Operator's Manual

146
Select the day of the week to
start polling. When the day-of-
week range is displayed cor-
rectly, press:
NOTES:
• To designate the start or
end day, use
/
to move the entry point.
• Press
/ to
change the day.
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods.
• One Touch Key Dialing
... See page 97
• Abbreviated Dialing
... See page 98
• Alphabet Dialing
... See page 99
• Keypad Dialing
... See page 100
After each entry, the selected
facsimile is displayed for 2 sec-
onds.
When all the remote facsimile
locations have been entered in
Step 6, press:
If the remote facsimile is a
TOSHIBA facsimile and a 4-
digit security code is pro-
grammed to the document to be
polled, go to Step 8.
If the remote facsimile is not a
TOSHIBA facsimile or no Secu-
rity Codes are in use, press:
No Security Code will be se-
lected and the facsimile will re-
turn to the Standby Mode.
The facsimile will automatically
start polling at the time set in
this procedure.
Enter the 4-digit security code
for the document to be re-
trieved.
Select the Day of the
Week
5
Enter the Number of
Remote Facsimile
6
Select the Security
Code Option
7
Enter the Security
Code
8
PROG. CONT. POLL.
ENTER TEL NUMBER,
ABB. NUMBER OR
ONE TOUCH KEY
PROG. CONT. POLL.
ONE TOUCH= 24
PORTLAND PLANT
PROG. CONT. POLL.
ENTER MORE OR
PRESS [START]
Repeat this procedure until all
remote facsimiles are entered.
When the 4-digit security code
is entered, press:
The procedure is now complete.
The display returns to the
Standby Mode.
The facsimile will automatically
start polling at the time set in
this procedure.
Continuous Polling - continued
POLLING
SECURITY CODE =11111
****