DVD Video Recorder Operations Guide

Recording
44 EN
Basic recording (cont’d)
6
Select the desired channel to record using
[PROG.
/ ] or [the Number buttons].
7
Press [REC I] to start recording.
The “I” mark will be displayed for 5 seconds.
To pause the recording, press [PAUSE F]. Press [PAUSE F] or
[REC I] again to resume recording.
8
Press [STOP C] to stop the recording.
P12
I
Notes
• You can change the channel while in the REC pause mode.
• Recording starts immediately and continues until the disc is full or you stop recording.
• If the clock is not set, the date and time space next to title names in the Original or Playlist will be blank.
• You cannot change the recording mode while in the REC or REC pause mode.
• It is possible to record video only in the PAL system.
• If you want to monitor the programme that you are recording, make sure the device such as a set top box is turned off when
it is connected to AV2.
This operation may take awhile to
be completed.
05_Recording_BD.indd 4405_Recording_BD.indd 44 2006/02/24 18:03:042006/02/24 18:03:04