Manual

bbinq using other equipment
You can connect another VCR or camcorder to dubbing.
Typical connection: When using this unit as a recording device
Playback VCR
÷
To Video OUT--_x_--To Audio (R) OUT
/ "To Audio (L) OUT
AUDiO/VIDEO cord (supplied)
Recording VCR
Recording VCR
mj [_
°°/ . J .....
Te 'Video _N--0Q%._-- To Audio (R)IN
1[ T }_,..
_._ "To Audio (L) _N .,
AUDIO/WDEO cord (not supplied)
You can also connect to the audio/video input jack (L1) at the rear side
of this unit. In addition, each S-Video input jack at the front and rear
sides can be used for recording on the disc. (The S-Video input jack
cannot be used for recording on the video tape.)
When a video is recorded using this unit
NOTES:
• if using a monaural VCR or other
equipment, connect Audio (L) iN
jack to Audio OUT using only one
audio cable.
• When this unit is used as a play-
back device, a mark or a charac-
ter displayed on the screen is also
dubbed as an image. When the
screen display is set to OFF, see
"DISPLAY" on page 28.
• if no special permission is obtained
from the copyright owner, videos
recorded from TV programs or
movies can only be used for your
own personal enioyment.
• You may not dub a copy protected
video or DVD disc.
Preparation:
• Turn ON the TV and set the unit to the video input mode.
• Load a video tape where the erase-protection tab is not activated or
a disc with enough recording space. =
• To record onto a video tape, set the unit to VCR mode, whereas to
record onto a disc, set it to DVD mode.
Press _NPUT SELECT and set the channel to L2 (or L1).
L1 (LINE 1): on the rear panel
L2 (LINE 2): on the front panel
Confirm that L2 (or L1) appears on the display window.
2
Press REC MODE/SPEED and select the recording mode.
VCR: SP or SLP (See page 48)
DVD: SP, LP, SLP or XP (See page 52)
Press REC/OTR on this unit, then press PAUSE/STiLL
Press the PLAY button on the playback device, then press the
PAUSE/ST_LL button.
ReIeasethe and the still
recording
pause
playback simultaneously
to begin the duplicating process.
To stop dubbing, press STOP.
79
2G10101A P71-P79 79 _ 2/25/05, 1:32 AM