English Get started with Freeview Freeview gives you over 50 TV channels to play with, not to mention 25 radio stations. Start watching all your favourite TV content today, just connect your aerial and tune in. Keep up-to-date New channels are launched on Freeview from time to time along with other updates to the service. So it pays to retune your digital TV periodically to make sure your Digital TV/Radio channels are up to date.
Contents English Viewing Info Banner, Electronic Programme Guide..................................................................... 20 Viewing Info Banner........................................... 20 Electronic Programme Guide............................ 20 Language Selection............................................... 21 Language Settings............................................. 21 Preferred........................................................ 21 Current......................................
English Playing MP3 Files.............................................. 40 Sources............................................................. 28 Viewing JPEG Files........................................... 40 Other Settings.................................................... 28 Slideshow Feature............................................. 41 Using a Conditional Access Module.................. 28 Setting Timers, Setting Date/Time......................... 29 Video Playback................................
Safety Precautions English This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Installation and Important Information English Where to install Sturdy tie (as short as possible) * Button and stand style is dependent on model. “P” Clip position on TV is dependent on model. Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
Important safety information English • Any function related to the digital television (with the DVB logo) is available only within the country or area where such signals are transmitted. Verify with the salesperson if it is possible to receive a DVB - T/C signal in the area where you live. • Even if the television conforms to the required DVB - T/C specifications, the compatibility with future digital DVB - T/C transmissions is not guaranteed.
Removing the pedestal stand Note : • The bracket shown above is a sample image. The bracket and fixings are not supplied with the TV. Removing the pedestal stand (1) Carefully lay the front of the unit face down on a flat, cushioned surface with the stand hanging over the edge. (2) Remove the screws. (3) After the screws are removed, hold the pedestal stand in place,then remove the pedestal stand and the plastic moulding from the TV by removing away from the TV.
The Remote Control (TV - DVD) English Simple at-a-glance reference of your remote control. SLEEP SCREEN FAV LANG. PRESETS 1. Standby Standby 20. Green button Repeat 2. Image size 21. Picture mode selection 3. Sleep Timer 22. No function 4. Mono/Stereo - Dual I-II / Current Language (in DVB channels) Language selection (Set language) 23. Teletext / Mix (in TXT mode) 5. No function EPG 6. Numeric buttons Numeric buttons SWAP 7.
Connecting External Equipment Aerial cable:........................................................... Connect the aerial to the ANT. socket on the rear of the TV. SCART lead:.......................................................... If you use a decoder* or a media recorder, it is essential that the scart cable is connected to the TV. Before running first time installation, any connected devices need to be set to standby mode.
Connecting an HDMI® or DVI Device to the HDMI Input English The HDMI inputs on your TV receive digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. These inputs are designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
Connecting a Computer Connecting a DVD Player English Connecting to a DVD Player via YPbPr To Connect a Computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers.
Power Save Mode English Environmental Information This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps: You can use Power Save Mode setting, located in the Picture Settings menu.
Controlling the TV Switching on Using the Remote Control If the standby LED is unlit, check that the mains plug is con/ I button on the back nected to the power and press the side of the television to switch the television on. Press the MENU button on the remote control to see the menus. To put the television into Standby, press button on the remote control or on the TV. To view the television, press button again. The picture may take a few seconds to appear.
Initial Installation English Before switching on the TV, put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your TV. To set up the TV, use the buttons on the remote control as detailed on page 8. IMPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. 1. Connect the mains plug and switch the TV to on on using the / I button.
Initial Installation - continued Auto Tuning English 9. If you select Aerial option from the Search Type screen, the television will search for broadcasts. 10. The Auto tuning screen will appear and the television will start to search for available stations. The progress bar will move along the line. You must allow the television to complete the search.
English Manual Tuning, Fine Tuning The television can be tuned-in manually using Manual Search feature. Digital Aerial Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. • Select Manual channel scan from the Install and Retune menu and press OK. After selecting search type as Digital Aerial, you can enter the multiplex or frequency number using the numeric buttons and press OK button to search.
Re-tune Section Toshiba Digital TV This guide can be used to help you re-tune the following product with the remote control below. Make sure your TV is on and a digital channel is selected SLEEP SCREEN FAV LANG. 1 ) Press MENU and press ◄ or ► to select Install and Retune and press OK. Press ▲ or ▼ to select Automatic channel scan (Retune) to start the process. PRESETS MENU EPG SWAP SOURCE C DISP. SEARCH MODE INFO CH V 2 ) Select the desired search mode using ► and press OK button.
General Operation English Stereo and Bilingual Transmissions Standby Notifications If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on: Stereo… Press LANG. to select Stereo or Mono.
Channel List, Sorting Programmes, Programme Locking Viewing Channel List • Selected channel is now moved. The channel order may be changed to suit your personal preference. • Select Channel List from the main menu and press OK button. The following menu will be displayed: Deleting a Channel You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag channel. • Select the channel that you want to delete and select Delete option. Press OK button to continue.
Viewing Info Banner, Electronic Programme Guide English Viewing Info Banner • Press SUBTITLE button to sort channels by a genre. • Press INFO button. The information screen will appear giving details of the channel and programme currently being viewed. • For information on a highlighted programme, press INFO button. • Whenever you change channel, the TV displays the broadcast picture along with an information banner at the bottom of the screen (available only in DTV mode).
Language Selection English Language Settings Using this menu you can adjust the preferred language settings. • Press MENU button and select Settings by using Left or Right button. • Select Language from setup menu and press OK to view this menu. Press the RETURN button on the remote control to exit. Preferred These settings will be used if available. Otherwise the current settings will be used. Audio: by pressing Left or Right button change the audio language.
Digital Settings - Parental Control, Menu Lock, Set PIN You can view or set parental preferences of your TV. English Viewing Parental Control Menu Child Lock Press MENU button and select the Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Parental and press OK to continue: Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select parental and then press OK to continue.
Configuring Picture Settings You can configure picture settings of your TV by using Picture Settings menu. English Configuring Picture Settings Brightness You can use different picture settings in detail. You can customize current picture mode settings as desired. For example, you can change items such as, Brightness, Contrast, Colour, Sharpness and Hue. Sets the brightness value for the screen. Press MENU button and select Picture by using Left or Right button.
Configuring Picture Settings - continued English Dynamic Contrast: You can change contrast rate by using dynamic contrast function. Dynamic contrast can be set to one of these options: Low, Medium, High or Off. Note: The reset function does not reset the settings for Mode, Colour Temp, Noise Reduction, Picture Zoom and HDMI True Black. Colour Temp: Colour Temperature increases the ‘warmth’ or ‘coolness’ of the picture by increasing the red or blue tint.
Changing Picture Format 16:9 Subtitle 14:9 14:9 Zoom 4:3 Cinema Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9 etc.) black bars may be visible on the top and bottom of the screen. When subtitles are included on a letterbox format broadcast, this setting will raise the picture to ensure that all the text is displayed.
Configuring PC Picture Settings English PC Picture Settings (*) V Position (*) While in VGA/PC mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode. V (Vertical) Position shifts the image vertically towards the top or bottom of the screen. PC Picture controls Contrast, Brightness and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu.
Configuring Sound Settings Configuring Sound Settings Sound settings can be configured according to your personal preferences. Press MENU button and select Sound by using Left or Right button. Press OK button to view Sound Settings menu. Note: Equalizer menu settings can be changed manually only when the Equalizer Mode is in User. Balance (Only for speaker) This setting is used for emphasizing left or right speaker balance. • Press Left or Right button to change the level of the balance.
Settings Menu Operation, Conditional Access English Configuring Your TV’s Settings Other Settings Detailed settings can be configured to suit your personal preferences. Viewing Settings Menu Press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Displays other setting options of the TV set.
Setting Timers, Setting Date/Time English Timers Editing a Timer To view Timers menu, press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Timers and press OK to continue: • Select the timer you want to edit by pressing Up or Down button. Setting Sleep Timer The television can be set to turn itself Off after a certain length of time. • Highlight Sleep Timer by using Up or Down button.
Source Settings, Other Controls English Configuring Source Settings Configuring Other Settings - General You can enables or disable selected source options. The TV will not switch to the disabled source options when the SOURCE button is pressed. You can configure the settings of your TV. Select Settings from main menu and press OK to view the Settings menu. Press the MENU button on the remote control to exit.
Other Controls - continued English Blue Background If the signal is weak or absent, the TV will automatically change to a blue screen. To enable this, set Blue Background to On. • In the Other Settings menu, select Blue Background and choose On or Off using Left or Right button. Software Upgrade This feature helps to keep your TV updated. It works automatically and searches for new information when available. Note that this setting is inactive to be modified.
DVD Mode This television has a built-in DVD module. The following instructions are for correct operation of the DVD. English • Warning: Risk of exposure to radiation from class 1/class 3b visible and invisible laser beams. Do not stare directly into beam. • Multi-Audio (up to 8) support (according to disc content). • Multi-Subtitle (up to 32) support (according to disc content). • Multi-Angle (up to 9) support (according to disc content). • 8 level parental control.
DVD Mode General Operation English DVD - Control buttons on the TV 1. Disc loader 2. Play / Pause ( / ) button Plays / pauses the disc. When DVD menu (root menu) is active, this button functions as “button select” (selects the highlighted item in menu) if this is not prohibited by the disc). 3. Stop / Eject ( / ) button. Stops the disc playing / Ejects or Loads the disc. NOTE: You cannot eject the disc via the remote control.
DVD Mode English You can operate DVD, movie CD, music or picture CD’s content by using the buttons on your remote control. Below are the main functions of commonly used remote control buttons.
DVD Mode General Operation English Notes on DVD Playback How to watch a DVD NOTE: DVD mode cannot be accessed unless a DVD is inserted or a DVD control button is pressed. If you switch to another source by pressing SOURCE, SWAP or CH / buttons on the remote control, DVD playback will be paused automatically. You should press PLAY and resume the playback manually when you switch to DVD mode. 1. Switch on the TV. 2. Switch to DVD source using the “SOURCE” button on the remote control. 3.
DVD Mode General Operation English DVD Mode Configuration DEFAULT 1. While in DVD source, press DISP. button to access DVD Setup menu. This is only possible if there is no playback. If you choose RESET and press OK, the factorypresets are loaded. Parental level and parental password does not change. DOWNMIX This mode can be selected when the digital audio output of the TV is used. SURROUND Surround sound output. STEREO Two channels stereo. PARENTAL 2. This menu is operated using “ ” or “ ” buttons.
DVD Mode Troubleshooting & Tips English The DVD picture quality is poor Notice 1. Make sure the DVD disc surface is not damaged (no scratches, fingerprints etc.). This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation.
Appendix A: DVD Mode Supported file formats English Media File Extension Format Supported (Maximum resolution/Bit rate etc.) Video .mpg/.dat/. vob Movie .avi Audio MPEG1 MPEG Layer 1/2/3 MPEG2 MPEG2 XviD/3ivx PCM/MP3 MPEG4 PCM/MP3 MS ISO PCM/MP3 Support SP and ASP PCM Sample Rate: 8K ~ 48KHz MPEG 1/2 Sample Rate: 8K ~ 48KHz, Bit Rate: 64K ~ 320Kbps XviD Version up to:1.1.2 MPEG4 Music - .
USB Media Browser Manual Start • To display Media Browser window, you can press MENU button on the remote control and then select Media Browser by pressing Left or Right button. • You can also select Media Browser from the Quick button menu. • Only limited types of USB device are supported. Therefore, it is suggested not to use USB for playing Media Player. • Non-supported characters will be replaced with a square (□). • Press OK button to continue.
USB Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB memory English Playing MP3 Files Viewing JPEG Files To play mp3 files from a USB memory, you can use this menu screen. To view photo files from a USB Memory, you can use this menu screen. When you select Photos from the main options, available image files will be filtered and listed on this screen. • / : Navigate menu • Play ( button): Starts the playback. • Stop ( button) : Stops playback.
USB Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB memory English Slideshow Feature You can use this feature to display photos on your TV. • Pause ( • Continue ( button) : Pauses the slideshow. button) : Continues the slideshow. • Loop/Shuffle (GREEN button): Press once to disable Loop. Press again to disable both Loop and Shuffle. Press once more to enable only Shuffle. Press again to enable all.
USB Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB memory English In order to display movie subtitles correctly, you should set a “Movie Subtitle” language. See the section, “Movie Subtitle” in “Language Settings” for selecting Movie Subtitle language. Press RETURN button to switch back to previous menu.
Analogue Only Text Services This television has a multi-page text memory, which takes a few moments to load. English Analogue Text Services Revealing Concealed Text Before using the text services, the required language region must be chosen. To discover the solutions on quiz and joke pages press the INFO button. • Select Language from the Settings menu. • Press the Left or Right button to choose the required language region. • After the Teletext language is selected, press MENU button to exit.
Appendix A: PC Input Typical Display Modes English The following table is an illustration of some of the typical video display modes. Some, due to the display native resolution, are scaled automatically to enable correct image to be displayed. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) EXT-1 (SCART1) EXT-1 (SCART2) Side AV Supported Signals Available PAL O NTSC 60 O RGB 50/60 O SECAM O PAL O NTSC 60 O SECAM O PAL 50/60 O NTSC 60 O SECAM 480I YPbPr 60Hz O O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O HDMI1 720P 60Hz O HDMI2 1080I 50Hz O 1080I 60Hz O 2
Appendix C: PIN Information English Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
Appendix D: Supported File Formats for USB Mode Movie Extension Format Notes Video Audio dat, mpg, mpeg Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM 1080P@ 30fps 50Mbit/ sec dat, mpg, mpeg MPEG2 ,H.264, VC1, AVS, MVC MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM H.264:1080Px2@25fps 1080P@ 50fps MVC: 1080P@ 24fps Other: 1080P@ 30fps” 50Mbit/ sec .vob MPEG2 MPEG1/2 Layer 1/2/3, AC3, LPCM 1080P@ 30fps 50Mbit/ sec .
Specifications and Accessories English Broadcast Systems/Channels DVB-T MPEG2, DVB-T MPEG4 HD, DVB-T2 DVB-C MPEG2, DVB-C MPEG4 Video Input PAL, SECAM, NTSC 4.
License Information • DVB is a registered trademark of the DVB Project. • [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the television. MP3 licence letter MPEG Layer-3 audio coding technology licensed from Fraunhofer LLS and Thomson.
Q & A Section English Sound Picture General Question Answer Why is there no sound or picture? "Check the TV is not in standby mode.
English EU Conformity Statement This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA TELEVISION CENTRAL EUROPE Sp. z o.o., ul. Pokoju 1 Biskupice Podgórne 55-040 Kobierzyce, Poland This product is labeled with the CE Mark in accordance with the related European Directives, notably Low Voltage Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC and RoHS Directive 2011/65/EU.