NETWORK CAMERA Model IK-WR01A Safety Precautions For information on the latest products and peripheral devices, refer to the following Web page. ■ http://www.netcam.toshiba.com ●The above URL is subject to change without prior notice. If the URL changes, refer to the Toshiba website (http://www.cctv.toshiba.com). ●The Operations Manual for this product is included on the supplied CD-ROM. ●These Safety Precautions appy to firmware version R 1.01 and later.
Introduction Thank you for purchasing the IK-WR01A Network Camera. Before you start using the camera, read these Safety Precautions carefully to ensure correct usage. Once you have finished reading these Safety Precautions, keep it in a convenient place for future reference. The design, specifications, software, and manual contents are subject to change without prior notice. Some pictures and illustrations contained herein may slightly differ from the actual images.
Accessories Confirm that all of the following accessories have been supplied with the network camera. (a) CD-ROM ...................................................... 1pc. Includes the Operations Manual and the software Camera Finder. (b) WARRANTY ................................................. 1pc. (c) Safety Precautions and Quick Start Guide (this document) .............. 1pc. * The Quick Start Guide is at the back of the Safety Precautions. (d) Mounting Base ...........................................
Table of Contents Introduction… ............................................................... 2 Table of Contents .......................................................... 4 IMPORTANT SAFEGUARDS ......................................... 5 NOTES ON USE AND INSTALLATION ........................ 10 Precautions for Use ..................................................... 11 Camera Installation Guide ..........................................
IMPORTANT SAFEGUARDS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety instructions and instruction manual should be retained for future reference. 3. Heed Warnings All warnings on the product and in the instruction manual should be adhered to. 4. Follow Instructions All operating and use instructions should be followed. 5. Cleaning Disconnect this video product from the power supply before cleaning. 6.
IMPORTANT SAFEGUARDS (Cont.) 9. Ventilation This video product should never be placed near or over a radiator or heat register. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. Power Sources This video product should be operated only from the type of power source indicated on the marking label.
16. Servicing Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 17. Damage Requiring service Disconnect this video product from the power supply and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video product. c.
IMPORTANT SAFEGUARDS (Cont.) The CAUTION label, shown on the above part, is attached on the camera. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
NOTES ON USE AND INSTALLATION • Do not aim the camera at the sun Do not aim the camera at the sun or point it at sun even if you are not shooting. • Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this not a malfunction. • Treat the camera with care Do not drop the camera or subject it to strong shock or vibration. Otherwise, the camera may malfunction.
Precautions for Use About the AC Adapter ● An AC adapter is not supplied with this model. If you want to use an AC adapter, you will need to provide an AC adapter capable of supplying at least 10 W. About the Power supply ● The IK-WR01A operates with one of the following power source: 12vDC, 24vAC or PoE. Set the power selection switch on the camera to the correct power source before turning the camera on. DO NOT RE-SET THE POWER SELECTION SWITCH WHEN THE UNIT IS ON.
Camera Installation Guide Installation Example Unit: mm (inches) 100mm (3.94inch) Wall ∅6mm (0.24inch) MINIMUN 20mm (0.79inch) SCREWx4 ∅4mm (0.16inch) 83.5mm (3.29inch) 46.0mm (1.81inch) SURFACE MOUNT INSTALLATION EIM-0010325 4/26/2000 The Installation Guide is for reference only. Mounting bracket is not included.
Unit: mm (inches) 100mm (3.94inch) Wall ∅6mm (0.24inch) MINIMUN 20mm (0.79inch) SCREWx4 ∅4mm (0.16inch) 83.5mm (3.29inch) 46.0mm (1.
Memo 14
TOSHIBA AMERICA INFORMATION SYSTEMS.