User manual

3
Chapter
3
Playback (Basic)
28
Press (front panel) or
(remote control).
ON/STANDBY indicator
ON/STANDBY button
ON/STANDBY button
When the power turns on, ON/STANDBY
indicator on the front panel changes color from
red (standby mode) to green (operation).
11
Press ON/STANDBY.
The power turns off and ON/STANDBY indicator
on the front panel turns red (standby mode).
Note
If the player freezes for about 15 minutes or more
and will not respond to any buttons, holding
down ON/STANDBY button on the front panel for
about 10 seconds can force the player to turn
off. However, this is an emergency measure,
which may cause damage to the player. Avoid
casual use of this measure.
Powering on/Loading a disc
11
Notes
Use the button on the front panel or the remote control
to open and close the disc tray. Do not push or hold
the disc tray while it is moving. Doing so may cause
the player to malfunction.
Do not load a disc which is unplayable, or any object
other than a playable disc.
Do not apply downforce to the disc tray. Doing so may
cause the player to malfunction.
If the disc tray stops while closing, the mechanical
protection system of this player will open it. Do not
force it to close. Doing so may damage the disc tray.
If the disc tray will not open, turn the player off, and
press OPEN/CLOSE on the front panel. This may turn
the player on and open the disc tray. If it still won’t
open, contact your nearest TOSHIBA dealer.
Press (front panel) or
(remote control).
The player opens the door and then the disc
tray.
Place a disc in the hollow of the
disc tray with the playback side
down.
When using a
double-sided disc,
turn the label of the
playing side up.
After placing a disc, press DOOR (see right) or
OPEN/CLOSE.
11
22
Turning the power on
Turning the power off
Loading a disc
HD-A1_03_E 28HD-A1_03_E 28 2/11/06 6:02:03 AM2/11/06 6:02:03 AM