Manual

÷
eciai playback
Picture search
Reverse picture search function
Press PEW x 1 or x 2 during the playback.
Forward picture search function
Press RFWD x 1 or x 2 during the playback.
To resume normal playback: Press PLAY.
SPEED SEARCH TIMES
PICTURESEARCH SPEED
TAPE SPEED
PRESS ONCE PRESSTWICE
SP (Standard Play) 3 X 5 X
LP(Long Play) 7 X 9 X
SLP (Super Long Play) 9 X 15 X ,_
Still picture
Press PAUSE/STILL during playback.
To resume normal playback: Press PLAY or PAUSE/
STILL.
Slow motion
During playback, press SLOW.
To resume normal playback: Press PLAY or SLOW.
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the TRK +/- to reduce the noise bars.
If the still picture jitters excessively, press TRK +/- to
stabilize the still picture.
Frame by frame picture
Press PAUSE/STILL during playback.
Each time you press SLOW, the picture advances frame
by frame.
To resume normal playback: Press PLAY or PAUSE/
STILL.
Adjusting tracking condition
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic
tracking starts working and continuously analyzes the
signal to enable optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well dur-
ing playback, press TRK +/- to eliminate the noises.
"MANUAL TR." will appear. Press it briefly for a fine ad-
justment, or press and hold for a coarse adjustment.
* Press ATR to reactivate automatic tracking again.
"AUTO TR." will appear.
NOTES:
• The audio output is muted during SPEED SEARCH,
STILL, FRAME ADVANCE and SLOW MOTION.
• During picture search mode, there will be noise bars
which are caused by the system.
• The Special Playback will automatically change to
normal playback after approx. 5 minutes to protect
the video tape against excessive wear.
46
Repeat playback
The entire video tape will be played until its end. The
tape will then automatically rewind to the beginning and
the playback will be repeated.
1
2
3
Press REPEAT during VCR playback.
By pressing REPEAT
each time, "REPEAT
ON" or"REPEAT OFF"
is selected in turn.
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::__
When "REPEAT ON" is selected, the tape is played
back to the end, and then it is automatically rewound
to the starting point and played back again.
The display "REPEAT ON" goes off in about 3 sec-
onds.
To cancel repeat playback: Press REPEAT to se-
lect "REPEAT OFF".
instant skip
Press INSTANT SKIP during playback.
The video is rapidly forwarded for approx. 30 seconds
and playback resumes.
You may press the button up to six times in a row to
move 180 seconds ahead.
Audio output selection
When playing a pre-recorded Hi-Fi STEREO on video
tape, press AUDIO SELECT to select how the audio
will be heard through the speakers. Normally set to the
Hi-Fi STEREO position, this button can be set to the
MONO position if the stereo audio is of poor quality. The
"R" and "L" positions allow the audio from the Right or
Left Hi-Fi channel to be heard over both TV speakers.
This button has no effect when viewing a monaural audio
program. Each time when you press the button, output
selection display appears on the screen for several
seconds. Refer to the chart below.
OUTPUT SOUND HEARD ON BOTH
SELECTION SPEAKERS
STEREO STEREO
Lch LEFT CHANNELAUDIO
Rch RIGHT CHANNELAUDIO
MONO MONO
To display VCR operation status
Press DISPLAY. The clock, day of the week and more
information will be indicated.
DAY OF THE WEEK
OPERATING
HI-FI MODE
STEREO iN
AUTO
REPEAT SPEED
REAL TIME COUNTER
To cancel the display:
Press DISPLAY until all indicators disappear.
÷
2K70101A E P44-51 46 _ 07.129, 3:56 PM