Installation guide

Ira]=1_]
Ira]:|iN
Ira]:l _]
Im]:l il
Im]:l _'_
Setting up the remote control
While pressing -k, press 2.
O
The remote control mode is set to '"DR 2".
®
Select the same mode that you have set to the recorder.
When using with DR 1
mode
When using with DR 2
mode
When using with DR 3
mode
Mode setting
Recorder
DR 1
DR 2
DR 3
Remote control
0÷®
J
Notes
• If the recorder's mode and the remote control's mode are different, the recorder's mode (DR 1, DR 2 or DR 3) appears in the
display of the front panel.
• When the batteries of the remote control are replaced or when the time indicator of the front panel flashes, check the remote
control modes of both the recorder and the remote control, and re-program if necessary.
• Disabling the remote control for a temporary period
You can temporarily disable the reception of the remote control signals at the recorder, when the selection of DR 1,
DR 2 and DR 3 is not sufficient while you are using several Toshiba DVD video recorders.
Press the CH buttons on the recorder at the same time for three seconds or more.
The recorder display shows "DR - OFF", indicating that the remote control is disabled.
To enable the remote control, perform the same step again. (The display shows "DR-I", "DR-2" or "DR-3" depending
on your setting.)
Note
• This function is available while the recorder is turned on.
45