Installation guide

This step sets the recorder's clock and tuner to record broadcasting TV programs.

If there are discrepancies in the recorder's time display or changes made to receivable TV stations, you

should make this setting again.

When the recorder is operated for the first time, begin

from step 3.

Start

1 Press SETUP.

2 Press "4/ I_ to select "Initial settings", then press

SELECT/ENTER.

e.g.

Press • / • to select the setting to be adjusted,

then press SELECT/ENTER.

The submenu appears.

e.g. When "Time & Date setting" is selected:

..... e.g.

When the recorder is operated for the first time, input

settings in the following order.

1: Language setting _ page 32

2: Time and date setting _ page 33

3: Channel setting _ page 36

Notes

• To go back to the previous menu, press the 0 button.

• To exit the menu, press the SETUP button.

• If you exit the "Initial settings" menu without setting the clock and channels, a menu may automatically appear to remind you

to set them each time you turn on the recorder. Once you complete this process, the menu reminder will not appear again.