CCD Mo n o c h r o m e Vi d e o C a m e r a CS3330Bi CS3330Bi SERIES CS3330BLi Sp e c i f i c a t i o n CONTENTS Before use – General safety instructions 1. PRODUCT DESCRIPTION……… .................................................................. 1 2. FEATURES................................................................................................... 1 3. CONSTITUTION........................................................................................... 1 4.
BEFORE USE - GENERAL SAFETY INSTRUCTIONS This instruction manual contains important information for the operator (user) and/or people in the vicinity to avoid personal injury, or property damage. • Prior to use, read this operation manual carefully to fully understand its instructions for correct use. • After reading, keep this manual near the equipment for future reference. WARNINGS & CAUTIONS [Definition of markings] The meaning of each mark used in this instruction manual is given below.
●Handling Precautions WARNING unplug Immediately cease use of the equipment in the event of abnormality or malfunction. If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign matter, or if the equipment is dropped or malfunctions, fire or electric shock may result. If such abnormalities occur, disconnect the power plug from the outlet and contact your sales representative. Do not use the equipment in locations subject to water splashes.
CAUTION Observe the following when installing the equipment: · Do not cover the equipment with a cloth, etc. · Do not place the equipment in a narrow location where heat is likely to accumulate. Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire. Instruction Do not place the equipment in locations subject to high moisture, oil fumes, steam, or dust. Otherwise, fire or electric shock may result.
CASES FOR INDEMNITY (LIMITED WARRANTY) We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in the following cases. In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party, deliberate or accidental misuse by the user, or use under extreme operating conditions.
Usage Precautions Handle carefully Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause malfunctions. Further, do not damage the connection cable, since this may cause wire breakage. Environmental operating conditions Do not use the product in locations where the ambient temperature or humidity exceeds the specifications. Otherwise, image quality may be degraded or internal components may be adversely affected.
1. PRODUCT DESCRIPTION Model CS3330Bi/BLi is monochrome video camera with charge coupled device (CCD). These cameras are composed of camera head and camera controller (CCU). 2. FEATURES The video cameras have the following technical features. (1) High resolution A 380,000 pixel CCD incorporated in the unit provides horizontal resolution of 570 lines. (2) High reliability Realize extremely low graphic distortion and after-images levels.
4. SPECIFICATION 4-1 Mechanical specifications Overall dimensions and weight Camera head: Camera control Unit: Camera cable: Lens mount: Refer to the attached camera head diagram. 220(w) x 60(H) x 240(D) mm (excluding rubber casters) Mass : approx. 2.6 kg 6.3mm(dia.) x 3 m length C mount 4-2 Electrical specifications TV system: Based on EIA standard Pickup Device: Effective pixels: Unit cell size: Sensing area: Aspect rate: Interline transfer CCD ICX422AL 768(H) x 494(V) pixels 11.6(H) x 13.
Phase difference: The phase difference between the trailing edge of VD and the trailing edge of HD must be as shown below. 1st field 2nd field VD HD t1=0+/-5 micro sec Output signal: t2=1/fH/2 +/-5 micro sec HD,VD negative polarity Level: 3.5 to 4.5V(p-p) / 1k ohm terminated 8.0 to 9.0V(p-p) / high Pulse width: Repeat frequency: HD: 6.36±0.5 micro sec VD: 572±5 micro sec fH =15.
Electronic shutter: ON/OFF switching (TV synchronization): Shutter speed: Selectable at 1/60sec, 1/125sec, 1/250sec, 1/500sec, 1/1,000sec, 1/2,000sec,1/4,000sec, (during exposure): 1/10,000sec and flicker less CCD operation mode: frame store mode Power supply: AC100V +/-10%, 50/60Hz,150mA ± 20% Ambient condition: Temperature: From 0 through 40 degrees Humidity: From 30 through 90% (No condensing) 4 This specification subjects to change without notice.
5. APPEARANCES 5-1 Appearance of the camera head 5 This specification subjects to change without notice.
5-2 Appearance of the camera head with mount metal fitting Specifications Material: Lens mount: Frame, cover: Mount metal fitting: Stainless steel Aluminum alloy Aluminum alloy Finish coating: Frame, cover: Mount metal fitting: Black alumite finish Elidite finish C mount Cover Frame Lens mount Mount metal fitting 2-M3 depth:6 1/4-20 UNC depth:6 6 This specification subjects to change without notice.
5-3 Appearance of the camera control unit for CCD camera (CS3330Bi) 7 This specification subjects to change without notice.
5-4 Appearance of the camera control unit for CCD camera (CS3330BLi) 8 This specification subjects to change without notice.