DVD Video Recorder Owner's Manual

144
Function Setup
EN
Settings for Progressive Scan Mode (cont’d)
4
Using [K / L], select “Progressive”.
Press [ENTER].
5
Using [K / L], select “ON”. Press [ENTER].
Confirmation window will appear.
6
Using [{ / B], select “Yes”. Press [ENTER].
Final confirmation window will appear.
• If your TV does not support progressive scan, distorted picture or
blank screen will appear when “Yes” option is selected. In this
case, just wait for 15 seconds for auto recovery.
ON
Video - Progressive
OFF
Video - Progressive
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE: If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
Activate?
No
Yes
Video
OFF
Auto
Progressive
Still Mode
Functionsetup_CD.indd 144Functionsetup_CD.indd 144 2006/02/16 20:59:162006/02/16 20:59:16