Installation guide

Press • / • to select the output sound format.

Bitstream:

Select when connected to an amplifier equipped with a

Dolby Digital, DTS, MPEG1 and MPEG2 decoder. (1_

page 26)

I Amplifier

I I

[] ©

The recorder outputs digital audio signals in the

bitstream format when you play a DVD video disc

recorded on the Dolby Digital, DTS, MPEG1 and

MPEG2 recording system.

Analog 2ch:

Select when connected to a TV or audio system via the

analog audio jacks. (_ pages 21,25)

PCM:

Select when connected to a 2 channel digital stereo

system. (@ page 26)

"-[ Amplifier [_

- ©

The recorder outputs sounds in the PCM 2ch format

when you play a DVD video disc recorded on the Dolby

Digital, MPEG1 and MPEG2 recording system.

Once the proper setting is selected, press

SELECT/ENTER.

The submenu disappears.

To exit the setting menu, press the SETUP button.

_ J

"B: Output sound setting" is complete. Go to "C: TV shape setting". (_ page 40)