User manual

81
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
80
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
● Function Settings
1) Set a "Scan Speed."
Fast
Slow
2) Set "Power on Default Position"
This function designates where camera moves when camera is turned
on.
Center: Moves to positions of 0
｡
for PAN and 0
｡
for TILT.
Home: Moves to Preset Number 1.
Scan: Starts auto panning.
Auto Patrol: Starts auto patrol.
3) Set "Freeze Frame."
ON: Under "Auto Patrol", images will not be shawn while camera moves
from Preset Number to next Perset Number.
OFF: No "Freeze Frame".
● Association to Alarm
1) Set "Alarm Association."
OFF: Does nothing. "Alarm Association Type" or "Preset Num-
ber" cannot be set.
Preset: Performs preset moving when an alarm occurs.
Auto patrol: Starts auto patrol when an alarm occurs.
2) Set "Alarm Association Type."
Alarm In: "Alarm In" will activate "Association to Alarm".
Motion Detection : "Motion Detection" will activate "Association to Alarm".
3) Set when "Alarm Association" is set to "Preset."
Preset Number: Choose preset Number.
Resume to Previous Position :Camera moves back to position before "Assciation to
Alarm" ocured.
Enable: 10, 30 and 60 seconds
Disable: Stays in the position moved to "Associa-
tion to Alarm."
PAN/TILT Basic Settings
Basic settings for PAN and TILT.
1 Click "PAN/TILT Settings" in the Admin. Menu.
･ The sub menu for PAN/TILT Settings will appear.
2 Click "1. General" in the sub menu.
･ A setup screen of "PAN/TILT - Basic Settings will appear.
3 Configure each setting items.
･ Click the Save button to save settings.
･ The settings will not be reflected unless the Save button is clicked.