Operation Manual

26
Adjusting the Projected Image
Adjusting the Projector Image Height
foot adjuster
2
3
foot adjuster
button
The projector is equipped with an elevator foot for adjust-
ing the image height.
To raise the image:
1. Press the foot adjuster button

.
2. Raise the image to the desired height angle

, then re-
lease the button to lock the foot adjuster into position.
3. Use

to fi ne-tune the display angle.
To lower the image:
1. Press the foot adjuster button.
2. Lower the image, then release the button to lock the foot
adjuster into position.
3. Use

to fi ne-tune the display angle.
1
Tilt Adjusting Wheel
Installation (Continued)