients" Page 167 7 Press the [START] button.
3. RECEIVING INTERNET FAX Receiving Modes The methods to receive an Internet Fax vary according to the type of protocols used for receiving an E-mail. When POP3* is selected for the Receive Mode: - The equipment accesses the E-mail server at specified intervals to check whether any E-mail has been delivered. If an E-mail has been delivered, the equipment will automatically retrieve and print out the Email.
the [USER FUNCTIONS] button on 1 Press the control panel. the [USER] button, and then press 2 Press the [CHECK E-MAIL]. - Checking whether any E-mail has been delivered starts. 3 Checking completes. - If the Internet Fax is received, “RECEIVING E-mail” appears on the screen upper right. Next, “NEW E-mail RECEIVED” appears for 2 seconds. Then, printing the Internet Fax starts. - If no Internet Fax is received, “CURRENTLY NO E-mail” appears on the screen upper right for 2 seconds.
8 182 8.
9. JOB STATUS 1. JOB STATUS .....................................................................................................................184 2. PRINT JOB LIST................................................................................................................185 3. PROOF PRINT JOB ..........................................................................................................188 4. PRIVATE PRINT JOB ...............................................................................
1. JOB STATUS [JOB STATUS] enables: - To show the list of printing, Internet Fax and scanning jobs in the waiting status - To show the status of the print, transmission, reception, scanning log and print - To perform the execution, pause, deletion and movement of the waiting jobs. 4 jobs are listed on each screen (page). The jobs for 250 pages (1,000 jobs) are available to display. Press the [Next] button to display the 5th job or later, and press the [Prev] button to display the previous page.
2. PRINT JOB LIST Print Job enables to display the status of print jobs transmitted between the equipment and network controller, and perform the deletion, pause, movement and print of the jobs. Press the [Next] button to display the 5th job or later, and press the [Prev] button to display the previous page. Deleting a Job the [JOB STATUS] button on the 1 Press control panel to display the JOB STATUS screen. - Displayed screen is the print job list screen. the job on the list you want to 2 Press delete.
2.PRINT JOB LIST (Cont.) OK?” appears. Press the 4 “Delete [DELETE] button to delete the job. Pausing and Resuming a Print Job the user name on the list you want 1 Press to interrupt. 2 Press the [PAUSE] button. resume the job, press the [RELEASE] 3 To button. 9 186 9.
Moving a Print Job the user name on the list you want 1 Press to move. 2 Press the [MOVE] button. 3 Specify the position of the order. 9 - (Ex.) Press the 1st user name to move the target job to the 2nd.
3. PROOF PRINT JOB This function performs the proof print when the [PROOF] button is previously specified with the application. The print job specified for proof print is listed. 1 set is printed as a proof print before the specified number of sets are printed. After it completes, remaining print job is performed as the normal print job. In addition, before performing as the normal print job, changing the number of sets and deleting a job are available. * For the Proof print, see the [Print Guide].
Deleting a Job 1 Press the [PROOF] button. print job list is displayed. Press the 2 Proof user name on the list which you want to delete. 3 Press the [DELETE] button. OK?” appears. Press the 4 “Delete [DELETE] button to delete the job.
4. PRIVATE PRINT JOB Private print enables to print the desired documents by entering the password which has been set on the application. * For the Private print, see the [Print Guide]. Private Print the [PRIVATE] button to display the 1 Press private print job list. the user name on the list you want 2 Press to start with. - If the relevant job is not displayed, press the [Next] or [Prev] button to switch the screen. 3 Press the [RELEASE] button. 4 Key in the password. 5 Press the [ENTER] button.
Deleting a Private Print the [PRIVATE] button to display the 1 Press private print job list. the user name on the list you want 2 Press to delete. 3 Press the [DELETE] button. 4 Key in the password. 9 OK?” appears. Press the 5 “Delete [DELETE] button to delete the job.
5. WHEN USING THE DEPARTMENT CODES Jobs sent to the equipment without a Department Code or not a registered Department Code will appear in the Invalid Queue of Job status. To Restore the Invalid Code (print error) to the Normal Print the [INVALID] button to display the 1 Press list. the user name on the list you want 2 Press to print. 3 Press the [RELEASE] button. 9 department code entry screen is 4 The displayed. Key in the correct department code. 5 Press the [ENTER] button. 192 9.
Deleting a Job from the List the [INVALID] button to display the 1 Press list. the user name on the list you want 2 Press to delete. 3 Press the [DELETE] button. OK?” appears. Press the 4 “Delete [DELETE] button to delete the job.
6. CONFIRMING THE STATUS OF FAX/INTERNET FAX JOB Fax (optional)/Internet Fax JOB displays its status and enables to delete and send the job. 4 jobs are listed on each screen (page). The jobs for 250 pages (1,000 jobs) are available to display. Press the [Next] button to display the 5th job or later, and press the [Prev] button to display the previous page. * For the Fax function, see the [Network Fax Guide]. 9 - Items of list File No.
7. CONFIRMING THE STATUS OF SCAN SCAN JOB displays its status and enables to delete the job. 4 jobs are listed on each screen. The jobs for 250 pages (1,000 jobs) are available to display. Press the [Next] button to display the 5th job or later, and press the [Prev] button to display the previous page. * For the SCAN function, see the [SCANNING THE IMAGES]. "1.
8. LOG LIST LOG LOG allows you to list the jobs that have finished being printed, sent/received Fax and scanned to confirm the results. You can also register the Fax number and E-mail address from the send/receive Fax and scan (*1) log to the address book. *1 E-mail address used in the E-mail transmission Print Log When pressing the [PRINT] button on the log menu, the printing status is displayed.
Send/Receive Log When pressing the [SEND] or [RECEIVE] button on the log menu, the sending/receiving status of Fax or Internet Fax is displayed. - Items of list File No.
8.LOG LIST (Cont.) Scan Log When pressing the [SCAN] button on the log menu, the scanning status is displayed. - Items of list To: The storing location of the scanned data or E-mail address of the recipient Agent: Scanned job in the scan menu Date, Time: Date and time at the time of scanning Pages: Number of pages scanned or sent E-mail Status: Status of job displayed with ‘OK’ or ‘Error code’ "12.
9. ADDRESS REGISTRATION FROM LOG LISTS You can register the recipient (or sender) in the address book from the SEND /RECEIVE LOG list or the SCAN LOG list by selecting the recipient (or sender) and pressing the [ENTRY] button. * For the address book, see the [User Function Guide]. the [LOG] button and then press the 1 Press [SEND] (or [RECEIVE]) button. LOG list (or RECEIVE LOG list) is 2 SEND displayed. 9 the recipient (or sender) you want 3 Select to register in the address book.
9.ADDRESS REGISTRATION FROM LOG LISTS (Cont.) 4 Press the [ENTRY] button. ENTRY screen is displayed. 5 ADDRESS Press the [NAME] button to enter the recipient's name. - Entering letters "3.ENTERING LETTERS" 6 Press the [ENTER] button. 9 200 9.
10. PRINTING SEND/RECEIVE LOG LIST OF FAX Up to 120 logs (3 pages) and 1 selected SEND (or RECEIVE) LOG are available to print in the SEND/ RECEIVE LOG list of Fax. * Either 40 logs (1 page) or 120 logs (3 pages) can be set to print the log list. See the [User Function Guide] for details. the [LOG] button, and then press 1 Press the [SEND] (or [RECEIVE]) button. the [JOURNAL] button to print the 2 Press SEND/RECEIVE LOG.
11. STATUS STATUS displays the drawer's size of the equipment and highlights the active drawer during printing. When pressing the [STATUS] during stopping of the print job due to an error, the drawer's size and the active drawer can be changed in case of paper shortage and no applicable drawer. Releasing the Print Error When the drawer for the specified size paper is not prepared, the print job error occurs and the [JOB STATUS] button blinks. To release the error, follow the procedure below.
the paper size button you set by 4 Press pressing the paper size button on the screen. 5 Press the [START] button.
12. ERROR CODE If an error occurs while using the Fax (including the Internet Fax) or scan, the error code is displayed in the status of each log. Take an appropriate action with reference to the following. Fax/Internet Fax Error Code Cause Corrective Action Fax 0011 Paper jam Clear the jammed printing paper. 0012 Original jam Clear the jammed original. 0013 Door open Firmly close the open door. 0020 Power interruption Check the power interruption report.
Error Code Cause Corrective Action 1C15 Exceeding file capacity Ask your administrator to change the “Fragment Page Size” setting for the Internet Fax setting, or reduce the number of pages and perform the job again. 1C20 System management module access abnormality Turn the power OFF and then back ON. Perform the job in error again. If the recovery is still not completed, contact your authorized dealer for support. Job control module access abnormality Turn the power OFF and then back ON.
12.ERROR CODE (Cont.) Error Code Cause 1C62 Memory acquiring failure Turn the power OFF and then back ON. Perform the job in error again. If the error still occurs, contact your authorized dealer for support. 1C63 Terminal IP address unset Ask your administrator to set the IP address of the equipment. 1C64 Terminal mail address unset Ask your administrator to set the E-mail address of the equipment. 1C65 SMTP address unset Ask your administrator to set the SMTP server address.
Error Code Cause Corrective Action 1C70 SMTP client OFF Ask your administrator to enable the SMTP Client and perform the job again. 1C80 Internet Fax transmission failure when processing E-mail job received Confirm the “Received Internet Fax Forward” settings. 1C81 Onramp Gateway transmission failure Confirm the mail box settings. 1C82 Internet Fax transmission failure when processing Fax job received Confirm the “Received Fax Forward” setting.
12.ERROR CODE (Cont.) Error Code 2C67, 2C68 2C6A Message Corrective Action Failed to send E-Mail message Retry the scan. NIC time out error occurs during the transmission. 2C6B Invalid address specified in From: field Make sure you specify correct E-mail address for this equipment and retry the scan. 2C6C Invalid address specified in To: field Make sure you are sending to correct E-mail addresses and retry the scan. 2C6D NIC system error Contact your dealer for support.
Error Code Message Corrective Action 2D63 Specified network path is invalid. Check destination path. Make sure you specify correct network folder and retry the scan. 2D64 Logon to file server failed. Check username and password. Make sure you specify correct user name and password to logon the file server and retry the scan. 2D66 Failed to process your job. Insufficient disc space. Delete the data in the local shared folder in the equipment and retry the scan. 2D67 FTP service is not available.
12.ERROR CODE (Cont.) Error Code Message 2BB0 Job canceled Job was canceled. 2BB1 Power failure occurred Power failure occurred during the process. 2BC0 System fatal error. The system error occurs during the process. Retry the scan. 2BC1 Failed to acquire resource. Retry the scan. The system could not store the scan job. 9 210 Corrective Action 9.
10. e-FILING 1. e-FILING FUNCTIONS ......................................................................................................212 2. SETTING UP BOX.............................................................................................................214 3. CHANGING INPUT DATA..................................................................................................216 4. DELETING BOX ....................................................................................................
1. e-FILING FUNCTIONS In this e-Filing functions, the documents obtained by copying, scanning, printing, Fax receiving (when an option is installed), Internet Fax and E-mail reception can be managed in the e-Filing (hard disc) inside the equipment. Before you use the e-Filing, you need to set up it. The e-Filing consists of one public box and user boxes up to 200. You can store a number of documents in each box, and then print the stored documents later as required.
With the equipment, documents can be stored in the e-Filing as the original data by copying or scanning. ("1.STORE TO e-FILING" Page 136, "2.SCAN TO e-FILING" Page 147) The documents stored in the e-Filing can be printed by specifying some pages or “All Pages” after adding/changing printing settings as required. Also, unnecessary documents can be deleted from the specified user box.
2. SETTING UP BOX The e-Filing consists of one public box and user boxes up to 200. The public box is a pre-set box since the installation of the equipment, and no setting up is required. The user box can be set/registered by giving a box name. If the password is set, the box is protected and important documents can be stored safely. Up to 200 user boxes can be set/registered.
4 Press the [ENTER] button. - A box is newly set.
3. CHANGING INPUT DATA The “registered box name” and “password” of the user box can be changed. * You cannot change the folder name with the equipment. Change it with a client PC using the e-Filing web utility via network, if required. See the [e-Filing Guide] for details. the [e-FILING] button on the control 1 Press panel. the box you want to change, and 2 Select then press the [EDIT] button. - Switch to the applicable menu using the [Prev] or the [Next] button.
5 Press the [ENTER] button. - The box settings are updated.
4. DELETING BOX The unnecessary user box can be deleted. In this case, all the documents in a user box are also deleted. * The public box cannot be deleted. * You cannot delete the folder in a user box with the equipment. Delete it with a client PC using the e-Filing web utility via network, if required. See the [e-Filing Guide] for details. the [e-FILING] button on the control 1 Press panel. the box you want to delete, and 2 Select then press the [DELETE] button.
5. PRINTING STORED DOCUMENT Documents stored in the box or the folder can be printed. State of finishing can be selected. And to confirm the printing content, test printing can also be performed. Print the whole Document. All the pages of the document will be printed. If printing multiple copies is desired, see "Printing the Stored Document with Added/Changed Settings" Page 221. the [e-FILING] button on the control 1 Press panel.
5.PRINTING STORED DOCUMENT (Cont.) 5 Press the [PRINT] button. - Printing of the whole document starts. Execute Test Printing A part can be printed from a document that consists of several pages. steps 1 to 4 of the “Print the 1 Perform whole Document”. 2 Press the [TEST PRINT] button. 10 in the number of the last page to 3 Key specify the printing page. - When printing all pages are desired, press the [ALL PAGES] button. 220 10.
4 Press the [PRINT] button. - Printing the set page starts. Printing the Stored Document with Added/Changed Settings The following settings can be added (or changed) to the stored document in the filing box. 1: Setting the feeding source (Press the cassette area of the feeding source) 2: Setting the number of printing (Key in by the digital key) 3: Setting single-side printing/duplex printing.
5.PRINTING STORED DOCUMENT (Cont.) 2 Press the [SETTINGS] button. 3 Set printing as required. - See the previous page for details. As for the settings of 3 to 8, press the button, select the desired button in the menu and press the [ENTER] button. 4 Press the [PRINT] button. - Printing starts. 10 222 10.
11. TEMPLATE 1. TEMPLATE ........................................................................................................................224 2. RECALLING TEMPLATE ...................................................................................................225 3. REGISTERING TEMPLATE...............................................................................................228 4. CHANGING INPUT DATA.............................................................................................
1. TEMPLATE A combination of functions frequently used can be registered as a template and recalled as required * You can register the setting combination of copy functions, scan functions or facsimile functions (optional) as a template and retrieve it. The combinations are registered in either “PUBLIC TEMPLATE GROUP” or “USER GROUP (Up to 200 groups are available.)” in the menu of template. Up to 60 combinations can be registered in 1 group. 1 : Register the combination of the functions.
2. RECALLING TEMPLATE All you have to do is to press the [START] button (the [SCAN] button on the touch panel for scanning) after recalling the required template. When Recalling Template in the Public Group 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the [TEMPLATE] button on the 3 Press control panel. - Menu for recalling template is displayed. the [PUBLIC TEMPLATE GROUP] 4 Select button, and then press the [ENTER] button.
2.RECALLING TEMPLATE (Cont.) that “Updated the template 6 Confirm setting” is displayed on the screen. z Select other copy mode as required. 7 Press the [START] button. When Recalling Template in the User Group 1 Place paper in the drawer(s). - "1.SETTING COPY PAPER" Page 36 2 Place the original(s). - "2.SETTING ORIGINALS" Page 45 the [TEMPLATE] button on the 3 Press control panel. - Menu for recalling template is displayed.
6 Select the desired template. in the Password (5 digits) of the 7 Key selected template, and then press the [ENTER] button. - If the password has not been set at the group registration, skip this procedure and go to step 8. that “Updated the template 8 Confirm setting” is displayed on the screen. z Select other copy mode as required. 9 Press the [START] button.
3. REGISTERING TEMPLATE To recall the template, you need to first register the setting combination as a template. The template is registered either in “PUBLIC TEMPLATE GROUP” or “USER GROUP” depending on your purpose. - PUBLIC TEMPLATE GROUP: Anyone can use the template when the setting combination of the functions frequently used throughout the company or organization have been registered in this group. Up to 60 combinations (templates) are available in this group.
in the “Admin Password” (6 digits), 5 Key and then press the [ENTER] button. the blank key in the template menu, 6 Press and then press the [SAVE] button. 7 Enter the data for registering template. - Although either the “NAME 1” or the “NAME 2” must be entered, the “USER NAME” and the “PASSWORD” are entered as required. - When pressing the [NAME 1] button, the menu of entering letters ("3.ENTERING LETTERS" Page 141) is displayed, so enter the name with up to 11 letters.
3.REGISTERING TEMPLATE (Cont.) 9 Press the [SAVE] button. - The menu returns to step 1. (the menu before pressing the [TEMPLATE] button on the control panel.) Registering the Template in the User Group 1 Set every function you want to combine. - Ex: Setting “Image shift”, “90% Reduction” and “10 sets of copies” of the copy function. the [TEMPLATE] button on the 2 Press control panel. 3 Press the [REGISTRATION] button.
- When selecting the registered “USER GROUP”, key in “GROUP PASSWORD” (5 digits) on the next menu, and then skip to step 8. the data for registering the new user 5 Enter group. - Although the “NAME” must be entered, the “USER NAME” and the “PASSWORD” are entered as required. - When pressing the [NAME] button, the menu of entering letters ("3.ENTERING LETTERS" Page 141) is displayed, so enter the name with up to 20 letters. - Enter the name with up to 30 letters for the [USER NAME] as the above manner.
3.REGISTERING TEMPLATE (Cont.) the empty [TEMPLATE] button, and 8 Press then press the [SAVE] button. 9 Enter the data requested. - Although either the “NAME 1” or the “NAME 2” must be entered, the “USER NAME” and the “PASSWORD” are entered as required. - When pressing the [NAME 1] button, the menu of entering letters ("3.ENTERING LETTERS" Page 141) is displayed, so enter the name with up to 11 letters.
4. CHANGING INPUT DATA The registered name, user name, password of template/user group can be changed. Changing the Data of Template the [TEMPLATE] button on the 1 Press control panel. 2 Press the [REGISTRATION] button the group (in which the template 3 Select was registered) that you want to change, and then press the [ENTER] button. - Switch to the applicable menu using the [Prev] or the [Next] button. - To display the applicable menu immediately, key in the number of desired user group.
4.CHANGING INPUT DATA (Cont.) the template you want to change, 5 Select and then press the [EDIT] button. in the “Password” (5 digits) for the 6 Key selected template, and then press the [ENTER] button. - If the password has not been set at the template registration, skip to step 7. the button of “NAME 1”, “NAME 2” 7 Press and/or “USER NAME”. - When pressing the [NAME 1] button, the menu of entering letters ("3.ENTERING LETTERS" Page 141) is displayed, so enter the name with up to 11 letters.
9 Press the [ENTER] button. - The data of template are changed. Changing the Data of User Group Those of public group cannot be changed. the [TEMPLATE] button on the 1 Press control panel. 2 Press the [REGISTRATION] button. the “USER GROUP” you want to 3 Select change, and then press the [EDIT] button. 11 - Switch to the applicable menu using the [Prev] or the [Next] button. - To display the applicable menu immediately, key in the number of the desired user group using the digital keys.
4.CHANGING INPUT DATA (Cont.) in the “Password” (5 digits) for 4 Key selected group, and then press the [ENTER] button. - If the password has not been set at the group registration, skip to step 5. the [NAME] button and/or the 5 Press [USER NAME] button. - When pressing the NAME button, the menu of entering letters ("3.ENTERING LETTERS" Page 141) is displayed, so enter the name with up to 20 letters. - Enter the name with up to 30 letters for the “USER NAME” as the above manner.
5. DELETING TEMPLATE Unnecessary templates can be deleted. You can also delete user groups. Deleting a Template the [TEMPLATE] button on the 1 Press control panel. 2 Press the [REGISTRATION] button. the group (in which the template 3 Select was registered) that you want to delete, then press the [ENTER] button. - Switch to the applicable menu using the [Prev] or the [Next] button. - To display the applicable menu immediately, key in the number of desired user group.
5.DELETING TEMPLATE (Cont.) the template you want to delete, 5 Select then press the [DELETE] button. in the “Password” (5 digits) for the 6 Key selected template, and then press the [ENTER] button. - If the password has not been set at the user group registration, skip to step 7. 7 Press the [DELETE] button. - The selected template is deleted. 11 238 11.
Deleting a User Group the [TEMPLATE] button on the 1 Press control panel. 2 Press the [REGISTRATION] button. the user group you want to delete, 3 Select and then press the [DELETE] button. - Switch to the applicable menu using the [Prev] or the [Next] button. - To display the applicable menu immediately, key in the number of desired user group. in the “Password” (5 digits) for the 4 Key selected group, and then press the [ENTER] button.
5.DELETING TEMPLATE (Cont.) 5 Press the [DELETE] button. - The selected user group is deleted. 11 240 11.
12. WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL 1. DESCRIPTION OF THE BLINKING GRAPHIC SYMBOLS...............................................242 2. ADD PAPER SYMBOL.......................................................................................................244 Adding Paper to the Drawers.............................................................................................244 Adding Paper to the Large Capacity Feeder (Optional) .....................................................
1. DESCRIPTION OF THE BLINKING GRAPHIC SYMBOLS The graphic symbol on the touch panel shows the status of the equipment. When one of the graphic symbols blinks, take the appropriate action referring to the page shown. 1 2 3 13 4 12 5 11 6 7 10 9 8 1 : CHECK ORIGINALS symbol Blinks when an original misfeed occurs inside the reversing automatic document feeder. "1.
9 : REPLACE TONER CARTRIDGE symbol Blinks when the toner cartridge runs out of toner. "3.REPLACE TONER CARTRIDGE SYMBOL" Page 246 10: REPLACE TONER BAG symbol Blinks when the toner bag becomes full of used toner. "4.REPLACE TONER BAG SYMBOL" Page 253 11: SADDLE STITCHING UNIT MISFEED symbol Blinks when a paper misfeed occurs inside the saddle stitch unit of the finisher (optional). "12.
2. ADD PAPER SYMBOL Adding Paper to the Drawers When the paper in the selected drawer or the large capacity feeder (optional) runs out, the drawer or large capacity feeder on the screen blinks, and “Add paper” appears. Add paper as the following procedure. out the drawer carefully until it comes 1 Pull to a stop. 2 Place paper in the drawer(s). - Place paper face up. - Maximum number of sheets that can be set.
Adding Paper to the Large Capacity Feeder (Optional) out the large capacity feeder carefully 1 Pull until it comes to a stop. 2 Set paper aligned in tray (A) and tray (B). - Place paper face up. - Maximum number of sheets that can be set. "Acceptable Copy Paper Types and Sizes" Page 36 - Fan the paper well, then set it for (A) to the right side, and set it for (B) to the left side. (The paper can be set neatly if you pile up the paper little by little alternately in the tray (A) and (B).
3. REPLACE TONER CARTRIDGE SYMBOL When the toner in the cartridge runs out, the REPLACE TONER CARTRIDGE symbol blinks. When the black toner runs out, “Install new Black toner cartridge” appears. When the yellow, magenta or cyan toner runs out, “Install new ***** toner cartridge. Press *** button.” appears. Then press the [***] button. 12 246 12.
Recommendation for Original Toner At Toshiba we strive to provide you with the highest quality images. Please use genuine Toshiba toner to ensure that you continue to receiving quality output that is environmentally safe.
3.REPLACE TONER CARTRIDGE SYMBOL (Cont.) Replacing the Black (K) Toner Cartridge 1 Open the front cover. pushing on the latch, lower the 2 While cartridge holder toward you. 3 Pull the cartridge out carefully. - If you cannot pull it straight out, pull it out rotating it clockwise. If it cannot be pulled out, close the front cover, turn the power switch OFF and then ON again. When “Install new Black toner cartridge” appears, start the procedure again from step 1.
and shake the new toner cartridge 4 Tap well to loosen the toner inside. the toner cartridge upright, and pull 5 Stand out the seal in the direction of the arrow. 6 Insert the cartridge completely. - Match the label (orange) on the equipment with the shutter (orange) on the toner cartridge, then insert it. - If the cartridge becomes dirty with toner, clean it before inserting it. the cartridge holder to its original 7 Return position.
3.REPLACE TONER CARTRIDGE SYMBOL (Cont.) 8 Close the front cover. - “Wait adding toner” appears. The equipment automatically starts supplying toner. Replacing the Yellow (Y), Magenta (M), Cyan (C) Toner Cartridge * When you want to replace a cartridge before the REPLACE TONER CARTRIDGE symbol blinks, see the [User Function Guide]. * When replacing a toner cartridge, the procedures are displayed on the screen. Follow them by pressing and buttons to switch the screen.
cartridge is moved to the appropriate 2 The position to be replaced. 3 Open the front cover. on the latch, and then pull out the 4 Push cartridge. NEVER attempt to incinerate toner cartridges. This could cause an explosion. DO NOT dispose of used toner cartridges. Your service technician will collect them. the new toner cartridge well to 5 Shake loosen the toner inside.
3.REPLACE TONER CARTRIDGE SYMBOL (Cont.) the new toner cartridge, pull out 6 Holding the seal in the direction of the arrow. 7 Insert the cartridge completely. 8 Press the [FINISH] button. - When 2 or more cartridges are empty, repeat the above procedure from step 1 to 6. 9 Close the front cover. 12 252 - “Wait adding toner” appears. The equipment automatically starts supplying toner. 12.
4. REPLACE TONER BAG SYMBOL When the toner bag becomes full of used toner, the REPLACE TONER BAG symbol blinks and “Dispose of used toner” appears. 1 Open the front cover. 2 Pull the toner bag out carefully. NEVER attempt to incinerate toner bags. This could cause an explosion. DO NOT dispose of used toner bags. Your service technician will collect them. 3 Put the lid on the toner bag. a new toner bag, and then close the 4 Set front cover.
5. CLEAR PAPER SYMBOL When a paper misfeed occurs in the equipment, the or symbol on the touch panel blinks in the positions where the paper is misfed. In that case, remove the misfed paper using the following procedure referring to the illustration below. 1 8 7 5 9 10 11 4 12 2 3 6 1. Paper Misfeed in the Reversing Automatic Document Feeder (optional) the button on the reversing 1 Push automatic document feeder to open the upper cover. - Remove any misfed originals. 12 254 12.
the green knob to remove any 2 Rotate misfed originals. misfed original still remains, rotate 3 Ifthethegreen knob to the opposite direction against the step 2. Then remove it. 4 Lift the green handle. - Remove any misfed originals. the green knob on your side in the 5 Rotate direction of the arrow and remove any misfed originals.
5.CLEAR PAPER SYMBOL (Cont.) the original feeding tray and remove 6 Lift any misfed originals. the original feeding tray, move the 7 Lower green knob toward the front and open the cover. 8 Remove any misfed paper. 9 Close the upper and lower cover. 12 2. Paper Misfeed in the Drawer Feeding Area 1 Open the cover. 256 12.
2 Remove any misfed paper. 3 Close the cover. 3. Paper Misfeed in the Large Capacity Feeder (optional) 1 Open the cover. 2 Remove any misfed paper. 12 Paper Misfeed in the Paper Feed Pedestal (optional) -Open the cover as shown on the right, and remove any misfed paper. 3 Close the cover.
5.CLEAR PAPER SYMBOL (Cont.) 4. Paper Misfeed on the Bypass Feed Unit 1 Pull out misfed paper on the bypass tray. 5. Paper Misfeed in the Automatic Duplexer sure that the bypass tray is opened, 1 Make and then open the automatic duplexer. - Be careful not to let your fingers be caught between the equipment and the automatic duplexer. This could injure you. - Do not touch the metal portion of a guide board as it could burn you.
6. Paper Misfeed in the Jam Releasing Unit sure that the bypass tray and the 1 Make automatic duplexer are open, then open the jam releasing unit cover. the green knob as indicated by the 2 Rotate arrow toward the inside and remove any misfed paper. the jam releasing unit cover, the 3 Return automatic duplexer and the bypass tray to the original positions. - Be sure to close both sides of the automatic duplexer firmly. 7.
5.CLEAR PAPER SYMBOL (Cont.) 2 Open the fuser unit cover. the knob (A), open the transport 3 Holding guide. (A) any misfed paper inside the fuser 4 Remove unit. the transport guide and the fuser 5 Close unit cover. Push up the fuser pressure release lever to return the jam releasing unit cover, the automatic duplexer and the bypass tray to the original positions. 12 the lever toward you to loose the 6 Pull misfed paper. Hook a finger under the (1) loosen part of it, and then pull it out.
pull it out with both hands to 7 Furthermore, remove it. 8. Paper Misfeed in the Relay Unit (optional) the cover handle of the relay unit, 1 Holding open the cover. any misfed paper that is inside 2 Remove the relay unit. 12 z Remove the misfed paper from the fuser unit side if it is easier. 3 Close the relay unit cover.
5.CLEAR PAPER SYMBOL (Cont.) 9. Paper Misfeed in the Hole Punch Unit (optional) the front cover of the hole punch 1 Open unit (optional). 2 Raise the Hole Punch Unit. the green knob to locate the arrow 3 Rotate within the area on the label. - Under this condition, the punchers are up, allowing the paper shown in the illustration to be removed. - If the misfed paper still remains, open the upper cover of the finisher to remove it.
10. Paper Misfeed in the Finisher (optional: MJ-1024/1023) the upper cover of the finisher until 1 Open it locks. - Remove any misfed paper. Hold up the guide and remove any misfed 2 paper in the paper exit area. 3 Close the upper cover.
5.CLEAR PAPER SYMBOL (Cont.) 11. Paper Misfeed in the Single-staple Finisher (optional: MJ-1022) the lever and move the finisher 1 Pull carefully away from the copier. the green lever and remove any 2 Lift misfed paper. Remove any misfed paper in the paper 3 exit area. 4 Install the finisher to the equipment. Be careful not to let your fingers be caught between the equipment and the finisher (optional). This could injure you. 12 264 12.
12. Paper Misfeed in the Saddle-Stitch Finisher (optional: MJ-1024) * Only when the saddle-stitch finisher (MJ-1024, optional) is installed the front cover of the saddle-stitch 1 Open finisher. the green handle toward the right 2 Slide and remove the misfed paper. the lower portion of the green 3 Press handle.
5.CLEAR PAPER SYMBOL (Cont.) any misfed paper and return the 4 Remove handle to its original position. 5 Turn the right-hand knob anticlockwise. the left-hand knob, turn it 6 Pushing clockwise. 12 266 any misfed paper on the exit side 7 Remove of the saddle stitch unit. 12.
the lever and open the exit cover of 8 Raise the saddle stitch unit. - Remove any misfed paper. 9 Close the exit cover and the front cover.
6. ADDING STAPLES (OPTIONAL) When the staple in the cartridge runs out, “Check staple cartridge” appears. Add staples to the cartridge according to the procedure below. Saddle-Stitch Finisher (MJ-1024)/Multi-Staple Finisher (MJ-1023) 1 Open the front cover of the finisher. - When MJ-1024 is installed - When MJ-1023 is installed 2 Take out the staple cartridge. 12 268 12.
out the empty staple case from the 3 Take staple cartridge. 4 Pull out the seal holding the staples. - Be careful that the staples are not misaligned. the new staple case into the staple 5 Push cartridge until it clicks. the staple cartridge to its original 6 Return position. 12 - Insert the cartridge until it is caught by the latch and fixed with a click sound. 7 Close the front cover of the finisher. If “Check staple cartridge” remains, repeat the above procedure from step 1 to 7.
6.ADDING STAPLES (OPTIONAL) (Cont.) Saddle-Stitch Finisher (MJ-1024) * Only when the saddle-stitch finisher (MJ-1024, optional) is installed 1 Open the front cover of the finisher. the saddle stitch unit carefully 2 Slide toward the front. the handle of the saddle stitch holder 3 Pull (1) toward you and turn it (2) 90º in the direction of the arrow. (2) (1) 12 270 12.
the empty staple case and 4 Remove replace it with a new one. - Replace both staple cases with new ones. the saddle staple to its original 5 Return position. - Pull the handle of the saddle stitch holder (1) toward you and turn it (2) 90º in the direction of the arrow. (2) (1) the saddle stitch unit to its original 6 Return position. sure that A3, A4-R or B4 paper is 7 Make set. - If any of the above paper sizes is not set, test stapling cannot be performed. the front cover of the finisher.
6.ADDING STAPLES (OPTIONAL) (Cont.) Single-Staple Finisher (MJ-1022) the lever and move the finisher away 1 Pull carefully from the equipment. 2 Take out the staple cartridge. the empty staple case from the 3 Remove staple cartridge. 12 4 Set the new staple case. - Push a new staple case into the staple cartridge until it clicks. - Do not remove the seal holding the staples before the staple case is set in the cartridge. 272 12.
out the seal holding the staples 5 Pull straight upward. the staple cartridge to its original 6 Return position. - Insert the cartridge until it is caught by the latch and fixed with a click sound. If “Check staple cartridge” remains, repeat the above procedure from step 1 to 6. 7 Install the finisher to the equipment. Be careful not to let your fingers be caught between the equipment and the finisher (optional). This could injure you.
7. REMOVING JAMMED STAPLES (OPTIONAL) If copies have not been stapled in the staple mode, “Examine stapler” appears. This shows that the staples are jammed. Remove them as described below. Saddle-Stitch Finisher (MJ-1024)/Multi-Staple Finisher (MJ-1023) 1 Open the front cover of the finisher. - When MJ-1024 is installed - When MJ-1023 is installed 2 Take out the staple cartridge. 12 274 12.
the staple cover while holding the 3 Lower knob. (A) - A: stapler Do not touch the stapling area. The stapler could injure you. 4 Remove any jammed staples. the staple cover to its original 5 Return position while holding the knob. the staple cartridge to its original 6 Return position. 12 - Insert the cartridge until it is caught by the latch and fixed with a click sound. 7 Close the front cover of the finisher.
7.REMOVING JAMMED STAPLES (OPTIONAL) (Cont.) Saddle-Stitch Finisher (MJ-1024) * Only when the saddle-stitch finisher (MJ-1024, optional) is installed 1 Open the front cover of the finisher. the saddle stitch unit carefully 2 Slide toward the front. the handle of the saddle stitch holder 3 Pull (1) toward you and turn it (2) 90º in the direction of arrow. (2) (1) 12 276 12.
the staple cases from the staple 4 Remove cartridges. pushing down on the lever (1), pull 5 While up the knob (2). (1) (2) any jammed staples, and then 6 Remove return the knob (2) to its original position. (2) Do not touch the stapling area. The stapler could injure you. the staple cases to their original 7 Return position.
7.REMOVING JAMMED STAPLES (OPTIONAL) (Cont.) the saddle staple to its original 8 Return position. - Pull the handle of the saddle stitch holder (1) toward you and turn it (2) 90º in the direction of the arrow. (2) (1) the saddle stitch unit to its original 9 Return position. sure that A3, A4-R or B4 paper is 10 Make set. - If any of the above paper sizes is not set, test stapling cannot be performed. the front cover of the finisher. Then 11 Close test stapling is automatically performed on a blank sheet.
Single-Staple Finisher (MJ-1022) the lever and move the finisher away 1 Pull carefully from the equipment. 2 Take out the staple cartridge. the staple cover while holding the 3 Lower knob. (A) - A: stapler Do not touch the stapling area. The stapler could injure you. 4 Remove any jammed staples.
7.REMOVING JAMMED STAPLES (OPTIONAL) (Cont.) the staple cover to its original 5 Return position while holding the knob. the staple cartridge to its original 6 Return position. - Insert the cartridge until it is caught by the latch and fixed with a click sound. 7 Install the finisher to the equipment. Be careful not to let your fingers be caught between the equipment and the finisher (optional). This could injure you. 12 280 12.
8. DISPOSING OF THE PUNCHED PAPER BITS (OPTIONAL) When paper bits punched from copies have accumulated to a certain level, “READY (HOLE PUNCH DUST BIN IS FULL)” appears. Dispose of the paper bits as described below. the front cover of the hole punch 1 Open unit. out the black case, and then dispose 2 Pull of the paper bits. 3 Return the case to its original position. the front cover of the hole punch 4 Close unit.
9. CALL SERVICE SYMBOL/PERIODIC MAINTENANCE MESSAGE Call Service Symbol Never attempt to repair, disassemble or modify the equipment by yourself. You could cause a fire or get an electric shock. Always contact your service representative for maintenance or repair of the internal parts of the copier. When the CALL SERVICE symbol blinks and “Misfeed in copier Press HELP” appears, output is no longer possible. Contact your service technician.
13. MAINTENANCE 1. DAILY INSPECTION ..........................................................................................................284 2. SIMPLE TROUBLESHOOTING.........................................................................................
1. DAILY INSPECTION Items for Daily Check Power switch ON/OFF status We recommend that you turn the power switch ON at the startup everyday so as to use whenever needed. Also, be sure to turn the power switch OFF when you leave the office, except in the following cases: - When the off-mode (or sleep mode) is set; - When the weekly timer is in use; - When the Fax (optional) is installed; Weekly Maintenance Cleaning the original glass, the original cover, the scanning area and the guide area.
2. SIMPLE TROUBLESHOOTING Check the following items and, if the problem still occurs, call your service representative for assistance. NEVER attempt to repair, disassemble or modify the equipment by yourself. You could cause a fire or get an electric shock. ALWAYS contact your service representative for maintenance or repair of the internal parts of the equipment.
2.SIMPLE TROUBLESHOOTING (Cont.) Image Density is too Low Items to be checked Countermeasure Reference page Has the message “Install new toner cartridge” appeared on the screen? Replace the toner cartridge. "3.REPLACE TONER CARTRIDGE SYMBOL" Page 246 Is the image density or the background adjustment set lighter than is standard? Use the manual density buttons or the background adjustment function to adjust the image density properly. "Manual Copy Density Mode" Page 94, "4.
Images are Stained Items to be checked Countermeasure Reference page Is the original cover or the Close the cover or the feeder optional reversing automatic properly to shut out any outer document feeder firmly closed? light. "When Placing an Original on the Glass" Page 47 Are the original glass, the original cover and the scanning area dirty? Clean them up. "Weekly Maintenance" Is the image density set properly? Adjust the image density properly with the [AUTO] button or manual density buttons.
2.SIMPLE TROUBLESHOOTING (Cont.) Images are Partially Missing Item to be checked Countermeasure Reference page Are the original size and direction, as well as the reproduction ratio suitable for the paper size? Select copy paper of the same size as the original, or set the reproduction ratio suitable for the paper size. "1.PAPER SELECTION" Page 66, "3.REDUCTION AND ENLARGEMENT COPYING" Page 72 Is the margin on the copy set properly? Adjust the image shift value. "1.
14. SPECIFICATIONS & OPTIONS 1. e-STUDIO3511/4511 SPECIFICATIONS ...........................................................................290 2. SPECIFICATIONS OF OPTIONS ......................................................................................293 3. PACKING LIST...................................................................................................................301 4. COPYING FUNCTION COMBINATION MATRIX ..............................................................302 5.
1.
Paper Supply Drawer 600 sheets (64 g/m2) Bypass 100 sheets (64 g/m2) Toner Density Adjustment Black (K): Magnetic auto-toner system Yellow (Y)/Magenta (M)/Cyan (C): Optical auto-toner system Exposure Control Automatic plus manual selection from 11 exposure step Environment (for normal use) Temperature: 10-30ºC, Humidity: 20-80% (No Condensation) Power Requirements 220-240 V ±10% (50/60 Hz) 110-127 V ±10% (50/60 Hz) (for Saudi Arabia 100V version only) Power Consumption At least 1.
1.e-STUDIO3511/4511 SPECIFICATIONS (Cont.) Continuous Copying Speed Paper Type Paper size Unit: sheets/min. Feeder e-STUDIO3511 Black-andwhite Plain Paper 11 45 11 Bypass 35 11 45 11 Drawer 28 5.4 32 5.4 Bypass 28 5.4 32 5.4 Drawer 24 5.4 26 5.4 Bypass 24 5.4 26 5.4 Drawer 21 5.4 22 5.4 Bypass 21 5.4 22 5.4 A4, A5-R, B5, LT, ST-R Drawer 30 11 30 11 Bypass 30 11 30 11 Drawer 23 5.4 23 5.4 Bypass 23 5.4 23 5.4 Drawer 19 5.4 19 5.
2. SPECIFICATIONS OF OPTIONS Reversing Automatic Document Feeder Model Name MR-3015 Copy Sides 1-side, Duplex Number of Originals (A4) 100 originals (50-80 g/m2) Feeding Speed Black-and-white: 105-420 mm/s Acceptable Originals A3 - A5-R, LD - ST-R (A5 and ST are not acceptable) Paper Weight 50-127 g/m2 (1-sided original), 50-105 g/m2 (2-sided original) Power Source Power supplied from the equipment Dimensions 557 mm (W) x 530 mm (D) x 165 mm (H) Weight Approx.15 kg Power Consumption 43.
2.SPECIFICATIONS OF OPTIONS (Cont.) Additional Drawer Module Model Name MY-1021 Acceptable Paper Size A3 - A5-R, LD - ST-R (A5,ST and non-standard size are not acceptable) Paper Weight 64-105 g/m2 Maximum Capacity 550 sheets (80 g/m2) Dimensions 556 mm (W) x 528 mm (D) x 165 mm (H) Weight Approx. 3.
Tray Loading Capacity (See "Available Conditions for Saddle Stitch" Page 84 for the saddle stitch tray.) (MJ-1024 with mixed paper not loaded) Mode Non-Sort Tray No. 1 A4, A5-R, B5, LT, ST-R, 147 147 (1,000) (1,000) 2 Sort/Group Staples loaded 1 1 2 147 147 147 (1,000) (1,000) (1,000 sheets or 30 sets) A3, A4-R, B4, B5- 73.5 R, FOLIO, LD, LG, (500) LT-R, COMP 73.5 (500) 2 73.5 (500) 73.5 (500) 147 (1,000 sheets or 30 *1 73.5 (500 sheets or 30 sets) sets) *1 73.
2.SPECIFICATIONS OF OPTIONS (Cont.
(MJ-1023 with mixed paper loaded) Mode Non-Sort Sort/Group Staples loaded Tray No. 1 2 1 2 1 2 LD and LT 73.5 (500) 73.5 (500) 73.5 (500) 73.5 (500) Whichever 73.5 mm, 500 sheets or 30 sets Whichever 73.5 mm, 500 sheets or 30 sets LG and LT-R 73.5 (500) 73.5 (500) 73.5 (500) 73.5 (500) is reached first. A4-R and FOLIO 73.5 (500) 73.5 (500) 73.5 (500) 73.5 (500) A3 and A4 73.5 (500) 73.5 (500) 73.5 (500) 73.5 (500) B4 and B5 73.5 (500) 73.5 (500) 73.5 (500) 73.
2.SPECIFICATIONS OF OPTIONS (Cont.
(MJ-1022 with mixed paper loaded) Mode Non-Sort Tray No.
2.SPECIFICATIONS OF OPTIONS (Cont.) Hole Punch Unit Model Name MJ-6004 Acceptable Paper Size A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP Acceptable Paper Weight 60-256 g/m2 (OHP film and specially treated paper are not available) Dimensions 112 mm (W) x 617 mm (D) x 378 mm (H) Weight Approx. 9 kg Number of punch holes and hole diameter Available paper sizes Japan and most of Europe MJ-6004E 2 holes (6.5 mm dia.
3.
302 14.SPECIFICATIONS & OPTIONS YES Rotate sort YES YES SADF Image direction The function set first takes precedence. NO: YES Page number The functions can be combined.
YES YES YES YES YES YES YES YES YES YES YES NO NO YES YES YES YES YES YES YES YES The function set first takes precedence. YES YES The functions can be combined.
304 14.SPECIFICATIONS & OPTIONS YES YES Warm Cool *1 *1 *1 *1 *1 YES *1 *1 *1 *1 *1 YES ACS YES YES YES YES YES YES YES YES *1 *1 *1 YES Full colour *1 *1 *1 *1 *1 YES *1 *1 *1 *1 *1 YES Black Colour mode The functions can be combined. The function set first takes precedence.
INDEX Numerics 1-Sided Originals -> 1-Sided Copies (default setting) .............................................................. 88 1-Sided Originals -> 2-Sided Copies ................. 88 2 IN 1/4 IN 1 .....................................................113 2-Sided Originals -> 1-Sided Copies ................. 90 2-Sided Originals -> 2-Sided Copies ................. 89 A Acceptable copy paper types and sizes ............ 36 Acceptable Original Types and Sizes ................
INDEX (Cont.) Cost Advantage ................................................... 7 COVER COPYING .......................................... 122 Cover sheet copying ......................................... 57 Creating a Bookbinding Margin ....................... 107 Creating a Right or Left Margin ....................... 106 Currently selected drawer size .......................... 27 D DAILY INSPECTION ....................................... 284 Date and time ..............................................
INSERT SOURCE 2 ........................................ 126 Inside the Single-feed Mode ............................. 51 INTERNET FAX ...................................... 161, 162 Internet Fax Transmission Overview ............... 162 INTERRUPT button ..................................... 24, 57 INTERRUPT COPYING .................................... 57 Items for Daily Check ...................................... 284 J JAM RELEASING UNIT MISFEED ................. 242 JOB STATUS ...........................
INDEX (Cont.) PRINTING STORED DOCUMENT ................. 219 Printing the Stored Document with Added/Changed Settings ................................ 221 Priority Transmission ....................................... 178 Private Print ..................................................... 190 PRIVATE PRINT JOB ...................................... 190 PROOF PRINT JOB ........................................ 188 R RECALLING TEMPLATE ................................ 225 Receiving from POP3 Server ...........
TOUCH PANEL ..................................... 20, 24, 27 Touch panel contrast adjustment volume .......... 20 Touch-buttons .................................................... 27 Tray load capacity ....................................... 81, 84 Trays ................................................................. 77 Trimming ..........................................................118 Trimming/Masking ............................................118 TURNING ON THE POWER SWITCH .............
INDEX (Cont.
Version 1.0 TOSHIBA TEC Germany Imaging Systems GmbH Carl-Schurz-Straße 7 . 41460 Neuss Phone: +49 - (0) 2131/ 1245-0 Fax: +49 - (0) 2131/ 1245-402 www.toshiba-europe.
