User manual
100
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
101
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
Log Management (Log Management/Browse and Delete)
The log display can be viewed and managed.
See"Log display" on page 107 for data in log display.
1 Click "Log Management" in the Admin. Menu.
・ The sub menu for Log Management will appear.
2 Click "1. Browse and Delete" in the sub menu.
・ A setup screen of "Log Management /Browse and delete" will
appear.
3 Looking up the log or setup items.
● Log Browse
The log is displayed.
● Filter Settings
To filter the log:
1) Select "Set Condition" in "Display."
2) Select appropriate option in "Display Condtion Settings".
3) Click the "Refresh Logs" button.
Only logs of set conditions will appear.
NOTE
●
Click the "Save Conditions" button to save conditions.
●
Click the "Delete Logs" button to delete logs.
●
In keyword you cannot use these characters: ' "
Alarm Terminals
You can connect a variety of sensors to the camera by using alarm terminals.
See following table for functions of each terminal.
■ Connecting External Alarm Devices to the Alarm Input/
Output Terminals
・ Be sure to connect cables of external alarm devices before con-
necting
AC adaptor cable and LAN cable to the camera.
Name
ALARM IN
ALARM OUT
GND
Function
Alarm Input
Alarm Output
GND
Description
・
Inputs External Alarm signal.
You can choose the type of input signal:
Normal Opened (NO) or Normal Closed (NC).
Connect a sensor or other devices to the
camera.
・Outputs open corrector.
Max.DC 24V, 50mA.
Output holding time follows the those of
Alarm Settings/Alarm Output. (→page 84)
GND for a signal
ALARM OUT
Alarm output terminal
ALARM IN
Alarm input terminal
GND