Manual

_!i,__,i_ .
nnectJons with the TV or audio component
The exact arrangement you use to interconnect various video
and audio components to the DVD/VCR is dependent on the
model and features of each component. Check the Owner's
ManuaI provided with each component for the location of video
and audio inputs and outputs.
Connect to a TV with Audio/Video output
Youcan enjoy playback byconnecting the unitto a TV,
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs and other materials, is prohibited under
the Copyright Laws of the United States and
other countries, and may subiect you to civil
and/or criminal liability.
Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the supplied audio/video cable.
÷
Video output
Audio (L) output
Audio (R) output
To Video input--_,,,,,_ ToAudio (R) input
,I \To Audio (L) input
Audio/video cable (supplied)
II
DVD/VCR
Connect to a TV with SoVideo output
If your TV has an S-Video input, you can get higher quality by connecting it with the S-Video output of the unit using
the S-Video cable instead of connecting the video input of the TV to the video output jack of the unit.
ToAudio (L) input\ / ToAudio (R) input
Audiocable (notsupplied) _ _ ]-V
s-videocab,e notsupp,ied
DVDaudio (L)output ToS-Video
II I I I I I I I
÷
I I S-Video output
DVD audio (R) output
Connect to a TV with Component video output (for DVD/CD playback)
"Youcan enioy the highest quality picture by connecting the unit's component video out jacks to the component
video input iacks of your TV, with component video cables (not supplied).
Audio cable (not supplied)
To Component
video input
Component video cable (not supplied)
DVD/VCR DVDaudio (R)output
NOTES:
. When connecting to a TV using the video or S-Video iack, make sure that the progressive indicator on the
display window is not lit. If it is lit, the video and S-Video outputs do not feed the correct signals and you cannot
see any picture. To turn off the progressive indicator, make the progressive scanning mode inactive (see page
47).
. If the component video input jacks on a TV are the BNC type, use an adapter to convert the RCAjacks from the
component video cables to BNC (not supplied).
2O
2G10101A PI2-P21 20 _ 2/25/05, 1:30 AM