00GB_CV505D_EngOM.
00GB_CV505D_EngOM.
00GB_CV505D_EngOM.book Page 3 Thursday, February 7, 2008 3:10 PM Contents SETTING UP Panel lock ............................................................ 27 The timers ............................................................ 28 Programme timer – digital only .................... 28 Sleep timer .................................................... 28 Digital on-screen information and Programme Guide ............................................. 29 Information .........................................
00GB_CV505D_EngOM.book Page 4 Thursday, February 7, 2008 3:10 PM SETTING UP Safety Precautions DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND 'LIVE' PARTS. This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety.
00GB_CV505D_EngOM.book Page 5 Thursday, February 7, 2008 3:10 PM SETTING UP Installation and important information Where to install Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Sturdy tie (as short as possible) Place on a sturdy platform, the mounting surface should be flat and steady.
00GB_CV505D_EngOM.book Page 6 Thursday, February 7, 2008 3:10 PM SETTING UP The remote control Simple at-a-glance reference of your remote control. 8 To alter the TV volume (T/R/D) 9 To mute the TV sound (T/R/D) 10 To display the digital on-screen Programme Guide (T) To access Top Menu (R/D) 11 To exit Menus (T) To return to previous Menu (R/D) 1 12 When using menus the arrows move the cursor on the screen up, down, left or right.
00GB_CV505D_EngOM.book Page 7 Thursday, February 7, 2008 3:10 PM SETTING UP Inserting batteries and effective range of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V. Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment.
00GB_CV505D_EngOM.book Page 8 Thursday, February 7, 2008 3:10 PM SETTING UP Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. OPTICAL DIGITAL AUDIO OUTPUT (DTV MODE ONLY) HDMI™ INPUT SOCKETS COMPONENT VIDEO INPUT (EXT3) SCART 2 (EXT2) SCART 1 (EXT1) FIXING STRAP POWER switch *a decoder could be Digital Satellite or any other compatible decoder.
00GB_CV505D_EngOM.book Page 9 Thursday, February 7, 2008 3:10 PM SETTING UP Connecting an HDMI™ or DVI device to the HDMI input To connect a DVI device Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to HDMI1 terminal and audio cables to the PC/ HDMI1 (AUDIO) socket (see illustration). • The recommended HDMI-to-DVI adapter cable length is 6.6 ft (2m). • An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required. • See “HDMI1 audio” on page 36.
00GB_CV505D_EngOM.book Page 10 Thursday, February 7, 2008 3:10 PM SETTING UP REGZA-LINK connection You can control the basic functions of connected audio/video devices using the televisions remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 37–38.
00GB_CV505D_EngOM.book Page 11 Thursday, February 7, 2008 3:10 PM SETTING UP Connecting a computer With either the RGB/PC or HDMI connection, you can watch your computer’s display on the television and hear the sound from the televisions speakers. • When PC input mode is selected some of the television’s features will be unavailable e.g. Manual setting in the SET UP menu, Colour, Tint, DNR and Black/White Level in the Picture settings menu.
00GB_CV505D_EngOM.book Page 12 Thursday, February 7, 2008 3:10 PM SETTING UP Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. Standby COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). Contact a service provider.
00GB_CV505D_EngOM.book Page 13 Thursday, February 7, 2008 3:10 PM TUNING THE TELEVISION Tuning Digital television When the search is complete the television will automatically select programme one. Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 6. The AUTO TUNING screen will display the total number of services found.
00GB_CV505D_EngOM.book Page 14 Thursday, February 7, 2008 3:10 PM TUNING THE TELEVISION You must allow the television to complete the search. Digital auto tuning NOTE: As new services are broadcast it will be necessary to retune the television in order to view them. When the search is complete the Auto tuning screen will display the total number of services found. Auto tuning will completely re-tune the television and can be used to up date the channel list.
00GB_CV505D_EngOM.book Page 15 Thursday, February 7, 2008 3:10 PM TUNING THE TELEVISION Digital programme sorting Digital manual tuning This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. NOTE: When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on. a The station order may be changed to suit personal preference.
00GB_CV505D_EngOM.book Page 16 Thursday, February 7, 2008 3:10 PM TUNING THE TELEVISION Tuning Analogue mode f The station order may be changed using the Manual tuning screen (see the analogue ‘Sorting programme positions’ section). Quick Setup The Quick Setup feature will tune all analogue channels currently available in the area. To put the television into ATV mode press the ATV/DTV button. a Select ATV mode. The Quick Setup screen will appear. Quick Setup Select your language.
00GB_CV505D_EngOM.book Page 17 Thursday, February 7, 2008 3:10 PM TUNING THE TELEVISION a Manual tune The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System. Use C and c to move across the screen and select any of these Manual Tune options.
00GB_CV505D_EngOM.book Page 18 Thursday, February 7, 2008 3:10 PM TUNING THE TELEVISION g h Each signal will show on the television, if it is not your media recorder, press B or b again to restart the search. When your media recorder signal is found, press c to move along to Station. With B, b, C and c put in the required characters, e.g. VCR. Programme skip To prevent certain programmes from being viewed, the programme position can be skipped.
00GB_CV505D_EngOM.book Page 19 Thursday, February 7, 2008 3:10 PM TUNING THE TELEVISION Sorting programme positions Using Auto tuning Channels may be moved and stored on the programme position of your choice. a Select Manual tuning from the SET UP menu. b With the list of stations now showing use B or b to highlight the station you want to move and press c.
00GB_CV505D_EngOM.book Page 20 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES General controls c In analogue mode, press M and C or c to select SOUND. Selecting programme positions To select a programme position use the numbered buttons on the remote control. To display on-screen information i.e. programme position, input mode or stereo/mono signal, press . Press again to cancel.
00GB_CV505D_EngOM.book Page 21 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES SRS WOW® sound effects Stable sound® SRS WOW is a suite of audio effects which use the stereo signals being broadcast to produce enhanced sound from the television’s speakers. If mono sound is broadcast only TruBass will be available.
00GB_CV505D_EngOM.book Page 22 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press repeatedly to select between 4:3, Super Live 1, Cinema 1, Subtitle, 14:9, Wide, Super Live 2, Cinema 2 and Native. SUPER LIVE 1 This setting will enlarge a 4:3 image to fit the screen by stretching the image horizontally and vertically, holding better proportions at the centre of the image.
00GB_CV505D_EngOM.book Page 23 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES WIDE 4:3 Native Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 broadcast. When using a PC connected via HDMI this setting will show the picture without over scan, i.e. WYSIWYG.
00GB_CV505D_EngOM.book Page 24 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES Picture controls Backlight Most of the picture controls and functions are available in both digital and analogue modes. To access the required menus when in digital mode: press M and using b select TV Setup, press Q then C or c to select the desired menu. PLEASE NOTE: features not available in digital mode will be greyed out.
00GB_CV505D_EngOM.book Page 25 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES Picture preferences Cinema mode This television offers the choice of personalising the picture style. Press to view the different styles available: If there are lines or jagged edges in the film or programme being viewed, selecting Cinema mode can help correct this by smoothing out the picture. Dynamic, Standard, Mild, Movie, Game* and PC** are preset options and effect many features/settings within the television.
00GB_CV505D_EngOM.book Page 26 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES 3D Colour management Active Backlight Control When 3D Colour management is selected it allows the ‘Base colour adjustment’ feature to become available. When Active Backlight Control is activated it will automatically optimise the backlighting levels for dark scenes. a a In the PICTURE menu press b to select 3D Colour management.
00GB_CV505D_EngOM.book Page 27 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES DNR – Digital Noise Reduction Side panel adjustment DNR enables you to ‘soften’ the screen representation of a weak signal to reduce the noise effect. The Side panel feature lightens or darkens the band each side of the screen when in 4:3 or 14:9 format. This helps prevent image retention of the band and can also make viewing in bright or dark conditions more comfortable. a Select DNR from the PICTURE menu.
00GB_CV505D_EngOM.book Page 28 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES The timers e Programme timer – digital only This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes. a When all the details have been entered press Q to save the timer.
00GB_CV505D_EngOM.book Page 29 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES Digital on-screen information and Programme Guide Guide a When viewing in digital mode, the on-screen information and programme guide give access to programme details for all available channels. Select the on-screen guide by pressing GUIDE, the guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear.
00GB_CV505D_EngOM.book Page 30 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES Digital settings – parental control Mode This feature locks various menus to prevent the television being retuned or the settings being overridden. In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked. These can then only be accessed with a security code PIN when in digital mode. a In the PARENTAL CONTROL menu press b to select Mode.
00GB_CV505D_EngOM.book Page 31 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES Digital settings – other features Locking programmes Locked Programmes stops the viewing of digital channels, they can only be accessed by entering the PIN. Selecting favourite programmes a From the FEATURE MENU press b to select Favourite and Locked Programmes. Favourite Programmes creates a list of the digital channels that are watched most.
00GB_CV505D_EngOM.book Page 32 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES Audio languages Audio description This feature allows a programme or film to be viewed with a choice of soundtrack language, provided they are currently being broadcast. Audio description is an additional narrative sound track for visually impaired people to understand and enjoy the story line more fully.
00GB_CV505D_EngOM.book Page 33 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES Common interface Auto Upgrade The Common Interface Slot, situated on the back of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information see a service provider.
00GB_CV505D_EngOM.book Page 34 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES PC settings – picture position, clock phase, sampling clock, reset Sampling clock Adjusting the Sampling clock alters the number of pulses per scan, this will clear vertical lines on the screen. a In the SET UP menu press b until PC Setting is highlighted. b Press Q to select, then b to highlight Sampling clock. c Use C or c to adjust until the picture clears.
00GB_CV505D_EngOM.book Page 35 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES Input selection and AV connections INPUT signal selection This specifies the type of signal going into SCART 2 (EXT2) on the back of the television. Please refer to the manufacturers instructions for the connected equipment. Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 8 for a clear view of the back connection recommendations.
00GB_CV505D_EngOM.book Page 36 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES PC audio HDMI1 audio In order to receive sound from a connected PC, plug the audio cable into the back of the television (as shown in ‘Connecting a computer’ section), then use the PC/HDMI1 audio settings.
00GB_CV505D_EngOM.book Page 37 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES Using REGZA-LINK Auto Standby When the Auto Standby is enabled the television when switched off will automatically switch off (standby mode) all connected REGZA-LINK equipment. This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the television remote control via HDMI connection (page 10).
00GB_CV505D_EngOM.book Page 38 Thursday, February 7, 2008 3:10 PM CONTROLS AND FEATURES NOTE: • These functions depend on the device connected. • If you select the REGZA-LINK input source from the popup window, some REGZA-LINK devices may automatically turn on. • When the television is switched on it will take a few minutes for the REGZA-LINK icon to appear in the list, when an HDMI cable is removed it will take a few minutes for the icon to disappear.
00GB_CV505D_EngOM.book Page 39 Thursday, February 7, 2008 3:10 PM TEXT SERVICES Text services Navigating pages using Auto. This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto. will display Fastext, if available. LIST will store your four favourite pages. If Fastext is available four coloured titles will appear at the base of the screen.
00GB_CV505D_EngOM.book Page 40 Thursday, February 7, 2008 3:10 PM TEXT SERVICES Digital interactive services Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing.
00GB_CV505D_EngOM.book Page 41 Thursday, February 7, 2008 3:10 PM PROBLEM SOLVING Questions and Answers Q A Q A Why is the VCR/DVD picture in black and white? a Select the Manual tuning menu. Highlight the station and press Q, then press c to select Manual fine tuning. b Using B or b adjust to get the best picture and sound. Press Q and then P. Below are the answers to some of the most common queries. For more information go to www.toshiba.co.
00GB_CV505D_EngOM.book Page 42 Thursday, February 7, 2008 3:10 PM PROBLEM SOLVING Q A Q A Q A Q A Why is the DTV main menu unavailable? Q A Q A Q A Q A Why are some of the digital subscription channels unavailable? Q A Another mode is selected. Press ATV/DTV to select DTV. Why are some of the menus locked? Lock Menu has been enabled (see 'Parental Controls' page). Why is the digital channel locked? The channel has been selected in Locked Programmes (see 'Digital Settings' section).
00GB_CV505D_EngOM.book Page 43 Thursday, February 7, 2008 3:10 PM PROBLEM SOLVING Q A Why are the LEDs on the front of the television flashing? Check the table below. LED indication Condition Solution LED-2 LED-1 OFF Green (Solid) The TV is operatin properly. – OFF Red (Solid) Standby with PowerOn – Green (Solid) Red (Solid) Active standby (Digital mode) – OFF Green (Solid) Sleep timer (Analogue mode) – OFF RED Blinks 0.5 sec cycle Power protect detection.
00GB_CV505D_EngOM.book Page 44 Thursday, February 7, 2008 3:10 PM INFORMATION Notes For your own records Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste.
00GB_CV505D_EngOM.
00GB_CV505D_EngOM.book Page 46 Thursday, February 7, 2008 3:10 PM INFORMATION Information Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
00GB_CV505D_EngOM.book Page 47 Thursday, February 7, 2008 3:10 PM INFORMATION Acceptable video or PC signals through HDMI terminals Format Resolution V. Frequency H. Frequency Pixel Clock Frequency 480i 720 × 480i 59.940/60.000Hz 15.734/15.750kHz 27.000/27.027MHz 576i 720 × 576i 50.000Hz 15.625kHz 27.000MHz 480p 576p 720 × 480p 720 × 576p 59.940/60.000Hz 50.000Hz 31.469/31.500kHz 31.250kHz 27.000/27.027MHz 27.000MHz 1080i 1920 × 1080i 59.940/60.000Hz 33.716/33.750kHz 74.176/74.
00GB_CV505D_EngOM.
00GB_CV505D_EngOM.
00GB_CV505D_EngOM.book Page 50 Thursday, February 7, 2008 3:10 PM Information The software pre-installed in TOSHIBA Digital Televisions consists of multiple, independent software components. Each software component is copyrighted by TOSHIBA or a third party. The TOSHIBA Digital Television uses software components that are distributed as freeware under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”).
00GB_CV505D_EngOM.book Page 51 Thursday, February 7, 2008 3:10 PM Exhibit A GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright © 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
00GB_CV505D_EngOM.book Page 52 Thursday, February 7, 2008 3:10 PM Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the program). Whether that is true depends on what the Program does. 1.
00GB_CV505D_EngOM.book Page 53 Thursday, February 7, 2008 3:10 PM c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with subsection b above.) The source code for a work means the preferred form of the work for making modifications to it.
00GB_CV505D_EngOM.book Page 54 Thursday, February 7, 2008 3:10 PM 8. If the distribution and/or use of the program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
00GB_CV505D_EngOM.book Page 55 Thursday, February 7, 2008 3:10 PM How to Apply These Terms to Your New Programs If you develop a new program, and you want it be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program.
00GB_CV505D_EngOM.book Page 56 Thursday, February 7, 2008 3:10 PM Exhibit B GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright © 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL.
00GB_CV505D_EngOM.book Page 57 Thursday, February 7, 2008 3:10 PM When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.
00GB_CV505D_EngOM.book Page 58 Thursday, February 7, 2008 3:10 PM 1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
00GB_CV505D_EngOM.book Page 59 Thursday, February 7, 2008 3:10 PM 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the Sections 1 and 2 above provided that you accompany it with the complete corresponding machine readable source code, which must be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange.
00GB_CV505D_EngOM.book Page 60 Thursday, February 7, 2008 3:10 PM c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
00GB_CV505D_EngOM.book Page 61 Thursday, February 7, 2008 3:10 PM 11. If, as a consequence of a court judgement or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradicts the conditions of this License, they do not excuse you from the conditions of this License.
00GB_CV505D_EngOM.book Page 62 Thursday, February 7, 2008 3:10 PM 16.
00GB_CV505D_EngOM.book Page 63 Thursday, February 7, 2008 3:10 PM Exhibit C /* zlib.h--interface of the 'zlib' general purpose compression library version 1.2.3, July 18th, 2005 Copyright © 1995-2005 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.
00GB_CV505D_EngOM.book Page 64 Thursday, February 7, 2008 3:10 PM Printed on recycled paper. 100% Chlorine free.
