T&C TEC Drawer Unit DRWST-53 SERIES Table of Contents TEC CORPORATION
l Request Regarding Maintenance 0 Cleaning n Utilize our maintenance * When cleaning the machines, be sure to first unplug the power cord from the outlet for safety reasons. services. After purchasing the machines, contact your sales agent once per year or so to have the inside of the machines cleaned. Otherwise, dust will build up inside the machines and may cause fire or malfunction. Cleaning is particularly effective before humid rainy seasons.
DRWST-53 EOI -19022 SERIES TABLE OF CONTENTS Page .. .. . . . .. .. . . .. . . .. . .. . . .. .. . . .. . .. . . .. . .. . . . .. .. . . .. . .. . . .. . . .. . .. .. .. .. . . . .. .. . . .. . .. . . .. . .. . . .. . .. . . .. . .. . . .. .. . . . .. ............. 1 1. INTRODUCTION 1 .l Precautions 2. APPEARANCE .. . . . .. . .. . .. . . .. . .. . . .. . . .. . .. .. .. . .. . .. . . .. .. . . . .. . .. . .. . . .. . .. . . .. .. . . . .. .. . . .. . .. . . .. . .. . . .. . .. . . .. . .. . . .. .. .
EOl-19022 DRWST-53 SERIES 1. INTRODUCTION Thank you for purchasing the TEC DRWST-53 Series Remote Drawer. This drawer can be connected to various terminals including the ST-4500 Series, which has been developed as a high-grade POS terminal. This drawer can be used as either first drawer or secondary drawer (the second drawer required). 1.I Precautions 1) Do not subject the equipment to sudden shocks.
DRWST-53 Accessory Parts sE”c P 0 ‘ITEC 9 Cash Drawer Cover Key (1 pc; 2 keys) Drawer Release Key (1 pc; 2 keys) Nylon Clamp (1 PC) 3. Turn the POWER the connector Flanged Screw (M4x8) (1 PC) Flanged Screw (M3X8) (1 PC) INSTALLING Connect EOl-19022 SERIES THE DRAWER SWITCH to OFF of the ST-4500 terminal before connecting of the Drawer Cable to DRWlT -2- of the Control Unit. the cables.
DRWST-53 4. HANDLING EOl-19022 SERIES OF THE DRAWER n Manual cash drawer releasing Opening the Drawer l Usually, the drawer is released automatically on finalizing each transaction. In the event of a power failure or othertroubles, the drawer can be opened in the following manner. 1) Insert the Drawer Release Key into the Drawer Release Lock and turn the key clockwise. The drawer will now open (Fig. 1). 2) The Drawer Release Key can be taken out by returning it to the original position.
EOl-19002 DRWST-53 SERIES 5. HOW TO FIX DRAWER IN PLACE ON THE TERMINAL To attach the drawer (DRWST-53) to the ST-4500 terminal and use this terminal as an integrated terminal, follow the procedure below. 1) Remove the top cover and the control unit from the ST-4500 terminal. Double Sems Screw (M3x8) Double Sems 2) Remove the cable holder that is attached to the rear of the bottom of the drawer.
DRWST-53 3) EOl-19022 SERIES Cut the grommet in the upper part of the drawer using a cutter. Take out the drawer cable from the upper part of the drawer and fix in place onto the drawer, using the nylon clamp and screw that are attached to the DRWST-53. Cable 4) Attach the drawer to the ST-4500 terminal and fix it in place with the screw fr Flanged Screw attached (M4x8) DRWST-53 -5- to the DRWST-53.
DRWST-53 6. SPECIFICATIONS Size 460 mm (W) x 430 mm (D) x 120 mm (H) (including the rubber feet) Weight 8.5 Kg Power Consumed 0.2 A Max. Interface with the Control Unit Drawer release signal and release sense signal (Power is supplied by the Control Unit : DC + 24 V) Ambient Temperature 0°C to 40°C Relative Humidity 10% to 90% RH (with non condensation Cable Length 1.
T&C TEC CORPORATION El PRINTED IN JAPAN EOI -19022
