Installation guide

Basic Setup

D: Remotecontrolsettings (Continued)

OperatingthesecondandthirdTOSHIBADVDvideorecorderswiththeremotecontrolofthisrecorder

Switches the codes to operate the recorder.

If you use the second and third TOSHIBA DVD video recorders, set the different remote codes for each recorder to

avoid confusion in the response of the recorders.

Example: Setting this recorder's remote control mode to DR 2, after another DVD recorder has been set to

DR 1.

(It is necessary to set the remote control mode on both the recorder and the remote control.)