Operator's Manual

123
The Group Broadcast Transmis-
sion feature allows you to send
a document to multiple remote
parties in a single operation.
Note that a Group Broadcast
Transmission requires all pages
to be scanned to memory prior
to dialing, and thus adequate re-
sidual memory is required.
NOTE:
If the optional handset is in-
stalled, the handset dialing is
not available.
Load the document face down
in the Document Tray (see page
88).
Adjust the resolution and con-
trast if desired (see page 89).
Press the One Touch Key pro-
grammed for the desired group.
Enter the Multi-address Trans-
mission Group Number (1 to
1999).
EXAMPLE:
To enter the Group Number
0001, press:
(Leading zeros, if any, may
be omitted.)
NOTE:
When an incorrect number
is entered, use
to de-
lete the preceding digits, or
press
once to start
over from the beginning.
When the correct Group Num-
ber is displayed, press:
ADVANCED FUNCTIONS - MULTI-ADDRESS TRANSMISSION (BROADCASTING)
Group Broadcast Transmission
Load the Document
1
Select the Group
Location
2
Enter the Group
Number
3
Press the START
Key
4
Standby Mode screen
Or, display the Group Dial Di-
rectory by pressing:
MAY-17-00 WED11:49
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
When document scan-
ning is completed:
After 2 seconds:
COMM. RESERVATION
ONE TOUCH = 35
COLORADO GRP
SCANNING INTO MEMORY
FILE NBR = xxx
RESIDUAL MEMORY 70%
COMM. RESERVATION
GROUP NBR =(1-1999)
COMM. RESERVATION
GROUP NBR =(1-1999)
1
Standby Mode screen
When document scan-
ning is completed:
After 2 seconds:
COMM. RESERVATION
GROUP NBR = 0001
COLORADO GRP
SCANNING INTO MEMORY
FILE NBR = xxx
RESIDUAL MEMORY 70%
+
ABB
DIRECTORY
GROUP
Go to Step 3.