I TOSHIBA DV&>. DV&>. ~ [illD~i [Q]o~i ~DD§~ ,.maGl v RW IDE 0 R4.7 DIGITAL AUDIO IReWritablel DVD+ReWritable DVO+R DVD VIDEO RECORDER /VIDEO CASSETTE RECORDER D-VR610KU OWNER1S MANUAL •• l!EIrn RECORDING Owner' 5 Record The model number and serial number are on th of your DVD Recorder. Record these numbers in t below. Refer to these numbers whenever you communicate with your Toshiba dealer about this DVD Recorder.
PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 1-----------------------1 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute arisk of electric shock to persons. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
IMPORTANT SAFETY INSTRUCTIONS This unit has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
Installation Location For safety and optimum performance of this unit: Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit.
Maintenance Servicing Please refer to relevant topics on 'TROUBLESHOOTING" on pages 102-105 before returning the product. • If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative.
CONTENTS f!~£or~!:~f;! !nttoduction PRECAUTIONS FEATURES Symbols Used in this Owner's Manual FUNCTIONAL OVERVIEW Installing the Batteries in the Remote Control Using a Remote Control THE VCR I DVD RECORDER SWiTCHING GUIDE TO ON-SCREEN DISPLAYS AND MENUS On-Screen Display / Menu Main Menu FRONT PANEL DISPLAY GUiDE 2 8 8 11 12 12 14 15 15 17 18 (or-nections -CONNECTION TO AN EXTERNAL TUNER SETTINGS FOR THE VIDEO INPUT CONNECTION TO A TV CONNECTION TO A TV WITH AN HDMI'" COMPATIBLE PORT CONNECTION TO AN A
SPECIAL PLAYBACK . .......•.................... 58 Resume Playback Fast Forward / Fast Reverse Playback Skipping TV Commercials During Playback Rapid Playback Step by Step Playback Slow Forward / Slow Reverse Playback Zoom Marker Setting Chasing Playback during Recording Simultaneous Playback and Recording SEARCH .....•..................................
FEATURES This unit not only plays back DVD, CD and cassette tape but also offers features for you to record on DVD/cassette tape and edit them after that. The following features are offered with this unit. Recording ,.V; .i, ,ftIt M1'%3;1 I,t." fj This unit is compatible with recording on DVD-RW which is recordable repeatedly and DVD-R which accept the additional recordings until the disc becomes full but not overwritable. Also, this unit allows you to record to the cassette tape.
FEATURES Playlist I Original .I .I .I .I .I .I .I .I .I .I .I ,..n ~ ~ ; i..t"" , ''r1 .I r:: .I 'U .I .I .I <: ...., .I .I :A' .I .I - -.. ;..; .I ::; .I ./: Available Gray: Not available *CPRM compatible disc only.
FEATURES dl COMPIlCT lfuD~~ rillDo~~ ~ DllilTALAUDlO ~~ Recording/Playing back VCR Icon Media ~ CD-RW/-R CD-RW/-R CD-RW/-R is a trademark of DVD Format/Logo Licensing Corporation. • Official DivX" Certified product • Plays all versions of DivX@ video (including DivX@ 6) with standard playback of DivX'" media files • Discs containing the DivX" files with the DivX" GMC (Global Motion Compensation) playback feature, which is DivX" supplemental function, cannot be played back on this unit.
FUNCTIONAL OVERVIEW Front Panel 2 e =I =<= . - ... - 3* ..~:~ ::::z::::x:=::c: =-==:z===:=c:::: =====-~-----~----------- 5 4 .~ 6 7 _.. _.~~ -:::::::r-=- =~- "~--=-~-I --_--=====-_-_=---:;-~I1=====~=,J~ =- == -_--=.==---=_-_--:::::-.:::-_-__ 21 20 19 18 1716 15 1.1/0 ON/STANDBY button (DVDIVCR) Press to turn on and off the unit. 2. Cassette compartment (VCR) Insert a cassette tape here. 3. ~ OPEN/CLOSE button (DVD)* Press to open or close the disc tray. 4.
J F NCTiONAlOVERVIEW Remote Control Installing the Batteries in the Remote Install the batteries (AAx2) matching the polarity indicated inside battery compartment of the remote control. Open the cover. 1 2 Insert batteries. Keep in mind the following when using the remote control: Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
FUNCTIONAL OVERVIEW 1. INPUT SELECT -E> button • Press to select the appropriate input. 2. OPEN/CLOSE ~ button DVDmode: • Press to open or close the disc tray. VCR mode: • Press to remove the cassette tape from the cassette compartment. 3. Number/Character buttons • Press to enter values for the settings in the main menu. DVDmode: • Press to select a title/chapter/tracklfile on display. • Press to enter title names. VCR mode: • Press to start the index/time search. 4.
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with [VCR/DVDj. Press [DVDj on the remote control. (Verify that the DVD indicator is lit.) Press [VCRj on the remote control. (Verify that the VCR indicator is lit.
This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS Title/File Name Information HDMllnformation Title name information File name information I~l-·-"·N I MyAIo MP3/WMA Tag Information • First, track name will be displayed. IF rmmul Y" • • If you press [DISPLAY] one more time, artist name will be displayed. _I I~K~ii·""'"'ii~., • • If you press [DISPLAY] one more time, album name will be displayed. 1-~-MoIIi-~-_----'---'·-~l't;-"' . -...~-...>-....
GUIDE TO ON-SCREEN 01 Press [SETUP] to display the main menu. Then use [A , .... ] to select a menu and press [ENTER] to display the menu. These menus provide entries to all main functions of the unit. 1. General Setting: To go to general setting menu. 2. Timer Programming: To program a timer recording. 3. Title List: To call up the title list. 4.DVDMenu: To set up the DVD setting. 5. CD Playback Mode: To set up the CD playback setting .
2 1 I PM ii ~ ~ ~vCRI t r n DB --"I n n· n n· -0 O· Cr O· 0 3 Cr~ 4 D :Appears when this unit is in 1. PM : Appears in the afternoon with the clock display. 2. Title I track and chapter mark Iii : Appears when indicating a title / track number. [!) : Appears when indicating a chapter number. 3. Current status of the unit II : Appears when playback is paused. DVD output mode. : Appears when the timer recording is proceeding in DVD. : Appears when DVD is in the timer recording standby mode.
11:1 .. , 18I ... This section describes how to connect this unit to an external tuner such as cable/satellite box. • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information. 1 Disconnect the power cords of the devices from the AC outlet. 2 Make the connection as illustrated below. e.g.) I ~. 1_:1_ r;- rear of your TV I ~. I~ •••••••• TV signal I.§ l _ 1------- I~ IllJo 1 10 _. I(l)~ '3 I~ L:.
• INPUT You must let the unit know which video input jack you are using before making a recording. 1 2 3 4 5 SETUP W"':'l ~ ... Press [SETUP]. Use [.. I ... ] to select "General Setting", then press [ENTER]. Use [.. I ... ] to select "Video", then press [ENTER]. Use [.. I ... ] to select "Select Video", then press [ENTER]. Use [.. I ... ] to select the input jack type to connect, then press [ENTER]. If you want to use VIDEO IN jack, select "Video In".
CONNECTION TO A TV Make one of the following connections, depending on the capabilities of your existing device. - I RCA audio cable IDIIl==-~"""'\ RCA video cable ®'nl~~~..... e,~ vIDe(~f ... :cJ1!t=-_rI AUDIO OUT (DVDIVCR) VIDEO OUT Method 1 - analog audio , Metl10d 2 good picture ~I better picture COMPONENT S-VIDEO IN VIDEO IN (Green) bl (Blue) (Red) or RCA audio cable S-video cable component video cable DYO """"'0 """" "'" @)Li""l'__~, (!)'fI ' _ ..
A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) connector allows digital transfer of both digital video signals and multi-channel audio signals. ~ HDMIOUT When connecting with an HDMI cable, the audio signal will be output as the digital audio signal simultaneously, so you do not need the analog audio connection described on page 21. Cables not included. Please purchase the necessary cables at your local store.
I CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT I Dolby Digital DVD-video LPCM Dolby Digital DivX" MP3 / MP2 ...o :J 0- Actual Output Modes by Media Audio recording format of the disc I 1- c: n ...
• When you change the connections, all devices should be turned off. • Refer to the owner's manual accompanying external devices for more information. 2 Channel Analog Audio Connection Digital Audio Connection stereo system Dolby Digital decoder COAXIAL digital audio coaxial input jack analog audio input jacks RCA audio cable digital audio coaxial cable ova DlGlTAL AlJOlOOUT COAXIAL AUDIO OUT DIGITAL AUDIO OUT *MD deck or DAT deck can be also connected through coaxial jack.
INITIAL SETTING Turn on this unit for the first time, you need to follow these steps. 1 Press [I/O ON/STANDBY]. Before: Turn the TV on. Select the input to which the unit is connected. 2 Use [. / .... ] to select your desired language, then press [ENTER] to set language. 3 Press [ENTER] to activate "Clock Setting". I' ./ / '--1---1:1 4 TOSHIBA SE-R0295 o 0 0 0 Proceed to step 3 in "Clock Setting" on page 26.
SETTING THE CLOCK Set the clock before you try the timer programming. PaRS lOV re3 SPACE m SETlJP r :;Pl~" 1 Press [SETUP] and use [.& I~] to select "General Setting", then press [ENTER]. 2 3 Use [.& I~] to select "Clock", then press [ENTER]. "Clock" menu will appear. Use [.& I~] to select calendar or time, then press [ENTER]. JAN 101/2008 (ruE) Note.;, • Youf,l;:lp~ksetii ; fail~r~;or this u . 30 se'conds. .,*.
FORMATTING A DISC When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the desired mode. You can also manually format a DVD-RW once it has been used. Press [SETUP]. Use [.... 1T] to select "Format", then press [ENTER].
L .J F_O._RM_AT_T_IN_G_A_D_IS_C ,._ _ ~~~ ~~~ If you are using a DVD-RW or DVD+RW, you can format the disc by performing "Format". You can format DVD-RW for either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc. o 'h 0 '>- ',' ~ 0 0 II'" 0 1 .. ,~ r--, .~ i I 'J .. ,r: r."' SElUP " \ PI G .\i ," Insert a recordable disc. 1 Press [SETUP). 2 Use [.... /~) to select "DVD Menu", then press [ENTER). 3 Use [....
To prevent accidental recording, editing or erasing the titles, you can protect them from "DVD Menu" menu. 1 Press [SETUP]. 2 Use [... 1..-] to select "DVD Menu", then press [ENTER]. 3 Use [... I ... ] to select "Disc Protect OFF. ON", then press [ENTER]. 4 Use [... 1... ] to select "Yes", then press [ENTER]. e.g.) VR mode DVD-RW A disc will be protected. 'Tlti$Q~t!l~i~~~'may~ke' J TOSHIBA ... ~~f1i,~~o·lie c~mpjet:ed;{.
[iR~~ You can finalize discs automatically using this function. You can use this function to finalize discs after finishing all timer recordings and at the end of the disc space. o o o o SETUP E:J 1 2 3 4 Press [SETUP] and use [.6.. ,-.] to select "General Setting", then press [ENTER]. "General Setting" menu will appear. Use [.6.. ,-.] to select "Recording", then press [ENTER]. "Recording" menu will appear. Use [.6.. ,-.] to select "Auto Finalize", then press [ENTER]. Use [.6.. ,-.
~ r1<~SCS _ PLAYIN .. TH ~ t OTHER DVD PLAY RS --------_._--_._---_._--, Finaljzin a Disc ~~~~~ ~~~~~ You will need to finalize discs to play back on other DVD players. Finalizing may take several minutes up to an hour. Since the process of the finalization fills empty space of the disc, a shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. / 0 0 0 0 o II " 1 Press [SETUP]. 2 Use [.
To cancel finalizing... (DVD-RWonly) Note I' Finalizing a disc in video mode and +VR mode j automatically creates a title menu. • After you finalize the DVD+RW, you can call up the title list by pressing [TOP MENU], or you can call up the title menu by pressing [DISC MENU]. • Even after DVD+RW is finalized, you can still record or edit. After you finalize DVD-RW/-R or DVD+R, you ~ cannot edit or record anything else on that disc. m.
:rt. ~~Ir··1··1",.yf$'t'rvr'P"'tl • • .$lfWit;¥~.~.?t·tU'U,.tJI1111f You can select a recording mode among 5 options, and the recording time will depend on the recording mode you select as follows. You cannot record copy"protected program using this unit. Copy-protected video signal is included in DVDvideos, some satellite broadcasts, some pay-per-view stations and some "premium" stations.
• RDING Make Recording Compatible ... . Use this feature to make the discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with "Make Recording Compatible" set to "ON", the title list is automatically converted to our style. 1) Press [SETUP) and use [. / T) to select "General SettingJor Auto Cha ter You can set a specified time for chapter marks. 1) Press [SETUP) and use [. / T) to select "General Setting", then press [ENTER). 2) Use [.
SETTINGS FOR A RECORDING Recordi~ Audio Se~ect (XP) ____ --.3I . .., Setting Aspect Ratio for Video Mode ~f.BjG;B~~ You can enjoy high quality sound recording. This function works only when the recording mode is set at XP. 1) Press [SETUP] and use [.... I ... ] to select "General Setting", then press [ENTER]. 2) Use [.... 1... ] to select "Recording", then press [ENTER]. "Recording" menu will appear. ~~ ~~ You can set aspect ratio for video mode recording.
~~~~~ ~~~~~ Follow the steps to record TV programs. / DOD OPEN! CLOSE o 0 ~"' INPUT SELECT (!J~ 1 Press [I/O ON/STANDBY]. Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD]. 2 Press [OPEN/CLOSE .. ] to open the disc tray and insert your disc with its label facing up. 3 Press [OPEN/CLOSE .. ] to close the disc tray. DISPLAY lB It may take awhile to load the disc completely.
6 Press [REC el to start recording. "e" will be displayed for 5 seconds. • Press [PAUSE II] to pause recording. Press [PAUSE II] or [REC e] again to restart recording. 7 Press [STOP .l to stop recording. The recorded title will be included in the title list. (Refer to "Guide to a Title List" on page 70.) IWalt for a moment 1• •- - • • • _ - - 190% I This operation may take awhile to be completed.
TIMER RECORDING GljjC]jj~c:mc:D_ Guide to Timer Programming Display You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure • Connect the external tuner to either L1 or L2 and set it to output audio/video signals when it comes to the time you want to start recording. • Do not change the external tuner's channel while you are recording. You cannot watch one channel and record another at the same time.
3 Use L&. 1 T] to enter the date, then press [~]. 7 Refer to "Recording Mode" on page 33 for DVD or "Recording" on page 99 for VCR. • You can check the remaining recordable space of the disc when you select the recording mode. JAN/01 ........................................ ~.l. When pressing [T] at ~.l. the current date, the ~.l. date will change as Daily MON-SAT MON-FRI ~.l. follows. ~.l. e.g.) January 1st SAT Use [. 1T] to select a recording mode.
Checking, canceling, or correcting the timer programming information 1) Press [TIMER SET]. If the timer program did not complete correctly, the error number appears in the timer programming list. 2) Press [TIMER PROG.]. 3) Check the information on the list you want to edit. Each error number means: El-22 ~ Recording error other ~ E40 E37-39 ~ than below : 4-A) To delete the timer program: 1 Use [A 1 T] to select the program you want to delete, then press [ENTER].
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • If a disc is not inserted or if a inserted disc is not recordable (finalized DVD-RW/-R, finalized DVD+RW, a fully recorded disc, etc.), "DVD" on the front panel display flashes and timer recording cannot be performed. In some cases, ~ will appear momentarily around the start point as the unit attempts to record. Please insert a recordable disc.
, SATELLITE LINK You can set the unit to start recording whenever it detects the video signal from the external tuner. Preparing for the satellite link timer recording: Preparation on the tuner • The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to output audio/video signals when it comes to the time you want to start recording, and stop output audio/ video signals when it comes to the time you want to finish recording.
67 Press [ENTER]. 'To Standby Mode" is highlighted. Press [ENTER] again. In a second, the unit will be turned off automatically as it goes into the satellite link standby mode. To cancel the satellite link function while in the satellite link standby mode: Press [TIMER SET] to turn on the unit. To cancel the satellite link function while the satellite link recording is in progress: Press [.STOP] or [~ EJECT , . STOP] on the front panel of the unit.
Connection to an External D.4[!vice . Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front). Use S-video or the RCA audio/video cables for this connection. When connecting a DVC (digital video camcorder). use the DV input jack on the front panel instead of VIDEO IN jack. v~u~o r ~UDIO au; -I ov-our p;- or M". 1M":'. __ !!2.. =-1I ,,,,,I' "'~~ .._ ir.
.Bfl:fig,glg9Jm!n.IIA~",mJmrtn.;flb'rEr···**t%_!fitf·e"f" ~~~@$i~_ Before recording from an external device, refer to the instructions for the connection on page 44. 1 2 Wr!I'T·.trrtHfj;Wr,M1tfee Turn on the TV and press [I/O ON/STANDBY], and be sure to select the input of the TV to which the unit is connected. When you want to record to thedisc:: Press [OVD]. Press [OPEN/CLOSE ....] to open the disc tray. Place the disc to record properly. Press [OPEN/CLOSE .... ] again to close the disc tray.
- DVDUBBING Guide to, DV and On-Scree.n J)ispla c This function helps you to easily dub the contents of the DVC (digital video camcorder) to this unit. You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is compliance with the IEEE1394 standards.
~~~~~ ~~~~~ Before recording from DVC, see page 44 for connection instructions. o 0 0 0 0 INPUT SELECT IV ~ 2 3 Press [REC MODE] to select a recording mode. 4 With "Control" highlighted, press [ENTER] to display the available devices to control with the remote control of this unit. Use L.. I T] to select "DVC", then press [ENTER]. (Refer to "Recording Mode" on page 33 for DVD or "Recording" on page 99 for VCR.) Press [DISPLAY].
1 2 Before recording from DVC. refer to page 44 for connection instructions. e STOP REC [!J] 3 4 TOSHIBA SE·R0295 Press [VCR] first. Preparing for DV to VCR dubbing: • Insert a recordable cassette tape and make sure your DVC is in video mode. 5 Repeat the steps 1 and 2 on page 47. Press the PLAY button on your DVC to find where you wish to start dubbing. Then, press the PAUSE button on the DV camcorder when you come to the desired start point. Press [REC e] to start recording.
DVDNCR DUBBING You can copy a DVD to a cassette tape or copy a cassette tape to a DVD. This function will be possible only if the DVD or the cassette tape is not copy protected. Before starting this function, prepare for the recording on the DVD-RW/-R or the cassette tape. Refer to pages 33 and 99. Make sure: • Insert a recordable disc and a cassette tape with an erase-protection tab. Note for recording to a cassette tape: • The cassette tape's erase-protection tab is intact.
4 Use [. / T] to select "VCR .. DVD", then press [ENTER]. r.: It.' Gene<., I, Selling 4 Use [. / T] to select "DVD .. VCR", then press [ENTER]. 5 6 7 89 Press [SETUP] to exit. Press [OVO]. ",',' '1:'''' ", 5 6 7 8 9 :~-'1 .1\,1 Press [SETUP] to exit. Press [VCR]. Press [PLAY ~]. Then press [PAUSE II] at the point you wish to start recording. • Since it takes about a few seconds before the actual dubbing begins, please allow extra 5 seconds when selecting the starting point. Press [OVO].
The contents of DVD are generally divided into titles, and the titles are subdivided into chapters. Audio CDs are divided into tracks. Data disc contains MP3/WMA/JPEG/DivX@ are divided into folders, and the folders are subdivided into files. DVD video -Titlel-I' Title: Title2- Chl~p~er ~ ~.:'.'~~;/ .~::- ~ LId ~ //~d· ( 1 . .: p".r.2. '1;, Chapter: Track: Folder: Divided contents of a DVD video. Roughly corresponds to a story title in short stories. Divided contents of a title.
BASIC PLAYBACK Direc~ Pia back . o 0 0 0 0 II' OPENI CLOSE []J 1 2 Press [I/O ON/STANDBY]. Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD]. Press [OPEN/CLOSE ... ] to open the disc tray and insert your disc with its label facing up. ~Align the disc to the disc tray gUide, PLAY • fiJi~~ STOP f~'i~1 "~.VD '\ 'lflIlJ TOSHIBA SE·R0295 o 0 0 0 0 Note • Some discs may start playback automatically. , 52 EN 3 4 Press [OPEN/CLOSE ...
~~~~~ ~~~~~ 0 0 0 0 0 OPEN} CLOSE m 2 Press [OPEN/CLOSE .... ) to open the disc tray and insert your disc with its label facing up. 3 4 Press [OPEN/CLOSE .... ] to close the disc tray. 5 Use [... / T / ..... / ~ ) to select a desired title, then press [ENTER]. 6 Use [... / T] to select "Play From Start", then press [ENTER]. ~ SKIP 8 OJ It may take awhile to load the disc completely. Press [TOP MENU]. Title list will appear. Press [DISC MENU) to switch Original/Playlist if necessary.
BASIC PLAYBACK Back an, Audio CD and a CD-RWL-R with MP3/WMA/JPEG Files /11 When selecting track/file: Playback will start. 0 0 0 0 o II '\ OPEN! CLOSE (!J , When selecting folder: The files in the folder will appear. Use [.A. /T] to select the file or folder you want to play back, then press [ENTER]. • Press [PLAY ~], [ENTER] or [~] to move to any lower hierarchies. • Press [.....] or [RETURN] to move back to the previous hierarchy.
'tl~lr,YtW2,~,'flJ.,4QlYr>!;itt.·f:tMnw 't ltirfXrttlt'rg""tntt'ften itlir ltemm fN ·'''('t'M' tf1')'K.?\t#1jr'wtt'It' rb ctl GDI o 0 o o o OPEN! CLOSE ~ 1 2 Follow steps 1 to 2 in "Direct Playback" on page 52. Press [OPEN/CLOSE . ] to close the disc tray. It may take awhile to load the disc completely. File list will appear automatically. • To exit the file list, press [STOP.l. • To resume the file list, press [TOP MENU].
I I .OJ It is recommended that files to be played back in this unit are recorded under the following specifications: Official DivX@ Certified product • Playable codec of AVI files : DivX"3.x, DivX"4.x, DivX'"5.x, DivX@6.
I BASIC PLAYBACK j . ! ('. ":. Usin Paus~ t: .'c ~ :::l Press [DVD] first. 1) During playback, press [PAUSE II]. DVD may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. .... Playback will be paused and sound will be muted. ~ , Press [DVD] first. 1) Press [TOP MENU] or [DISC MENU] to call up the title list or disc menu. , 2) Use [,A. 1 T 1 .....
Skipping TV Commercials During "ttt'l You can play back from where you stopped playing back the disc last. Press IDVD] first. ~;,F?mnfjtt'fhwT'iltrttt7t1ftlreef c:mGR(:::Jjj~~aIi can skip TV commercials to enjoy the recorded programs without interrupting. YOLI 1) During playback, press ISTOP _]. The resume message will appear. Press IDVD] first. ~ 1 J 2)Press IPLAY~]. In a few seconds, playback will resume from the point at which it stopped last.
SlowForwar~ I ~~~~~r~ ~~~~~~ Press [OVD] first. 1) During playback, press [PAUSE II). Then press [FWD ~~) or [REV ....]. Every time you press [FWD ~~) or [REV ~~J. approximate speed will be changed as follows. (The sound will remain muted.) Press [DVD] first. 1) During playback, press [1.3X I O.8X PLAY). ~ xO.8: x1.3: ~: Press [1.3X I O.8X PLAY) once during playback. Plays back approximately at 0.8 times of normal playback. Press [1.3X I O.8X PLAY) twice during playback.
I _ . 0· SPECIAL PLAYBACK - - - .. .JI . Zoom Press [DVD) first. 1) During playback, press [DISPLAY) or [ZOOM). • If you press [ZOOM), skip to step3. This feature allows you to assign a specific point on a disc to be called back later. Press [DVD) first• • For audio CD, skip to step 2. 2) Use [ .... , ~) to select (§l, then press [ENTER) within 1 second, or wait for 1 second to display the selection menu. e.g.) DVD-video l)During playback, press [DISPLAY).
t... <;P~Ci c. ~" L -_._--,- - -- - - - - - - ."'''- - ._-- I ---~ nt'"..... ~.'l·· rLK 1 " ---- --~. - -- ChasilJ c, You can play back the already recorded part of the currently recording program without waiting for the recording to the end. This function works from 1 minute after the start of the recording. 1) During recording, press [PLAY ~]. Playback will start from the beginning of the program that you are currently recording. Screen for the current playback: ~ I'll ..
You can also play back a recorded title during current recording or the timer recording on the same disc. 3) Press [STOP _] once to stop playback. The resume message will appear. Screen for the current recording: 1) During recording. press [DISPLA VI. Screen for the current recording: L1 2) Select icon using [ ..... / ~ I. then press [ENTERI. The title number next to will be highlighted. D Title: Enter a desired title number to search using LA. / T] or [the Number buttons]. then press [ENTER].
SEARCH ~cR:ECfDI~cRJ113 Using [SKIP ~ ] I [SKIP ~ ] Using [SKIP ~ ] I [SKIP ~ ] Press [DVD] first. Press [DVD] first. 1) During playback, press [SKIP ~ ] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. • If there is no chapter in one title, the current title will be skipped. 1) During playback, press [SKIP ~] to skip the current track/file and move to the next. . The track/file will move forward one at a time.
L. S_EA_R_C_H_ _-'------ Time Search Press [DVD] first• • For audio CD, skip to step 2. 1) During playback, press [DISPLAV]. 2) Use [ ..... , ~] to select ~ , then press [ENTER]. e.g.) DVD-video e.g.) audio CD I ~.. '" iiiiiiiiiiB'~ I <.'Hllla~O!j The number next to Ell U will be highlighted. .t!?J, press [~]. When time search is not available, .t!?J and time To move to the number next to counter are not displayed. 3) Use [.... ,..- , .....
Title: The current title will be played back repeatedly. Chapter: The current chapter will be played back repeatedly. Available repeat fupction may vary depending the discs. Press [DYD] first. All: The current disc will be played back repeatedly. • For audio CD, MP3, or WMA, skip to step 2, or press [REPEAT] and skip to step 3. A-B: Desired section can be played back repeatedly. 1) Use [., ... ] to select "A-B", then press [ENTER]. 2) Press [ENTER] at the desired starting point A.
1 REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW .. ~~.,~~-~_ .. -~.~ •... ~~_.~._ I .. -\ ~.;nlftr.lln_'I°.'lnJ ~ You can program the disc to play back in your desired order. You can select the display time between 5 seconds and 10 seconds. Press [DVD] first. 1) Press [SETUP] in stop mode. Press [DVD] first. 1) Follow steps 1 and 2 in "Program Playback" on the left. 2)Use [.1 T] to select "CD Playback Mode", then press [ENTER]. "CD Playback Mode" menu will appear. 2) Use [.
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. ~cRD13 DVD-video may have subtitles in one or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages during playback. Press IDVD] first. 1) During playback, press IDISPLAY]. 1"'\ When playing back a DVD-video recorded with 2 or more soundtracks (these are often in different languages), you can switch them during playback.
L SELECTING THE FORMAT OF AUDIO AND VIDEO _ili.pmlf'I'.'111t ~ You can enjoy stereophonic virtual space through your existing 2 channel stereo system. Press [DVD] first. Some DVD-video have scenes shot from two or more angles. Angle information should be on the disc case if the disc contains multi-angle scenes. Press [DVD] first. 1) During playback, press [DISPLAY]• • For audio CD, MP3 or WMA, skip to step 2. 2) Use [ .... , ~] to select e ,then press [ENTER]. 1)During playback, press [DISPLAY].
SELECTING THE FORMAT OF AUDIO AND VIDEO ~~~~~~ CRD13 You can adjust the black level to control the brightness of the picture in order to get a better picture. 1) During playback, press [DISPLAy). 1m1. Press [ENTER] within 1 2) Use [ .... , ~) to select second, or wait for 1 second to display the selection menu. e.g.) DVD-video IT IC I(lj 0 3)Use L~ , ....) to select "Black Level", then press [ENTER). IT IC _~ I(lj 0 OFF 4)Use [A , .... ) to select "ON", then press [ENTER).
I Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [TOP MENU]. ITING Edl~ the recorded disc You will find editing discs is easy. This unit offers convenient edit functions which are possible only with DVD-RW/-R and DVD+RW/+R. You can edit the following from a title list.
DELETING TITLES Notes for deleting titles After the disc is fully recorded: DVD-R/DVD+R DVD-RWIDVD+RW • When a title is deleted from DVD-RW in VR mode, the recordable disc space will be increased. The Full-Recorded disc @ Deletel • When the last title is deleted from DVD-RW in video mode or DVD+RW, the recordable space will be increased. The Full-Recorded disc @ Delete! Delete! ~ r;Jy~~ fiJy~ ~!.~LV ~ ~ a new title. a new title. record a new title.
I ~-------------- ._-_. DELETING TITLES ~~~~~ ~~~~.~ You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back to the disc. Be sure to read "Notes for deleting titles" on page 71 before you delete the title. o o o 0 o 1 Press [DVD]. In stop mode, press [TOP MENU]. Title list, original or playlist will appear. • For VR mode DVD-RW, press [DISC MENU) to switch between "Original" and "Playlist". 2 3 4 II Use [. ,-..
, ~1i._i~1tr••C!Cfltt1j,ci'fl."'I!II'.).fltrl"c·rCr?l.n·Z'r!·lrr'("·tf.'t7j'",c~e@Wfc CP:R FO;'~'~' mode DVD-RW, you can create the playlist as you wish. You can add up to 99 titles to a playlist (as long as the total number of the playlist does not exceed 999 chapters). 1 Follow the step 1 in "DELETING TITLES" on page 72 to display the original. 'T,.... , 2 Use [.... ~] to select the desired title, then press [ENTER]. 3 Use [.... 'T] to select "Add To Playlist", then press [ENTER]. 4 Use [....
I L _ _• CREATIN_G_I_D_E_LE_T_I_NG_P_LA_Y_l_IS_T _ Erasin ~ list 1 2 A playlist can be deleted if it is no longer needed. / o 0 DOD f fj A. , j I vi J l SETUP Press [DYD]. Press [SETUP]. Main menu will appear. Use [. ,.] to select "OYD Menu", then press [ENTER]. 3 Use [.,.] to select "Delete All Playlists", then press [ENTER]. 4 Use [.,.] to select "Yes", then press [ENTER]. .:.'.' , I!Y "Are you sure?" will appear. Use [A I T) to select "Yes" and then press [ENTER).
EDITING DISCS ~~~~~ ~~~~~ You can put a name on the disc and change it from this menu. 4 Use [,. 1 T] to select "Edit Title Name", then press [ENTER]. 5 To enter a title name, follow the steps of "Guide to Edit Title Name" on page 76. character set TOSHIBA SE-R0295 area for entering title names When you finish entering a title name, press 1 2 Press [DVD]. In stop mode, press [TOP MENU]. [ENTER]. Title list, original or playlist will appear.
L E_D_IT_IN_G_D_IS_CS _ Puttin Guide to Edit Title Name 1) Use La. 'T] to select a desired character set, then press [ENTER]. DOD 2) Follow the list below, use [the Number buttons] repeatedly until the desired letter appears. .@/: ABC DEF m~ 3 F1 m~0~J PaRS TUV WXYl .;." I '.K (I)(;[)m ---m (*1) (*1) OJ SPACE f2!j o ;'j:C;TANl '.,i\;~~ !!~'f "!!' *' !"#$%&'() *+,-.
EDITING DISCS ~~~ You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. 0 0 OP£Ni 0 0 iNPi.Jf SELECT ClOSE 0 HOMI ~' 0, Ik.\ :!. Llrl'" AGe Gt-'! . ~ :, ", tiNa t;j ,; OS " por.s r~ TtlV W",iZ h ,) S.'l'fI.'NK , 1 2 3 Follow steps 1 to 3 in "Putting Names on Titles" on page 75 to display "Edit" menu. 4 Use [. / T] to select"Add" or "Delete", then press [ENTER]. 5 Use [./ T] to select "Ves", then press [ENTER].
wtjri~~ngtt~~·~RI!'J!
"--- --,II[ E_D_IT_IN_G_D_IS_C_S -_ I~. L_::l_ ~~ ~~ You can delete a specific part of a title. Even when parts of title are deleted from the playlist, the original title will remain as it is. 0 C- 1 Follow the steps 1 to 3 in "Putting Names on Titles" on page 7S to display "Edit" menu. 2 Use [oA. I T] to select "Scene Delete", then press [ENTER]. I~ i~ I :to I~ 0 OPEN: CLOSE I .. ~ c. e.g.) VR mode DVD-RW playlist. 1IlIl1\ GHt 4 o~.
3 Use [SKIP ~ 1~], [REV ....], [FWD ~ ], [PLAY ~] and [PAUSE II] to find the start point, then press [ENTER]. Then use [SKIP~ I~], [REV ....], [FWD ~], [PLAY ~ ] and [PAUSE II] again to move to the end point, and press [ENTER]. 4 5 Use [.1..-] to select "Yes" then press [ENTER]. "Are you sure?" will appear. Select "Yes" using [. ,..-) and then press [ENTER). The part of the title is deleted. The cursor will move to "Preview".
1------ EDITING DISCS 1I~ , ~ '0 i~ ~0&i ~:'S P1ay1llt You can divide one title into two new titles. 3 l~ r --- Use [., ...] to select "Edit", then press [ENTER]. e.g.) VR mode DVD-RW playlist liD",! I/o ocr A3C 1; ii 3 ;.> JKl ,} M'-40 6 ()(j lUV : / B I ~ g ,y WXV7 I( c, 9 SATUNK nl&PlAY AUDIO o Sf: i\JP CD; 4 5 6 Use [SKIP 1+11], [SKIP ~], [REV ....], [FWD ~], [PAUSE II] and [PLAY ~] to decide the point at which you will divide the title. Use [., ...
Clii Playllst You can combine two titles into a single title. o 0 0 0 0 1 Follow the steps 1 to 3 in "Dividing a Title" on page 81 to display "Edit" menu. 2 Use [..&. / T] to select "Title Combining", then press [ENTER]. Title combining setting window will appear. Selected title grays out, and the frame of the next title becomes yellow. rAIl_il'. . . . JANJ31t0811:00PM L1 LP mrmn , , -gill . 2Cl ~CJCJCLI ~I=' 3 4 Use [..&. / T / .....
To prevent the accidental editing, or erasing of the titles, you can protect them in "Edit" menu. You can cancel the title protection feature after it is applied. 1 2 Follow the steps 1 to 3 in "Putting Names on Titles" on page 75 to display "Edit" menu. Use LA. I .... ] to select "Protect", then press [ENTER]. • If the title is protected, the original list. 3 rn icon will appear in Confirm the indication "OFF. ON". Press [ENTER] again. • If the title is already protected, "ON. OFF" will appear.
EDITING DISCS For titles in video mode DVD, you can set or edit chapter at every time interval. You can clear the chapter mark too. You can specify the interval of chapter marks for titles last more than 5 minutes. TOSHIBA SE-R0295 o 84 EN 0 000 1 2 Follow the steps 1 to 3 in "Putting Names on Titles" on page 75 to display "Edit" menu. 3 Use [A''''] to select the desired interval, then press [ENTER]. 4 Use [A , ... ] to select "Yes", then press [ENTER]. 5 Use [A , ...
The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Playback Items (highlight is the default) Parental Lock -. page 88 ----------------Audio Out -. page 89 Contents Set the parental level for DVD playback.
LIST OF THE DEFAULT SETTINGS Setup Display Items (highlight is the default) V·Chip Canadian English Rating 18+ ~ page 92 14+ PG Contents Set the viewing limitation according to Canadian English Rating. G C8+ C E Change the password. Change Password ~ page 93 Video Progressive ~ page 94 TV.Aspect ~ page 94 ON OFF '''''' Set to the progressive scan mode (set to "ON") or to the interlace scan mode (set to "OFF"). ··4~3·L~·t~~~·B~;······. .
GENERAL SETTING ~.tr,e.I":frf.Ft\itF'r+tf!llf1*"r,sN'f'Bnt1t".;:tl)JWW.''R.''rrx''''jff.l'erW'rrftl'rRtte';:'frW' Press [STOP _) if you are playing back a disc. 1 Press [SETUP] and use L... I T] to select "General Setting", then press [ENTER]. 2 Use [... 1 T] to select "Playback", then press [ENTER]. 3 Use [... 1T] to select a desired item, then press [ENTER]. ~ Submenu will appear. 4 5 TOSHIBA SE-R0295 o 0 0 0 Refer I}] to [l] on pages 88 to 90 and set the selected item.
GENERA SETTING ~Ia"~ck (~ollt'd) ., ., ' Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. Use [.1 T] to select the desired level, then press [ENTER]. PI:Wb..1Ck Display Video Recordi"Q Clock Your setting will be activated.
GENERAL SETTING ' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - -_._~._-------_._--- [f] Settings for Dolby Digital (Default: Stream) Audio Out Choose the appropriate audio setting for your external device. Use [. 'T] to select a setting, then press [ENTER]. It will only affect a disc playback. ItJ-GOllOni1Sol!lnll Use [. 'T] to select a desired item, then press [ENTER]. Piayback ::::~ Clock DivX 1 n '.. II.
GENERAL SETTING Pia back (collt'd) Disc Menu Language (Default: English) Set the language for disc menu. Use [... 'T] to select a language, then press [ENTER]. 1,,-' - .~ sOtung . ' .' 1··:". . ·:·KIc iOfsJjIa, I 'MCO Re.:oromg ICbclo. ! !JlvX I HOM! Note"."",.!,~, " ,fi' . ''''~'' ., Ollly tl)eJ~riguages~uppp~~,by t~e d.is~,~~I!\~e, .• .selected.·.... .. "!'!.~.!T"'\" ',~''', .)~i~_"i. • Audio language setting may not be availal:>leto some discs.
G " ,DisDla\l ;. . . . . .'.r.lltlrf~i'mel:r.'frtt.hI]If'.rtf1!1rtlj'l:'.int'ttt!j'ifn!'!.!"'ny'i, . .,""t.ht&"Sffl,hI;"ftift [] OSD Language (Default: English) Set the language for the on-screen display. Use [.. I T] to select a language, then press [ENTER] . ••• .@/: ABC DEF GHI JKl MNO 01111](11 paRS TUV WXYZ .111111 SPACE III seTUP II Your setting will be activated. Screen Saver (Default: 10 minutes) Set the time to activate the screen saver function on the TV screen. Use [..
_J GENERAL SETTING ,Dis !a (collfd) V-Chip With the v-chip system in this unit, you can set the viewing limitation for the analog TV programs received from the external tuner or recorded on DVDs to prevent your children from watching inappropriate programs. If the unit detects a blocked program, a restriction message appears and you are not allowed to view the program. And be noted that the recorded contents on the cassette tape are not blocked.
GENERAL SETTING []]I Change Password [Canadian English Rating] Category Rating higher 18+ Adult audience only 14+ Unsuitable for ages under 14 PG G General audience C8+ For children over 8 C For all children E Exempt program I Parental guidance suggested lower As for TV Rating's TV-MA, TV-14, TV-PG, or TV-Y7, you can further set the sub ratings to block specific elements of programming. Press La. 1....
I ENERAl I t. Progressive (Default: OFF) This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to "ON". 1) Use [... I T) to select "ON", then press [ENTER). 2) Use [~I ~) to select "Yes", then press [ENTER). 3) Use [... I T) to select "Yes" within 15 seconds, then press [ENTER). Your setting will be activated.
GENERAL SETTING -...... j o 0C ~ 1 0 0 0 3 0 !NPUT SHECT HDMl ;; ~ 1/6 -,!,,' A
L G_E_N_E_RA_L_S_E_T_T_IN_G -----J HOMI 0 0 L'~ I~°tr r.q o 0 1 2 0 r.,C·· ~ puc ", I :Kl P0Ri T!.JV "'}j(l Use [.1 T) to select "HOMI", then press [ENTER). ."y'" <; " Press [SETUP) in stop mode and use [.1 T) to select "General Setting", then press [ENTER). (), 1'\1' SETUP j,l'PLA{ (S'J • You cannot select HOMI when an HOMI cable is not connected and the item is shown in grey color. .0 p " 3 Use [.1 T) to select a desired item, then press [ENTER).
GENERAL SETTING ......o :::l 0.. ...o'c: n lIJ :::l HDMI Audio (Default: ON) If you do not want to output the audio through HDMI (when you digitally output the audio through the COAXIAL DIGITAL AUDIO OUT jack to your audio system, etc.), you can set the HDMI audio output off. "o Use [. ,..-] to select a setting, then press [ENTER]. :::l :::l :::l ...o' /I) n VI • Set to "OFF" when the HDMI sound is not output. Your setting will be activated.
Reset the setting to default. 1 2 Press [SETUP] in stop mode and use La. / T] to select "General Setting", then press [ENTER]. 3 Select "Yes" using La./ T], then press [ENTER]. Use La. / T] to select "Reset All", then press [ENTER]. "Are you sure?" will appear. Select "Yes" using La. 'T] and then press [ENTER]. Your setting will be initialized.
.. t~~~·~~~·<~~'~~·~~~<~ <'~ VCR FUNCTIONS ~,~~<.<. ~~~,."".,~~, ' ~ ~ ~ ~ ' · ~ - ~ ~ ' ~ ~ ' 1 1IIII.,'.ro*i.rfPiliMllq,,,,•• 1) Press [1/0 ONISTANDBY] on the remote control or the front panel of the unit. When you are playing back a cassette tape, turn on the TV and be sure to select the input to which the unit is connected. Press [VCR]. 2) Insert a prerecorded cassette tape. Press [PLAY ~ ] to begin playback. 3) During playback, press [PAUSE II]. Playback will pause and sound will be muted.
VCR FUNCTIONS This feature allows you to set the recording length simply by pressing [REC e] on the remote control. An index mark will be assigned at the beginning of each recording you make. You may skip to a specific marked point by following the steps below. Press [VCRI first. 1) During normal recording, press [REC e] to begin the one-touch timer recording. You can select a fixed recording time by pressing [REC e] repeatedly. • • .(0-30) - - -••• (1:00) (Normal recording) L .(8:00) I .~---.
VCR FUNCTIONS ::I .... I .... I&. .. I~ Other 0 erations O· ::I '~I_- This feature allows you to go to a specific point on a cassette tape by entering the exact amount of time you wish to skip in order to reach the point. Press [VCR] first. 1) Press [SEARCH] repeatedly so that "TIME SEARCH" menu appears. 2)Using [the Number buttons], enter your desired time to skip within 30 seconds. You can set the time up to 9:59. TIME SEARCH ~2;5.~ . 3) Press [REV ....], [FWD ~] to start time search.
TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Remedy • Check that the AC power cord is connected securely. • Check the breaker (in case of power failure). • Press [TIMER SET] to cancel the timer standby mode. There is no picture. • Re-connect the connecting cords securely.
L.- . TROUBLESHOOTING . ----~---.-.- Remedy • Before connection, turn on the power supplies for both this unit and the DVC, and make sure that these units are in stop mode. • Only a "DVC-SD" signal can be input from the DVC to this unit. Other types of signals are not supported. • Do not connect any device other than the DVC. Even if a recorder or PC with another DV terminal is connected, the DV function will not operate.
NG Remedy The subtitle language cannot be changed or turned off. • Multilingual subtitle are not recorded on the DVD-video. The angles cannot be changed. • Multi-angles are not recorded on the DVD-video being played back. • The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up. • The DVD-video prohibits changing angles. • Try changing the angle using the DVD-video's menu.
TROUBLESHOOTING Error message Solution Cause Disc Error - Please eject the disc. Playback feature may not be available on this disc. Region Error - Please eject the disc. Playback is not authorized in your region. Parental Lock On The current selected parental level prohibits playback. Recording Error This program is not allowed to be recorded. Recording Error This program is not recordable in Video mode. Recording Error This program is not recordable in +VR mode.
LANGUAGE CODE Language Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji f'innish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi 106 EN Bm!I 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 59
GLOSSARY Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical .signal, but is an indirect representation of sound. See also "Digital Audio". Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as it is high).
SPECIFICATIONS • This model complies with the below specifications. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future.
LIMITED WARRANTY Limited United States Warranty Digital Audio Video ("DAV") Product - Exchange Warranty Toshiba America Consumer Products. L.L.C. ("TACP") makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE USA.
Limited Canadian Warranty For Toshiba Brand Digital Audio/Video Products Toshiba of Canada Limited ("TCl") makes the following limited warranties to original consumers in Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TOSHIBA BRAND DIGITAL AUDIO/VIDEO PRODUCT (the "DAV PRODUCT(S)" or "DAV Product(s)") AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
LIMITED WARRANTY IF THE DAV PRODUCT FAilS TO WORK AS WARRANTED ABOVE, YOUR SOLE AND EXCLUSIVE REMEDY SHAll BE REPAIR OR REPLACEMENT OF THE DEFECTIVE PART. IN NO EVENT Will TCl, TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs OR ASPs (THE" RELATED PARTIES" ) BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES, MONEY, REIMBURSEMENT. COSTS OR EXPENSES.
TOSHIBA Printed in China 1VMN24593 / E9KGAUD *****
DVD VIDEO RECORDER I VIDEO CASSETTE RECORDER D-VR610KU Be sure to read the Safety Precautions in the Owner's Manual carefully before using this unit. ~ Lonnections ~ • RCA audio cable (LlR) xl • RCA video cable x l HDMI, DV, S-Video and RF coaxial cables are commercially available. . ' ._ Note: • All devices should be turned off and disconnected from the power outlet, when you make the connections. Connection to an Extenza1 uner. ') Make the connection as illustrated below.
VCR and basic D tiJ conn 1) Make the connection as illustrated below. (1 rear of your TV -(!) R L AUDIO IN I RCA audio cable (~(JjI:::Jo-~, RCA video cable rear of this unit AUDIO OUT (DVDNCR) VIDEO OUT Available [(u: DVD 1) Make one of the following connections, depending on the capabilities of your display device. analog audio (AUDIO OUT (DVD)) good picture (S-VIDEO OUT) better picture (COMPONENT VIDEO OUT) • S.vlDEO IN rear of your TV COMPONENT VIDEO IN (GrMl'll ",...
You need to follow these steps when you turn on this unit for the first time. o 0 0 0 a Press [I/O ON/STANDBY]. Before: Turn the TV on. Select the input to which the unit is connected. Use [~ / .... ] to select your desired language, then press [ENTER] to set language. I I Initial Setting OSD~ English ~ ~ • TOSHIBA SE·R0295 Press [ENTER] to activate "Clock Setting". *There is no Auto Clock Setting function in the unit. You need to set the clock manually. lin'" Setting o 0 I 000 . .
*Make sure the external tuner is connected to L1 or L2 input. tJ 0 0 0 0 ~ ~ Press [DVD]. v Press [OPEN/CLOSE .... ] to open the disc tray and insert your disc with its label facing up. This unit can record to DVD-RW, DVD-R, DVD+RW and DVD+R. DVD-R and DVD+R can only be recorded to once. DVD-RW and DVD+RW can be recorded to and erased many times. Press [REC MODE] to select a recording mode.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE If you are experiencing a technical problem or have questions regarding operation, authorized service centers, warranty or parts contact our Customer Service Department at: 1-800-631 -3811 For DVD inquiries, including TVIDVD combos, DVD/VCR combos, TV/VCR/DVD combos, DVD Changers and DVD Home Theater Systems please call: 1-866-583-7353 For DVD recorders, including DVD/Tivo, please call: 1-800-319-6684 Mon. - Fri. 10:00 a.m. to 7:00 p.m.