Telephone User Manual

Station Apparatus
Add/Edit TSP Configuration Information
Strata CTX I&M 06/04 11-13
Station Apparatus
Add/Edit TSP Configuration Information
1. Select Start > Setting > Control Panel. Select either the Telephony or Phones and Modems
(name is dependant upon the operating system used).
2. Select Advanced Tab to see a current list of providers. If “Toshiba CTX TAPI Service
Provider” is not found, click ADD, select it and click OK.
3. Highlight “Toshiba CTX TAPI Service Provider” and click Configure. Enter/Edit the
information on the screen (see Steps 3 and 4 above for additional information).
4. When finished, click OK > Close.
Test/Use TAPI Service Provider
An easy way to test or use your TAPI Service Provider is to use “Phone Dialer” supplied in most
Windows® operating systems. This program is typically found in “Accessories/Communications/
Phone Dialer.”
1. From the Main Menu, select Edit/Options.
2. In the Line Tab choose the Phone option for Preferred Line for Calling.
3. In Line used for Phone Calls, pull-down the list and select the appropriate line to use when
making a call. For example:
Toshiba CTX TSP Ext. 3351, Address 0 is typically the primary DN for extension 3351
IPT Telephone
Toshiba offers an Internet Protocol (IP) Telephone
model, the IPT1020-SD. The BIPU-M2A PCB IP
telephone interface must be installed in the Strata
CTX100 or CTX670.
The IPT1020-SD is a 20-button speakerphone model
equipped with an LCD that displays two rows of 24-
characters. The speakerphone enables users to make and
receive outside and internal calls without lifting the
handset. A full-duplex speakerphone is not supported.
The IPT has the following features:
• Full DKT feature set (except Speaker OCA)
• DKT Anywhere
• Automatic Configuration
• Terminal Authentication (security)
• Digital Add-on Modules (DADM3120)
• Built-in headset interface for headsets and external speaker connection (HESB)
•See Chapter 9 – IP Telephony and QSIG Over IP for more information on IPTs, the
DADM31020 and the BIPU-M2A PCB.