User Manual

6
Connecting the DVB-T Dongle
Remove the cap from the DVB-T dongle, locate a free USB port on your computer and
plug in the dongle. Once the computer recognises the new hardware, the New Hardware
wizard will begin.
As the DVB-T is a Hi-Speed device, you may receive the following message if it is plugged
into an older USB 1.1 port. The DVB-T will still work with USB 1.1. Simply click on the X in
the top right-hand corner of this message.
You will see several messages during the installation of the DVB-T dongle. Please be
patient, as this process make take a few minutes.