Operator's Manual

203
Press:
+
+
+
+
+
+
Relay Destination Report Setting
Display the RELAY
DEST. REPORT Menu
1
Select the desired option to
send a Relay result report to the
Originator terminal when this
DP120F/DP125F is the hub unit
used in a relay transmission.
This is only applicable if the
DP120F/DP125F is used as a
Hub unit for the relay transmis-
sion.
To ALWAYS send a report to
the Originator, press:
To only send a report when an
error has occurred, press:
To turn OFF Automatic sending
of report, press:
To send a first page image of
the facsimile document, press:
To not send a first page image
of the facsimile document,
press:
The following screen is dis-
played to confirm your selection.
OPERATION COMPLETED
PRINT 1ST PG IMAGE?
1.ON
2.OFF
SET RELAY END REPORT
1.ALWAYS
2.ON ERROR
3.OFF
Select the Option
for End Terminal
2
Set the Option for
First Page Image
3
After completing the Relay Des-
tination Report Setting, you may
continue to select other Report
settings referring to their associ-
ated pages for instruction, or
press
to exit the Report Setting mode
and return to the Standby Mode.