Installation guide

2:Time and datesetting
Set the recorder's clock. If it is not set correctly, the recorder cannot perform operations other than playback.
Start
When the recorder is operated for the first time, begin
from step 3.
Press SETUP.
Press </1_ to select "Initial settings", then
press SELECT/ENTER.
Press • / • to select "Time & Date setting",
then press SELECT/ENTER.
egI@
Press •/• to select "Auto" or "Manual", then
press SELECT/ENTER.
Auto : The recorder will set the time and date.
Proceed to step 5.
(This clock sets one time only.)
Manual : You can set the clock manually. See "Manual
clock setting". _ page 35
Select "Manual" to set the clock if not set correctly by
"Auto".
Auto clock setting
Press </1_ to select an item, then press • / •
to select a detailed setting.
e,g,
/
33