TOSHIBA (oltiffi llDil ill I I gyp gyp gyp DIGITAL AUDIO Rewritable Recordable DVD+ReWritable DVD+R DVD VIDEO RECORDER/VIDEO CASSEHE RECORDER D-VR610KU OWNER'S MANUAL dts RW Digital Out COMPATIBLE HSmi HIGH-DEFINITION MULTIMEDIA INTERFACE Owner's Record The model number and serial number are on the back of your DVD Recorder. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this DVD Recorder. Model number: |..................
PRECAUTIONS WARNING: L TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A A A A caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS This unit has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
Installation Location For safety and optimum performance of this unit: • Supplied Accessories remote control with batteries (AAx2) Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation.
PRECAUTIONS Maintenance Servicing______ Please refer to relevant topics on "TROUBLESHOOTING" on pages 102-105 before returning the product. If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative.
CONTENTS PRECAUTIONS...............................................................................2 FEATURES...................................................................................... 8 Symbols Used in this Owner's Manual.................................. 8 FUNCTIONAL OVERVIEW........................................................11 Installing the Batteries in the Remote Control....................12 Using a Remote Control.....................................................
comtMTi SPECIAL PLAYBACK...................................................................58 Resume Playback.................................................................58 Fast Forward / Fast Reverse Playback................................ 58 Skipping TV Commercials During Playback.........................58 Rapid Playback..................................................................... 59 Step by Step Playback..........................................................
FEATURES This unit not only plays back DVD, CD and cassette tape but also offers features for you to record on DVD/cassette tape and edit them after that. The following features are offered with this unit. Recording Setting or clearing chapter marks: You can set or clear chapter marks on titles. DVD mode | VCR mode This unit is compatible with recording on DVD-RW which is recordable repeatedly and DVD-R which accept the additional recordings until the disc becomes full but not overwritable.
Discs for Recording, Playing back DVD-R DVD-RW Disc type DVD+RW DVD+R 0VE> Logo DVD+ReWritable Format Automatically formatted in video mode Can be fornnatted in VR or video mode Video Mode Automatically formatted in +VR mode VR Mode Mdvd +RW Maximum record time Recordable/playable versions Compatibility Automatically formatted in +VR mode yMDVD 480 min (12cm) 144 min (8cm) 480 min (12cm) 144 min (8cm) 480 min (12cm) 144 min (8cm) Ver.1.1,1.2 Ver.1.1/2x CPRM compatible Ver.1.
is a trademark of DVD Format/Logo Licensing Corporation. • Official DivX'"' Certified product • Plays all versions of DivX® video (including DivX® 6) with standard playback of DivX® media files • Discs containing the DivX® files with the DivX® CMC (Global Motion Compensation) playback feature, which is DivX® supplemental function, cannot be played back on this unit. • This unit cannot play back the disc contents protected by Windows Media Digital Rights Management (DRM).
FUNCTIONAL OVERVIEW Front Panel 21 20 19 18 1716 15 14 13 12 11 109* 8 14. TRACKING \/ / buttons (VCR) 1.1/0 ON/STANDBY button (DVD/VCR) Press to adjust the tracking during playback or in slow motion of the cassette tape. While playback is in still mode, you can stabilize the picture. Press to turn on and off the unit. 2. Cassette compartment (VCR) Insert a cassette tape here. 3. 15. Display ^ OPEN/CLOSE button (DVD)* Refer to "FRONT PANEL DISPLAY GUIDE" on page 18.
OViílRemote Control Installing the Batteries in the Remote Using a Remote Control Install the batteries (AAx2) matching the polarity indicated inside battery compartment of the remote control. Open the cover. 1 Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
FUNCTIONAL OVERVIEW 1. INPUT SELECT -© button • Press to select the appropriate input. 2. OPEN/CLOSE ^ button DVD mode: • Press to open or close the disc tray. 18. TRACKING /\ / \/ buttons (VCR) • Press to adjust the tracking during playback or in slow motion of the cassette tape. • While playback is in still mode, you can stabilize the picture. VCR mode: 19. SAT.LINK button • Press to remove the cassette tape from the cassette compartment. 20. TIMER PROG, button 3.
NG d l E C O R D E R S SB Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with [VCR/DVD], DVD mode VCRmode Press [DVD] on the remote control. Press [VCR] on the remote control. (Verify that the DVD indicator is lit.) (Verify that the VCR indicator is lit.) DVD button VCR button Note I • You cannot switch to another mode (DVD or VCR) in the timer-standby mode.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference. On-Screen Display / Menu The on-screen display changes in the following order as you press [DISPLAY].
GUIDE TO ON-SCREEN DISPLAYS AND MENUS Title/File Name Information HDMI Information Title name information a® % Video Info/ : My Title Audio info. : File name information T My File ài MP3/WMA Tag Information *1. Indicates the resolution of the F^DMI output image. *2. Indicates the HDMI video format. • First, track name will be displayed. E!«aekN«t 4. Indicates current disc status. I ' If you press [DISPLAY] one more time, artist name will be displayed.
___GUIDE TO ON-SCREEN DiSPl AV< Ai'I'D Main Menu Press [SETUP] to display the main menu. Then use [A / ▼] to select a menu and press [ENTER] to display the menu. These menus provide entries to all main functions 1. General Setting: To go to general setting menu. 2. Tinner Programming: To program a timer recording. of the unit. 3. Title List: To call up the title list. 4. DVD Menu: To set up the DVD setting. 5. CD Playback Mode: To set up the CD playback setting.
NT PANEL DIS III PM D H OD VCR M DB H 49 DVD _ 0 0- n n- n U u- L( 0- 0 PM ‘ afternoon with the clock display. 2. Title / track and chapter mark D : Appears when indicating a title / track number. H : Appears when indicating a chapter number. 3. Current status of the unit II : Appears when playback is paused. ^ : Appears when playing back a disc. 53 : Appears when the timer programming or OTR has been set and is proceeding. : Flashes when all timer recordings have been finished.
CONNECTION TO AN EXTERNAL TU o c This section describes how to connect this unit to an external tuner such as cable/satellite box. • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information. o 3 Disconnect the power cords of the devices from the AC outlet. 1 Make the connection as illustrated below. e.g.
SETTINGS FOR THE VIDEO INPUT You must let the unit know which video input jack you are using before making a recording. □□□□□ Press [SETUP], 1 2 3 4 Use [a / T] to select "General Setting", then press [ENTER]. Use [a / T] to select "Video", then press [ENTER]. Use [a / T] to select "Select Video", then press [ENTER]. Use [▲ / T] to select the input jack 5 type to connect, then press [ENTER], If you want to use VIDEO IN jack, select "Video In".
CONNECTION TO A TV Make one of the following connections, depending on the capabilities of your existing device. VCR and basic DVD connection 3 VIDEO OUT ia :3 SS Available for DVD only analog audio 5 3 Method 1 Method 2 good picture better picture 33 PI C3 3 3:0 S-video cable * • S-VIDEO OUT VIDEO OUTPUT Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.
CONNEQION TO A TV WITH AN HDMr COMPATIBLE PORT A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) connector allows digital transfer of both digital video signals and multi-channel audio signals. Available for DVD only HDMI cable HDMI OUT this unit O When connecting with an HDMI cable, the audio signal will be output as the digital audio signal simultaneously, so you do not need the analog audio connection described on page 21. • Cables not included.
CONNECTION TO A TV WITH AN HOMI™ COMPATIBLE PORT O n. c o 3 Actual Output Modes by Media Audio recording format of the disc Dolby Digital DVD-video Dolby Digital setting of this unit Actual output PCM 2channel PCM Stream Dolby Digital PCM LPCM Dolby Digital DivX® MP3/MP2 2channel PCM Stream PCM 2channel PCM Stream Dolby Digital PCM Stream 2channel PCM For audio CD and MP3 / WMA files, 2 channel PCM will be output regardless of the "Dolby Digital" setting.
msn NNECTION TO AN AUDIO SYSTEM • When you change the connections, all devices should be turned off. • Refer to the owner's manual accompanying external devices for more information. 2 Channel Analog Audio Connection Digital Audio Connection stereo system Dolby Digital decoder ""MD deck or DAT deck can be also connected through coaxial jack. Please purchase the rest of the necessary cables at your local store.
INITIAL SETTIN ■■ Turn on this unit for the first time, you need to follow these steps. □□□□□ 1 2 Press [I/O ON/STANDBY]. Before: Turn the TV on. Select the input to which the unit is connected. Use [a / T] to select your desired language, then press [ENTER] to set language. 11 OSD Language English Franca ts Español TOSHIBA SE-R0295 3 Press [ENTER] to activate "Clock Setting". 4 Proceed to step 3 in "Clock Setting' on page 26.
SETTING THE CLOCK Set the clock before you try the timer programming. Clock Setting □□□□□ ■ @/: ABC DEF B S GHI JKL MNO PQRS TUV WXYZ Q SPACE SETUP 1 2 3 Press [SETUP] and use [a / T] to select "General Setting", then press [ENTER]. Use [a / T] to select "Clock", then press [ENTER]. "Clock" menu will appear. Use [a / T] to select calendar or time, then press [ENTER].
FORMATTING A DISC ^hoosingMtheJRecordin|^^m^^ When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD-i-RW will always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the desired mode. You can also manually format a DVD-RW once it has been used. Press [SETUP].
HmmmimG a disc If you are using a DVD-RW or DVD+RW, you can format the disc by performing "Format". You can format DVD-RW for either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc. Insert a recordable disc. 1 Press [SETUP]. 2 Use [A / T] to select "DVD Menu", then press [ENTER]. 3 Use [a / T] to select "Format", then press [ENTER]. I uenem^ng e.g.) VR mode DVD-RW Format SwMetOFFOOK 4 Use [A / T] to select "Start", then press [ENTER].
SETTING A DISC TO PROTECT To prevent accidental recording, editing or erasing the titles, you can protect them from "DVD Menu" menu. □□□□□ TOSHIBA SE-R0295 1 Press [SETUP]. 2 3 Use [▲ / T] to select "DVD Menu' then press [ENTER]. 4 Use [a / [ENTER]. Use [a / T] to select "Disc Protect OFF A ON", then press [ENTER]. e.g.) VR mode DVD-RW T] to select "Yes", then press This operation may take awhile to be completed.
PLAYING THE DISCS IN OTHER DVD PLAYERS Auto Finalizing You can finalize discs automatically using this function. You can use this function to finalize discs after finishing all timer recordings and at the end of the disc space. Press [SETUP] and use [a / T] to select "General Setting", then press [ENTER]. 1 "General Setting" menu will appear. 2 3 4 Use [a / ▼] to select "Recording'^ then press [ENTER]. "Recording" menu will appear. Use [A / T] to select "Auto Finalize" then press [ENTER].
Finalizing a Disc MDVDi^DVD You will need to finalize discs to play back on other DVD players. Finalizing may take several minutes up to an hour. Since the process of the finalization fills empty space of the disc, a shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. Press [SETUP]. 1 2 3 4 Use [a / T] to select "DVD Menu", then press [ENTER]. "DVD Menu" menu will appear.
Nate • Finalizing a disc in video mode and +VR mode automatically creates a title menu. • After you finalize the DVD+RW, you can call up the title list by pressing [TOP MENU], or you can call up the title menu by pressing [DISC MENU]. • Even after DVD+RW is finalized, you can still record or edit. After you finalize DVD-RW/-R or DVD+R, you cannot edit or record anything else on that disc. • If you insert a DVD-RW finalized with this unit, "Undo Finalization" will appear instead of "Finalize" at step 3.
INFORMATION ON DVD RECORDING Recording Mode You can select a recording mode among 5 options, and the recording time will depend on the recording mode you select as follows. Recording mode XP Recording time Video/ 8cm Sound Quality 60 min 18 min ☆ ☆ ☆ YVYY SP 120 min 36 min ☆ ☆ ☆ ☆ LP 240 min 72 min ☆ ☆ ☆ EP 360 min 108 min YYYV SLP 480 min 144 min • The recording times listed above are estimates and are for reference purposes only. Actual recording times may vary.
SETTINGS FOR A RECORDING Make Recording Compatible 1 Setting for Auto Chapter MDVD Use this feature to make the discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with "Make Recording Compatible" set to "ON", the title list is automatically converted to our style. 1) Press [SETUP] and use [A / T] to select "General Setting", then press [ENTER]. 2) Use [A / ▼] to select "Recording", then press [ENTER]. "Recording" menu will appear.
Recording Audio Select (XP) Setting Aspect Ratio for Video Mode ................... -......-...... . You can enjoy high quality sound recording. This function works only when the recording mode is set at XP. 1) Press [SETUP] and use [a / T] to select "General Setting", then press [ENTER], 2) Use [A / T] to select "Recording", then press [ENTER], "Recording" menu will appear. You can set aspect ratio for video mode recording.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs. 7T\ □□□□ Press [I/O ON/STANDBY]. 1 Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD]. 2 Press [OPEN/CLOSE to open the disc tray and insert your disc with its label facing up. Align the disc to the disc tray guide. 3 Press [OPEN/CLOSE to close the disc tray. It may take awhile to load the disc completely.
Press [REC •] to start recording. will be displayed for 5 seconds. Press [PAUSE II] to pause recording. Press [PAUSE 11] or [REC •] again to restart recording. 7 Press [STOP ■] to stop recording. The recorded title will be included in the title list. (Refer to “Guide to a Title List" on page 70.) This operation may take awhile to be completed. To set one-touch timer recording (OTR)... I This is a simple way to set the recording time in blocks of 30 minutes.
TIMER RECORDING rjmi rjm rsM nsm i Guide to Timer Programming Display You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure • Connect the external tuner to either LI or L2 and set it to output audio/video signals when it comes to the time you want to start recording. • Do not change the external tuner's channel while you are recording.
TIMER RECORDT 3 Use [a / press [►]. T] to enter the date, then 7 ci:> i the current date, the MON-SAT ...."LI date will change as MON-FRI e.g.) January 1st SP l>vp ; SP P r 1:00 Auto recording mode select... calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program. SUN ' ' "CSZ3 ,c --------sEsat Use [a / T / ◄ / ►] or [the Number buttons] to enter the start and end time, then press [^].
ill " ^ II1» I...II Checking, canceling, or correcting the timer programming information 1) Press [TIMER SET]. ^ If the tinier program did not complete correctly, the error number appears in the timer pro gramming list. 2) Press [TIMER PROG.]. 3) Check the information on the list you want to edit.
Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds., the clock setting and all timer programming will be lost. • If a disc is not inserted or if a inserted disc is not recordable (finalized DVD-RW/-R, finalized DVD+RW, a fully recorded disc, etc.), "DVD" on the front panel display flashes and timer recording cannot be performed. In some cases, 0 will appear momentarily around the start point as the unit attempts to record.
SATELLITE LINK You can set the unit to start recording whenever it detects the video signal from the external tuner. Preparing for the satellite link tinner recording: Preparation on the tuner • The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to output audio/video signals when it comes to the time you want to start recording, and stop output audio/ video signals when it comes to the time you want to finish recording.
6 7 Press [ENTER]. "To Standby Mode" is highlighted. Press [ENTER] again. In a second, the unit will be turned off automatically as it goes into the satellite link standby mode. To cancel the satellite link function while in the satellite link standby mode: Press [TIMER SET] to turn on the unit. To cancel the satellite link function while the satellite link recording is in progress: Press [BSTOP] or EJECT /■ STOP] on the front panel of the unit.
Connection to an External Device Connect the external device properly to the unit by using input jacks either L2 (Front) or LI (Rear). ................. When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front). Use S-video or the RCA audio/video cables for this connection. When connecting a DVC (digital video camcorder), use the DV input jack on the front panel instead of VIDEO IN jack. external device (camcorder, VCR etc.) L.... ...............................
Recording from an External Device Before recording from an external device, refer to the instructions for the connection on page 44. 1 2 Turn on the TV and press [I/O ON/STANDBY], and be sure to select the input of the TV to which the unit is connected. When you want to record to the disc; Press [DVD]. Press [OPEN/CLOSE ;^] to open the disc tray. Place the disc to record properly. Press [OPEN/CLOSE again to close the disc tray. It takes a while to load the disc.
V DUBBING Guide to DV and On-Screen Display This function helps you to easily dub the contents of the DVC (digital video camcorder) to this unit. You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is compliance with the IEEE1394 standards.
DVC to DVD Dubbing r~wrnsmrm^rssBnssL Before recording fronn DVC, see page 44 for connection instructions. 2 3 4 Press [REC MODE] to select a recording mode. (Refer to ''Recording Mode" on page 33 for DVD or "Recording" on page 99 for VCR.) Press [DISPLAY]. With "Control" highlighted, press [ENTER] to display the available devices to control with the remote control of this unit. Use [A / T] to select "DVC", then press [ENTER].
DVC to VCR Dubbing Repeat the steps 1 and 2 on page 47. Before recording from DVC, refer to page 44 for connection instructions. PAUSE IT 1 2 Press the PLAY button on your DVC to find where you wish to start dubbing. Then, press the PAUSE button on the DV camcorder when you come to the desired start point. 3 4 Press [REC •] to start recording. TOSHIBA Press [VCR] first. Preparing for DV to VCR dubbing: • Insert a recordable cassette tape and make sure your DVC is in video mode.
DVD/VCR DUBBING You can copy a DVD to a cassette tape or copy a cassette tape to a DVD. This function will be possible only if the DVD or the cassette tape is not copy protected. Before starting this function, prepare for the recording on the DVD-RW/-R or the cassette tape. Refer to pages 33 and 99. Make sure: • Insert a recordable disc and a cassette tape with an erase-protection tab. Note for recording to a cassette tape: • The cassette tape's erase-protection tab is intact.
4 5 6 7 8 9 Use [A / T] to select "VCR A DVD", then press [ENTER]. - General Setting 4 Use [A / ▼] to select "DVD # VCR", then press [ENTER]. Dubbing Mode Dubbing Mode fig VCR -* DVD □ DVD -* VCR □ VCR t DVD fig DVD -» VCR Press [SETUP] to exit. Press [VCR]. Press [PLAY ►]. Then press [PAUSE 11] at the point you wish to start recording. • Since it takes about a few seconds before the actual dubbing begins, please allow extra 5 seconds when selecting the starting point. Press [DVD].
Structure of Disc Contents The contents of DVD are generally divided into titles, and the titles are subdivided into chapters. Audio CDs are divided into tracks. Data disc contains MPS/WMA/JPEG/DivX® are divided into folders, and the folders are subdivided into files. DVD video - Title 1 Chapter 1 Chapter 2 1 ...I___ Title: - Title 2 Chapter 1 Chapter2 Chapters 1 1___ Chapter: Track: Folder: Divided contents of a DVD video. Roughly corresponds to a story title in short stories.
BASIC PLAYBACK Direct Playback 1 2 Press [I/O ON/STANDBY]. Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD]. Press [OPEN/CLOSE to open the disc tray and insert your disc with its label facing up. Align the disc to the disc tray guide. I Note I • Some discs may start playback automatically. 52 EN 3 Press [OPEN/CLOSE to close the disc tray. 4 5 Press [PLAY ►] to start playback. it may take awhile to load the disc completely.
Playback from the Title List 2 Press [OPEN/CLOSE to open the disc tray and insert your disc with its label facing up. l/(!> Align the disc to the disc tray guide. 3 4 Press [OPEN/CLOSE to close the disc tray. It may take awhile to load the disc completely. Press [TOP MENU]. Title list will appear. Press [DISC MENU] to switch Original/Playlist if necessary. • To exit the title list, press [STOP ■]. • To resume the title list, press [TOP MENU].
Playing Back an Audio CD and a CD-RW/-R with MP3/WMA/JPEG Files When selecting track/file: Playback will start. When selecting folder: The files in the folder will appear. Use [ A / T] to select the file or folder you want to play back, then press [ENTER]. • Press [PLAY^], [ENTER] or [►] to move to any lower hierarchies. • Press [◄] or [RETURN] to move back to the previous hierarchy. Hints for audio CD tracks and MP3 / WMA / JPEG files: • Folders are shown by • Audio CD tracks are shown by W.
Pia^fi^ Back a DivX* □□□□□ 1 2 Follow steps 1 to 2 in "Direct Playback" on page 52. Press [OPEN/CLOSE to close the disc tray. It may take awhile to load the disc completely. File list will appear automatically. • To exit the file list, press [STOP ■]. • To resume the file list, press [TOP MENU]. 3 Use [a / T] to select the desired folder or file, then press [ENTER]. lotse HAMg When selecting file: Playback will start. When selecting folder: The files in the folder will appear.
It is recommended that files to be played back in this unit are recorded under the following specifications: Official DivX® Certified product • Playable codec of AVI files : DivX 3.x, DivX®4.x, DivX®5.x, DivX®6.
BASIC PLAYBACK. Using the Title/Disc Menu Pause Press [DVD] first. rmrzmrmrimsrm 1) DVD may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. During playback, press [PAUSE 11]. Playback will be paused and sound will be muted. Press [DVD] first. 1) Press [TOP MENU] or [DISC MENU] to call up the title list or disc menu. 2) Use [a / T / ◄ / ►] to make a selection, and then press [ENTER] to enable your selection.
Resume Playback Skipping TV Commercials During ....... —........................................................... You can play back from where you stopped playing back the disc last. ^^EOMOD Press [DVD] first. 1) During playback, press [STOPHj. The resume message will appear. You can skip TV commercials to enjoy the recorded programs without interrupting. Press [DVD] first. 2)Press [PLAY^]. In a few seconds, playback will resume from the point at which it stopped last.
Rapid Playback Slow Forward / Slow Reverse Playback Rapid playback function is available only during playback. This function is available only on discs recorded in the Dolby Digital format, and plays back in a slightly faster/ slower speed while keeping the sound output. Press [DVD] first. 1) Press [DVD] first. 1) During playback, press [1.3X / 0.8X PLAY]. ► xO.8 : Press [1.3X / 0.8X PLAY] once during playback. Plays back approximately at 0.8 times of normal playback. ► xl .3: Press [1.3X / 0.
'•■PECfAL PIAY8AO' Zoom Marker Settinr Press [DVD] first. 1) During playback, press [DISPLAY] or [ZOOM]. • If you press [ZOOM], skip to step3. This feature allows you to assign a specific point on a disc to be called back later. Press [DVD] first. • For audio CD, skip to step 2. 2) Use [◄ / ►] to select ^, then press [ENTER] within 1 second, or wait for 1 second to display the selection menu. e.g.) DVD-video y -V V S J 9 1) During playback, press [DISPLAY].
Chasing Playback during Recording You can play back the already recorded part of the currently recording program without waiting for the recording to the end. This function works from 1 minute after the start of the recording. 1)During recording, press [PLAY^]. Playback will start from the beginning of the program that you are currently recording. Screen for the current playback: Using [TIME SLIP]...
Simultaneous Playback and Recording You can also play back a recorded title during current recording or the timer recording on the same disc. 3) Press [STOP ■] once to stop playback. The resume message will appear. Screen for the current recording: 1) During recording, press [DISPLAY]. Screen for the current recording: J 3J J, E3 Ea LTH L1 3 J 1 J li23i4S • Resume ON 2) Select icon using [◄ The title number next to /►], then press [ENTER]. will be highlighted.
SEARCH Title/Chapter Search o a. _ Truck Search .................................................................................................................................... o 3 PEG|^)ivX^ Using [SKIP 1 -^ ] / [SKIP ] Using [SKIP ] / [SKIP ] Press [DVD] first. Press [DVD] first. 1) 1) During playback, press [SKIP ] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time.
SEARCH Tíme Search ■roa \E¡ Press [DVD] first. • For audio CD, skip to step 2. 1) During playback, press [DISPLAY]. 2 )Use [◄/►] to select , then press [ENTER]. e.g.) DVD-video e.g.) audio CD The number next to 0 will be highlighted. To move to the number next to ^, press [►]. When time search is not available, m and time counter are not displayed. 3) Use [A /▼/◄/►] or [the Number buttons] to enter a desired time to search, then press [ENTER]. After the search, playback will start automatically.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW 3 o Title: Repeat Playback The current title will be played back repeatedly. Available repeat function may vary depending the discs. Press [DVD] first. Chapter: The current chapter will be played back repeatedly. All: • For audio CD, MP3, or WMA, skip to step 2, or press [REPEAT] and skip to step 3. 1) During playback, press [DISPLAY] or [REPEAT]. • If you press [REPEAT], skip to step3.
REPEAT/RANDOM/PROGRAIVI PLAYBACK/SÜDE SHOW Prc^ram Playback Slide Show z You can program the disc to play back in your desired order. You can select the display time between 5 seconds and 10 seconds. Press [DVD] first. Press [DVD] first. 1) Press [SETUP] in stop mode. 1) Follow steps 1 and 2 in "Program Playback" on the left. 2) Use [ A / ▼] to select "CD Playback Mode", then press [ENTER]. "CD Playback Mode" menu will appear. 2) Use [▲ / ▼] to select "Slide Show", then press [ENTER].
SELECTING THE FORMAT OF AUDIO AND VIDEO o. You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles ^witehin^udioSoi^ DVD-video may have subtitles in one or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages during playback.
. SELECTING THE FORMAT OF AUDIO AND VIDEO IwitchinayirtH^ljurround .................. ^^Swtchm^Can^^ Some DVD-video have scenes shot from two or more angles. Angle information should be on the disc case if You can enjoy stereophonic virtual space through your existing 2 channel stereo system. Press [DVD] first. the disc contains multi-angle scenes. Press [DVD] first. 1) During playback, press [DISPLAY]. • For audio CD, MP3 or WMA, skip to step 2. 2) Use [/ ►] to select Q, then press [ENTER].
SELECTING THE FORMAT OF AUDIO AND VIDEO Adjusting Black Level D You can adjust the black level to control the brightness of the picture in order to get a better picture. 1) During playback, press [DISPLAY]. 2) Use [ ^ / ►] to select H3|. Press [ENTER] within 1 second, or wait for 1 second to display the selection menu. e.g.) DVD-video rr rc : mm : :s : i:w : -■ i ; y::t i ry 3)Use [A / T] to select "Black Level", then press [ENTER]. mm Black Uvei 4) Use [A / ▼] to select "ON", then press [ENTER].
INFORMATION ON DISC EDITING Editino Di Guide to a Title List Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [TOP MENU]. Edit the recorded disc You will find editing discs Is easy. This unit offers convenient edit functions which are possible only with DVD-RW/-R and DVD+RW/+R. You can edit the following from a title list.
DELETING TITLE Notes for deleting titles After the disc is fully recorded: DVD-R/DVD+R DVD-RW/DVD+RW When a title is deleted from DVD-RW in VR mode, the recordable disc space will be increased. The Full-Recorded disc When the last title is deleted from DVD-RW in video mode or DVD+RW, the recordable space will be increased. When a title is deleted from DVD-R and DVD+R, the recordable space will NOT be increased.
y-mijvrass You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back to the disc. 1 Be sure to read “Notes for deleting titles" on page 71 before you delete the title. Press [DVD]. In stop mode, press [TOP MENU]. Title list, original or playlist will appear. • For VR mode DVD-RW, press [DISC MENU] to switch between "Original" and "Playlist". 2 Use [a / ▼/◄ / ►] to select a desired title, then press [ENTER].
CREATING/DELETING PLAYLIST Adding Titles to a Playlist L For VR mode DVD-RW, you can create the playlist as you wish. You can add up to 99 titles to a playlist (as long as the total number of the playlist does not exceed 999 chapters). 1 Follow the step 1 in "DELETING TITLES" on page 72 to display the original. 2 Use [a / / ►] to select the desired title, then press [ENTER]. 3 Use [a / T] to select "Add To Playlist", then press [ENTER].
5 -ATiNG/DELETlNG PLAYLIST Erasing All Playlist Press [DVD]. Press [SETUP]. A playlist can be deleted if it is no longer needed. 1 Main menu will appear. 2 Use [a / T] to select "DVD Menu", then press [ENTER]. 3 Use [A / T] to select "Delete All Playlists", then press [ENTER]. 4 Use [A / T] to select "Yes", then press [ENTER]. Use [A / T] to select "Yes" and then press [ENTER]. Data will be written onto the disc momentarily.
EDITING DISCS ing Names on Titles You can put a name on the disc and change it from this menu. •ISC MENU 4 Use [a / T] to select "Edit Title Name", then press [ENTER]. TOP MENI 5 To enter a title name, follow the steps of "Guide to Edit Title Name'‘ on page 76. IZED character set TOSHIBA SE-R0295 area for entering title names When you finish entering a title name, press Press [DVD]. [ENTER]. In stop mode, press [TOP MENU]. 1 Title list, original or playlist will appear.
....... ..... ..... ....... EDITING DISCS Putting Names on Titles (cont'd) Guide to Edit Title Name 1) Use [a / T] to select a desired character set, then press [ENTER]. □□□□□ 2) Follow the list below, use [the Number buttons] repeatedly until the desired letter appears. ABC DEF s^elect 1 IT Q GHI MNO QSQ PQRS TUV WXYZ QS SPACE Pr ABC I abc 123 I @!? 0 a.
EDITING DISCS Setting Oiagt er Marks You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. 1 Follow steps 1 to 3 in "Putting Names on Titles" on page 75 to display "Edit" menu. 2 Use [a / T] to select "Chapter Mark", then press [ENTER]. 3 Use [SKIP [◄◄/►►I], [REV ◄◄], [FWD ►►], [PLAY ►] and [PAUSE 11] to find the point where you will create a new chapter mark. Or, use [SKIP / ►►!] to find a chapter mark that you wish to delete.
Hiding Chapters m Use [A / ▼/◄ / ►] to select a desired title, then press [ENTER]. You can hide chapters from the title list. Hidden chapters are skipped during playback. 3 Use [▲ / T] to select "Edit", then press [ENTER]. 4 5 Use [▲ / T] to select "Hide Chapter", then press [ENTER]. Submenu will appear. Use [SKIP or [SKIP ►►!] to decide the chapter to be hidden. Use [a / ▼] to select "Hidden", then press [ENTER]. Press [DVD]. In stop mode, press [TOP MENU]. 1 Title list will appear.
EDITING DISCS isaaEssat O a. £ a Title You can delete a specific part of a title. Even when parts of title are deleted from the playlist, the original title will remain as it is. 1 Follow the steps 1 to 3 in "Putting Names on Titles" on page 75 to display "Edit" menu. A O □ □ m n : o’ 3 2 Use [a / ▼] to select "Scene Delete", then press [ENTER]. e.g.) VR mode DVD-RW playlist.
EDITING DISCS mm 3 Use [▲ / ▼] to select ‘ ’Delete" then press [ENTER]. Use [SKIP !◄◄/►►!], [REV ◄◄], [FWD ►►], [PLAY ►] and [PAUSE 11] to find the start point, then press [ENTER]. Then use [SKIP / ►►!], [REV ◄◄], [FWD ►>], [PLAY ►] and [PAUSE 11] again to move to the end point, and press [ENTER]. 5 Use [A / ▼] to select "Yes" then press [ENTER]. "Are you sure?" will appear. Select "Yes" using [A /▼] and then press [ENTER]. The part of the title is deleted. The cursor will move to "Preview".
EDITING DISCS Dividing a Title o 3 3 You can divide one title into two new titles. Use [A / T] to select "Edit", then press [ENTER]. e.g.) VR mode DVD-RW playlist o 3 a vn 4 5 Use [SKIP !◄◄], [SKIP ►►!], [REV ◄◄], [FWD ►>], [PAUSE 11] and [PLAY ►] to decide the point at which you will divide the title. |g Use [a / T] to select "Title Dividing", then press [ENTER]. 13 Use [a / T] to select "Yes", then press [ENTER]. o a e.g.
Combining Titles You can combine two titles into a single title. □□□□□ 1 2 Follow the steps 1 to 3 in "Dividing a Title" on page 81 to display "Edit" menu. Use [A / T] to select "Title Combining", then press [ENTER]. Title combining setting window will appear. Selected title grays out, and the frame of the next title becomes yellow. 3 Use [A / T/ ◄/ ►] to select another title to combine, then press [ENTER]. Selection menu will appear. Use [a / T] to select "Yes", then press [ENTER].
jet^9 or Releasing the Title Protection To prevent the accidental editing, or erasing of the titles, you can protect them in "Edit" menu. You can cancel the title protection feature after it is applied. 1 2 Follow the steps 1 to 3 in "Putting Names on Titles" on page 75 to display "Edit" menu. Use [A / T] to select "Protect", then press [ENTER]. • If the title is protected, [t] icon will appear in the original list. 3 Confirm the indication "OFF ON". Press [ENTER] again.
mmuG Dfs For titles in video mode DVD, you can set or edit chapter at every time interval. You can clear the chapter mark too. You can specify the interval of chapter marks for titles last more than 5 minutes. 1 2 Follow the steps 1 to 3 in "Putting Names on Titles" on page 75 to display "Edit" menu. Use [a / T] to select "Chapter Mark" then press [ENTER]. Use [a / T] to select the desired interval, then press [ENTER]. liisaJ TOSHIBA 4 5 Use [a / [ENTER].
LIST OF THE DEFAULT SETTINGS The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Items (highlight is the default) Playback Parental Lock -> page 88 Audio Out page 89 Dynamic Range Control n Compressing the range of sound volume. ON OFF P.CM Display Set the parental level for DVD playback. OFF level 8 [Adult] to I 1 [Kid Safe] 96kHz Set whether the sound recorded in 96kHz will be down sampled in 48kHz.
LIST OF THE DEFAULT SETTIN I Items (highlight is the default) Display V-Chip Canadian English Rating page 92 18+ 14+ PG G C8+ C Change Password -> page 93 Video Change the password. Progressive -> page 94 ON OFF Set to the progressive scan mode (set to "ON") or to the interlace scan mode (set to "OFF"). TV Aspect -> page 94 4:3 Letter Box i 4:3 Pan & Scan 16:9 Wide Set a picture size according to aspect ratio of your TV. Video In Set the video input type for the external input.
GENERAL SETTING Pl^back Press [STOP ■] if you are playing back a disc. Press [SETUP] and use [ a / T] to □□□□□ select "General Setting", then press 1 [ENTER]. 2 press [ENTER]. 3 then press [ENTER]. Use [a / T] to select "Playback", then Use [A / T] to select a desired item, Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angie toon SfWMode Subnnenu will appear. TOSHIBA SE-R0295 4 5 Refer pn to in on pages 88 to 90 and set the selected item.
! - -,f %J Playback (cont'd) Mi Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from . viewing inappropriate material. A IfCll A password has not been set yet. Use [A / ▼] to select "Yes", then press [ENTER]. Use [the Number buttons] to enter a new password except for 4737, then press [ENTER].
^la^bacMcon£^ C~| Settings for Dolby Digital (Default : Stream) Audio Out Choose the appropriate audio setting for your external device. Use [A / ▼] to select a setting, then press [ENTER]. It will only affect a disc playback. Penerai Setting Use [A / T] to select a desired item, then press [ENTER]. Pia/;,>acK Display Video 1 Recording Clock DivX HDMI Reset All penerai Setting Playback Display Video Recording Clock DivX HOMI 1 Parental Lock 1 M Dynamic Range Control i ■■ " H r - ^ .............
Playback (cont'd) \i Disc Menu Language (Default: English) I Set the language for disc menu. Use [ A / T r] t‘ o ^ 1 select a language, then press [ENTER]. F QentNiM Setllttg Hü*-«- ■ ................ Note ; • Only the languages supported by the disc cah be selected. • Audio language setting may not be available to : some discs. ^10 k Disc Menu language • You can also change or switch off the subtitles on a DVD from the disc menu if it is available.
m OSD Language (Default: English) Set the language for the on-screen display. Use [A / T] to select a language, then press [ENTER]. / ' Generai Setting Playback I Display Video Clock Di¥X HOMi OSD Language lü English □ Français □ Esparkrt Reset All Your setting will be activated. y Screen Saver (Default : 10 minutes) Set the time to activate the screen saver function on the TV screen. Use [A / ▼] to select a setting, then press [ENTER].
Display (cont'd) a V-Chip MPAA Rating \M With the v-chip system in this unit, you can set the viewing limitation for the analog TV programs received from the external tuner or recorded on DVDs to prevent your children from watching inappropriate programs. If the unit detects a blocked program, a restriction message appears and you are not allowed to view the program. And be noted that the recorded contents on the cassette tape are not blocked.
TTINC Display (cont'd) a [Canadian English Rating] Rating Category 18+ Adult audience only 14+ Unsuitable for ages under 14 PG Parental guidance suggested G General audience C8+ For children over 8 C For all children E Exempt program higher \ 1 f lower As for TV Rating's TV-MA, TV-14, TV-PG, or TV-Y7, you can further set the sub ratings to block specific elements of programming.
GENERAI SETTiWG Video [ül Progressive (Default: OFF) This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to "ON". 1) Use [A / T] to select "ON", then press [ENTER].
trpipp « r% \ DivX® 3 □I Use [ a / T] to select a desired item, then press [ENTER]. DivXRVOD DivX Subtitle DivX® VOD This unit allows you to play back the files purchased or rented from DivX® VOD (video-on-demand) services. The files are available on the internet. When you purchase or rent DivX® VOD files on the Internet, you will be asked to enter an activation/registration code. This menu item provides you with the activation/registration code.
GENERAL SETTING HOMI 1 2 Press [SETUP] in stop mode and use [ a / T] to select "General Setting", then press [ENTER], Use [A / T] to select "HDMI", then press [ENTER], HUMI • You cannot select HDMI when an HDMI cable is not connected and the item is shown in grey color. 3 Use [ a / ▼ ] to select a desired item, then press [ENTER], Format HMA ik S o RGBF 4 o When you finish with the setting, press [SETUP] to exit. Format (Default: RGB) You can select the color space for HDMI output.
GENERÄLSETTING Jjgj a HOMI Audio (Default : ON) If you do not want to output the audio through HDMI (when you digitally output the audio through the COAXIAL DIGITAL AUDIO OUT jack to your audio system, etc.), you can set the HDMI audio output off. Use [A / ▼] to select a setting, then press [ENTER]. • Set to "OFF" when the HDMI sound is not output. Playtek Dispiay m m *>«♦ c XI m 3 Your setting will be activated.
:R# AI. SETTiWC Reset All Reset the setting to default. 1 Press [SETUP] in stop mode and use [▲ / ▼ ] to select "General Setting", then press [ENTER]. □□□□□ 2 Use [a / ▼ ] to select "Reset AH", then press [ENTER]. Ptaybask Display Video Clock OivX HDM( Reset All 3 Select "Yes" using [a / ▼] [ENTER]. Playback Display p , , Reset k»feck)ry default? Clock DivX Yes HDW Reset Ail i "Are you sure?" will appear. Select "Yes" using [A / T] and then press [ENTER]. Your setting will be initialized.
VCR FUNCTIONS Recording ^VHS 1) Press [I/O ON/STANDBY] on the remote control or the front panel of the unit. When you are playing back a cassette tape, turn on the TV and be sure to select the input to which the unit is connected. Press [VCR]. 2) Insert a prerecorded cassette tape. Press [PLAY to begin playback. 3) During playback, press [PAUSE 11]. Playback will pause and sound will be muted. Press [VCR] first.
VCR FUNCTIONS One-touch Tinier wBwor«lina(QTB) ln< This feature allows you to set the recording length simply by pressing [REC •] on the remote control. An index mark will be assigned at the beginning of each recording you make. You may skip to a specific marked point by following the steps below. Press [VCR] first. 1) During normal recording, press [REC •] to begin the one-touch timer recording. You can select a fixed recording time by pressing [REC •] repeatedly.
VCR FUNCTIONS Time Search This feature allows you to go to a specific point on a cassette tape by entering the exact amount of time you wish to skip in order to reach the point. Press [VCR] first. 1) Press [SEARCH] repeatedly so that "TIME SEARCH" menu appears. 2) Using [the Number buttons], enter your desired time to skip within 30 seconds. You can set the time up to 9:59. Press [VCR] first. Fast forward: When the unit is in stop mode, press [FWD ►►] to fast forward the cassette tape.
TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom 1 Remedy The power does not turn on. • Check that the AC power cord is connected securely. • Check the breaker (in case of power failure). • Press [TIMER SET] to cancel the timer standby mode. There is no picture.
Symptom 1 Remedy DV signal cannot be input. • Before connection, turn on the power supplies for both this unit and the DVC, and make sure that these units are in stop mode. • Only a "DVC-SD" signal can be input from the DVC to this unit. Other types of signals are not supported. • Do not connect any device other than the DVC. Even if a recorder or PC with another DV terminal is connected, the DV function will not operate.
. ' V i •' :: ■> i-i OOTI MCi ' I Symptom Remedy The subtitle language cannot be changed or turned off. • Multilingual subtitle are not recorded on the DVD-video. The angles cannot be changed. • Multi-angles are not recorded on the DVD-video being played back. •The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up. •The DVD-video prohibits changing angles.
TROUBLESHOOTiNG 1 Error message 1 Disc Error — Please eject the disc. — Playback feature may not be available on this disc. 1 Cause 1 • Unplayable disc is inserted in the unit. • The disc is upside down. 1 Solution • Insert the standardized disc which have the marks on pages 9-10. • Insert the disc with the labeled side facing up. Region Error — Please eject the disc. — Playback is not authorized in your region. • Parental Lock On The current selected parental level prohibits playback.
LANGUAGE CODE 1 Language 1 Code ■H Language 1 Code H H Language 1 Code Abkhazian 4748 Hungarian 5467 Russian Afar 4747 Icelandic 5565 Samoan 6559 Afrikaans 4752 Indonesian 5560 Sangho 6553 Albanian 6563 Interlingua 5547 Sanskrit 6547 Amharic 4759 Interlingue 5551 Scots Gaelic 5350 Arabic 4764 Inupiak 5557 Serbian 6564 Armenian 5471 Irish 5347 Serbo-Croatian 6554 Assamese 4765 Italian 5566 Sesotho 6566 Aymara 4771 Japanese 5647 Setswana 6660 Azerbaijan
GLOSSAR I Analog Audio PCM (pulse code modulation) An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also "Digital Audio". The most common system of encoding digital audio, found on CD and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio.
SPECIFICATIONS • This model complies with the below specifications. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future. General I System DVD-RW/-R, DVD+RW/+R, DVD-video, CD-DA, CD-RW/-R, VHS cassette tape VCR video heads Four heads Power requirements AC 120 V, 60 Hz Power consumption 30 W (standby; 3.3 W) Weight 9.5 lbs (4.3 kg ) Dimensions (width x height x depth) 17.2" X 4.
LIMITED WARRANTY Limited United States Warranty Digital Audio Video (“DAV”) Product - Exchange Warranty Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A.
Limited Canadian Warranty For Toshiba Brand Digital Audio/Video Products Toshiba of Canada Limited ("TCL") makes the following limited warranties to original consumers in Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TOSHIBA BRAND DIGITAL AUDIO/VIDEO PRODUCT (the "DAV PRODUCT(S)" or "DAV Product(s)") AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
IF THE DAV PRODUCT FAILS TO WORK AS WARRANTED ABOVE, YOUR SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE DEFECTIVE PART IN NO EVENT WILL TCL, TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs OR ASPs (THE ■■ RELATED PARTIES") BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES. MONEY REIMBURSEMENT COSTS OR EXPENSES.
TOSHIBA Printed in China 1VMN24593 / E9KGAUD^^^^^
DVD VIDEO RECORDER / VIDEO CASSETTE RECORDER D-VR610KU Be sure to read the Safety Precautions in the Owner's Manual carefully before using this unit. Connections • RCA audio cable (L/R) X 1 • RCA video cable x 1 HDMI, DV, S-Video and RF coaxial cables are commercially available.
VCR and basic DVD connection if VIDEO OUT Available for DVD only 1) Make one of the following connections, depending on the capabilities of your display device. analog audio (AUDIO OUT (DVD)) good picture (S-VIDEO OUT) better picture (COMPONENT VIDEO OUT) 2) Plug in the power cords of the devices to the AC outlet. OR HDMI Connection (Available for DVD only) 1) Before turning on any equipment, connect this unit to your TV.
'■’4 Initial Setting f You need to follow these steps when you turn on this unit for the first time. Press [I/O ON/STANDBY]. Before: □□□□ Turn the TV on. Select the input to which the unit is connected. Use [▲ / T] to select your desired language, then press [ENTER] to set language. [iInitialSeitetg ■ :j OSOtan^K^ English 'Wirtgtfi' Español t.SsÆ.«» SKIP PLAY TfWeSjJ □ D □ FÍWI3 (b ¿.....
DVD Recording *Make sure the external tuner is connected to LI or L2 input. □□□□ E Ш □ s Press [DVD]. 0 ABC D€F Ш Ш Ш H JKL MI40 [raasffl ШвШЫ ШШШa ill a asPLAV диою POftS TUV ШП 5ATU4K sctjp □ □0 A ((f(ENTCHTl j) » I (Э о CLEAR /'RETUHN Press [OPEN/CLOSE to open the disc tray and insert your disc with its label facing up. This unit can record to DVD-RW, DVD-R, DVD+RW and DVD+R. DVD-R and DVD+R can only be recorded to once. DVD-RW and DVD+RW can be recorded to and erased many times.
STOP Need Help? PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE If you are experiencing a technical problem or have questions regarding operation, authorized service centers, warranty or parts contact our Customer Service Department at: 1-800-631-3811 For DVD inquiries, including TV/DVD combos, DVD/VCR combos, TV/VCR/DVD combos, DVD Changers and DVD Home Theater Systems please call: 1-866-583-7353 For DVD recorders, including DVD/Tivo, please call: 1-800-319-6684 Mon. - Fri. 10:00 a.m. to 7:00 p.m.