Operator's Manual

247
SPEAKER TEST
Select the SPEAKER
TEST Menu
1
Press:
+
+
+
+
The speaker test checks
speaker operation by changing
the volume output from the
speaker.
SPEAKER TEST
STOP TO COMPLETED
VOLUME= (0-7)
0 1 2 3 4 5 6 7
Select the SPEAKER
TEST Option
2
Select a speaker volume level
by using
or .
Level 0 produces no sound, and
Level 7 the maximum volume.
Speaker sound is output at the
volume level selected. Check
that all the volumes are output
normally. After checking, press:
SPEAKER TEST
ENTER TEST RESULT
1.OK
2.NG
Select the Test Result
Option
3
If all volumes are output nor-
mally, press:
If even one of them is not out-
put normally, press:
Completed the
SPEAKER TEST
4
The word “OPERATION COM-
PLETED” is displayed on the
screen and the unit returns to
the individual test selection
screen.
The result of the speaker test
can be confirmed with the self
test report. To print the self
test report, refer to “PRINTING
A TEST RESULT” on page
252.
If the result of the speaker test
is judged to be NG, call your
service representative.