Manual

Adjusting the picture preferences
You can select your desired picture type from three preset picture
modes: Normal, Theater, and Memory.
To select the picture preferences:
1. Press MENU, then press • or • to highlight the
PREFERENCES menu.
2. Press • or • to highlight PICTURE PREFERENCES.
3. Press • or • to highlight the mode you want.
The table below describes the effects of the different preferences.
normal
theater
memory
picture quality set at facto_
movie-like picture setting
your personal preference*
(see _djusung the picture quality on page 25)
Watching video input
You can use the TV/VIDEO button on the remote control or the
ANT/VIDEO button on the TV to view a signal coming from other
devices, such as VCRs or video disc players that may be connected to
your T_ (See "Connecting your TV" on page 2.)
Displaying on-screen information
Press RECALL to display the following on-screen information:
• Antenna mode (when in TV mode)
• Channel number or VIDEO mode selected
• Channel label (if preset)
• Stereo or SAP (second audio program) audio status
Setting the off-timer
You can set the TV so it turns offautomatically.
To set the off-timer:
1. Press MENU, then press • or • to select the SET UP menu.
2. Press • or • to select the OFF TIMER.
3. Press • or • to select the offtime (10-180 minutes, in 10-minute
increments).
4. Press EXIT to exit the menu.
To cancel the off-timer:
Press POWER twice, once to turn the TV off, and once to turn it
on again.
Auto power off
The TV will automatically turn itself off after approximately 15
minutes if it is tuned to a vacant channel or if a station completes its
broadcast for the day and stops broadcasting on that channel. This
feature, however, does not work in the VIDEO mode.
O
AnWideo
Recall
Power
AY_
Menu
Exit
26