Installation guide
Connect to a TV equiped with audio/video inputs.
Connect as below for watching received channels or recorded contents. Watching via the RF OUT terminal
is not available.
_ (red)
To OUTPUT
(n/L)
Video/audio cable (supplied)
(white) _ (yellow)
To OUTPUT
(VIDEO)
To OUTPUT
(S-VIDEO)
S-Video cable (not supplied)
If the TV has an S-video input, connect the recorder
with an S-video cable. When using an S-video
cable, do not connect the yellow video cable.
TV or monitorwith
audio/video inputs
To S-video input
Tovideo inputs (yellow)
To audio input I _rort)
Connect the power cord of the recorder to a wall outlet.
Make sure that the powered recorder lights the LED on tile front panel.
To wall outlet
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the recorder to your TV, be sure to turn off the power and unplug both units from the wall outlet before any
connections.
• If your television set has one audio input, connect the left and right audio outputs of the recorder to aY cable adapter (not
supplied) and then connect to your TV.
• Connect the recorder directly to your TV. If you connect the recorder to a VCR, TVNCR combination, video selector or AV
amplifier, the playback picture may be distorted due to copy protection.
21