Manual

÷
mer recording
NOTES:
• Recording starts a few seconds be-
fore the preset starting time.
• You cannot use the timer recording
for the both DVD and VCR at the
same time.
• You can playback the DVD during
the VCR timer recording, and you
can playback the VCR during the
DVD timer recording.
. The timer recording program is
stopped during timer recording, the
stopped program is not erased from
the timer recording list. In this case,
please cancel the program, other-
wise the stopped program will be
activated if the unit returns to timer
recording standby mode.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs and
other materials, is prohibited under
the Copyright Laws of the United
States and other countries, and
may subject you to civil and/or
criminal liability.
54
Stopping the timer recording
After the timer recording has started, you can cancel the timer record-
ing (but continue recording), or stop recording completely if you want.
To cancel the timer recording, press and hold TIMER REC for more
than 2 seconds. The timer indicator" [] "disappears from the display
and recording continues. Press STOP to stop recording completely.
Checking or changing the timer recording
When you want to check the selected timer recording, follow the steps
1 and 2 of "Setting timer recording" on page 52 and display the Timer
REC screen.
To change the timer recording, select the program to be changed and
press • or • to select _ and press ENTER. The changing method
is the same as recording a program for the first time.
To suspend the timer recording
You can suspend the program.
Select a program you want to suspend. Press • or • to select _,
and press ENTER. The selected program is suspended.
Press ENTER again to change the program is ready.
Cancelling the timer recording
Display the Timer REC screen.
Select the program you want to cancel and press • or • to select
and press ENTER, then the selected program will be erased from
the timer recording list.
in case Timer programs-overlap
Do not overlap timer programs as portions of the conflicting programs
will be lost. The first recording time has priority over the next recording
time as shown in the diagram below.
In this case, the next recording time is delayed a maximum of about
1 minute.
If you set up many timer recording programs at the same start time, the
priority will be the top program in the timer recording list.
8:00 9:00 10:00 11:00
Program 1 ,_ I
I
Program 2
. Deleted Parts--_
Program 3
Non Recorded Portion Pa_ts
Recording Prog.1 Prog.2 Prog.3
Control Settings ,_
÷
2K70101A E P52-55 54 _ 07.129, 3:57 PM