User manual

9190
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
Multi-Screen Display/Adding and Removing Cameras
Cameras for displaying in the multi-view screen can be added.
1 Click "Multi Screen Display" in the Admin. Menu.
･ The sub menu for multi screen display setting will appear.
2 Click "1. Adding and Removing Cameras" in the sub
menu.
･ A setup screen of "Multi Screen Display / Camera Addition and
Deletion" will appear.
3 Configure each setting items.
･ Click the Save button to save the settings.
･ The settings will not be reflected unless the Save button is clicked.
● Setting to Enable Multi Screen Display Settings Swiching
Set ON or OFF for Multi Screen Display Mode.
ON: Enables the Multi Screen Display.
OFF: Disables the Multi Screen Display.
● Selecting camera for multi screen display
･ Enter "Camera Information", "Access to Camera", and "HTTP Port Num-
ber", of the cameras for displaying in the multi-view screen. Up to 30
cameras can be entered.
Enter the information of own camera when displaying images of own
camera in the multi-view screen.
Camera information: Enter the camera name.
Access to Camera: Enter the camera IP address or a domain name or
other name.
HTTP port Number: Enter the HTTP port Number. "80" will be entered
as a default value.
Click the Save button save the settings.
NOTE
●
Register a domain name or a global IP address with all cameras when viewing
camera images on the Internet.
●
Multi-Screen is a maximum of 9 screens.
●
You cannot use these characters: ' "