User manual

9594
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
Admin Functions/User Operation Restriction Setting
Several setup items and operations can be made operable by users also.
1 Click "Admin. Function" in the Admin. Menu.
･ The sub menu for administrator function will appear.
2 Click "2. User Operation Restriction" in the sub menu.
･ A setup screen of "Administrator Function /User Operation Enable
Settings" will appear.
3 Set "User Operation Restriction" to "Enable".
4 Configure each setting items.
Set whether or not users also can set items in Camera/basic setting on
page 66.
Check "Enable": Users also can set.
Check "Disable": Users cannot set.
･ Click the Save button to save settings.
Administrator log-in name and password can be set.
1 Click "Admin. Functions" in the Admin. Menu.
･ The sub menu for administrator functions will appear.
2 Click "3. Date and Time" in the sub menu.
･ A setup screen of "Administrator Function /Date and Time" will
appear.
Administrator Function/Date and Time
3 Configure each setting items.
･ Click the Save button to save settings.
･ The settings will not be reflected unless the Save button is clicked.
● Set Date and Time Manually
The camera date and time can be set manually.
Select date and time.
● Time Zone
Select appropriate time zone.
● Date and time adjustment by NTP server
Time can be adjusted using the NTP server.
1) Select "ON" or "OFF" in function.
ON: Time is adjusted using the NTP server.
OFF: Time is not adjusted using the NTP server.
2) Enter a host name for the NTP server in "NTP server".(You cannot use
these characters: ' ")
3) Choose from the pull-down menu in "Time Adjustment Period".
4) Click "Test" button to check date and time are correctly obtained.