User manual

24
2
Chapter
2
Connections
Connecting to an audio system (Continued)
Via HDMI output
HDMI compatible device
HDMI cable (supplied)
HDMI cable
(not supplied)
You may need to adjust the HDMI
audio output to match the
capabilities of your AV amplifier.
In this case, set “Digital out
HDMI” ( page 53) to “PCM”.
• Set “Digital out HDMI”
( page 53).
AV amplifier
HDMI input
HDMI input
HDMI output
Caution
When you are connecting (via the HDMI OUTPUT jack)
an AV decoder that does not have Dolby Digital or DTS
decoding capability, be sure to set “Digital out HDMI”
( page 53) to “PCM” or “Downmixed PCM”.
Otherwise, high volume sound may damage your
hearing as well as the speakers.
Note about audio capabilities
Dolby Digital Plus and DTS-HD (DTS core only)
capability limited to 5.1 channels.
DTS-HD processing of DTS core only. Full DTS-HD is
not supported.
Dolby TrueHD processing for two channels only.
HD-A1_02_E 24HD-A1_02_E 24 2/12/06 9:31:00 PM2/12/06 9:31:00 PM