User manual

41
Introduction
Viewing
・
Listening
and Operation
Set up
Recording
Others
40
Introduction
Viewing
・
Listening
and Operation
Set up
Recording
Others
Presetting of Camera Position by Administrator
The presets function enables you to assign up to ten different positions and
names for the camera. Clicking the
button on the basic administrator
controller opens the preset controller.
Number and Item Description
⑦




8 




9


10


The Auto Patrol feature moves the lens automatically
to all the configured preset positions in order. Clicking
the button starts Auto Patrol. Clicking one of
buttons stops the action.


The Scan feature automatically moves (swivels) the
lens horizontally back and forth once. Clicking the 
button starts Scan. Clicking one of 
buttons stops the action.


"Continuous Recording" button. The list of
"Continuous Recording" will appear.
"EXT. Control In" button. The list of "EXT. Control In"
will appear.


NOTE
●
Setting the Manual mode adjusts brightness only by the lens aperture.
●
Zooming, PAN/TILT operation or moving to the screen center during manual
focus adjustment automatically sets the Auto Focus mode.
●
The value immediately before operation of the auto panning function will be
maintained as the focus value during operation of the auto panning function.
The Auto Focus mode will set after operation completes.
●
A picture displayed by the button (one-shot button) should be saved
using "Save Picture As..." with a mouse right button. However, depending on
installation (Ceiling/Desktop) and its settings, the picture may be carrying
out vertical reversal.
Viewing and listening (Cont.)