Manual

÷
bbing a tape onto a disc
@@@@@@@
You can record video or audio on a
video tape onto a disc.
Preparation:
• Turn ON the TV and set to the video input mode.
. Load a source video tape and a disc for recording.
• Remove the erase protection tab of the source video tape to prevent
the data from accidentally being erased.
. Confirm the disc space before operation.
• Press RESOLUTION repeatedly to turn OFF HDMI mode.
Press DVD to set this unit to DVD mode.
The DVD indicator will light.
2
Press REC MODE/SPEED and select the recording mode.
. When REC MODE/SPEED is pressed each time, "SP", "LP",
"SLP" or "XP" is selected in this order.
. The recording mode is indicated on both the TV screen and the
display window.
• For the details of the recording mode, see page 48.
3
Press VCR and set the unit to VCR mode.
\\/
NOTE:
Confirm that the VCR indicator lights.
4
Press DUBBING.
• The unit is changed to DVD mode automatically.
• The VCR is waiting for playback and the DVD is waiting for re-
cording. Then the following message will appear.
Press to select "Yes" and ENTER.
or
press
Dubbing starts.
• To cancel dubbing, select "No" and press ENTER.
÷
NOTES:
. Dubbing cannot be accomplished
when
- a copy protected tape is used.
- disc protection is set.
- disc has no recording space.
. Dubbing stops when
- the video tape is played back to
the end and stops.
- recording space becomes full.
• The videos recorded from TV pro-
grams or movies can be used only
for your personal enjoyment without
permission of the copyright holder.
During dubbing, VCR playback, DVD recording and "dub" (dub-
bing) indicator appear on the display window.
DVD •
-RWVR / Jt
"xPm O U O
Video playback DVD recording
To stop dubbing, press STOP.
66
2K70101A E P64-69 86 _ 07.129, 3:58 PM